D-Link switches are economical to own, simple to operate, & flexible for use in a variety of applications. They present effective, affordable & easy-to-implement solutions to meet demands for higher network loads & quicker response time in small workgroups or medium-sized departments.\n\n Blazing speed & raw power are what you get from top-of-the-line DES-1008 switches. Ultimate 10BASE-T/100BASE-TX flexibility is achieved through a series of NWay ports, & in full duplex mode, any workstation in your network can receive 20 Mbps or 200 Mbps of data from any port.\n\n Complies with IEEE 802.3 & IEEE802.3u Standards. \n 8 NWay 10M/100M auto-detect Ethernet/ Fast Ethernet ports. \n Full/ Half duplex for each port. \n Operating at maximum packet filtering & forwarding rate. Feature Feature Value Basic switching RJ-45 Ethernet ports quantity 8 Full duplex YMAC address table 8000 entries Maximum data transfer rate 0.1 Gbit/s Packet buffer memory 0.256 MBData link protocols Ethernet, Fast Ethernet Power consumption (typical)2 WOperating temperature (T-T)0
- 50 &176;CStorage temperature (T-T)-10
- 70 &176;COperating relative humidity (H-H)10
- 90% Data transfer rate 100 Mbit/s Connectivity technology Wired Power requirements DC 7.5V/1AI/O ports 10/100 Mbps x 8


...

8-Port Desktop Switch with 4 Power over Ethernet (Po E) ports\n\n The DES-1008P 8-Port switch can convey power to up to four network devices via the usual network cables using Power over Ethernet technology. This provides a cost-effective entry-level solution for users wishing to make the most of their network. The DES-1008P enables users to easily connect & supply power to devices such as wireless Access Points (AP), IP cameras & IP phones via the common network cables.\n\n As a switch, the DES-1008P can be used to share files, music & video across your network or create a multi-player gaming environment. Users can also add multiple computers, printers, Network Attached Storage (NAS) & any other Ethernet device onto a network.\n\n This device runs ultra-quiet, making it ideal for both home & small office use. In addition, it can be wall-mounted to save desktop space.\n\n IEEE 802.3af Power over Ethernet (Po E)\n\n Four out of the eight ports on the DES-1008P support the IEEE 802.3af standard for Power over Ethernet (Po E). Each of these ports can supply up to 15.4W, up to a total Po E budget of 56W, allowing users to attach IEEE 802.3af-compliant devices without requiring an additional power source.\n Networking devices receiving power in this way do not need to be placed within close proximity of a power outlet, allowing greater flexibility for their placement.\n Compliance with IEEE 802.3af also means that when a compliant device is attached, the switch automatically adjusts the power supplied to that device.\n For non-compliant devices, a Po E adapter such as D-Link&153;s DWL-P50 can be used to still allow the switch to be the power source.\n\n Superior performance\n\n The switch is completely unmanaged, so no configuration is required & installation is quick & easy. Support for auto-MDI/MDI-X on all ports eliminates the need for crossover cables for connection to another switch or hub. Auto-negotiation on each port senses the link speed of a network device (either 10 Mbps or 100 Mbps) & intelligently adjusts for compatibility & optimal performance.\n The DES-1008P also features diagnostic LEDs that display status & activity, allowing you to quickly detect & correct problems on the network. With wire-speed filtering & store-&-forward switching, the DES-1008P also maximizes network performance while minimising the transmission of bad network packets. Combining the convenience of Po E, superior performance, & ease of use, the D-Link DES-1008P is the ideal choice for adding Po E devices to either a home or a small business network.\n\n Hassle-free set-up\n\n The DES-1008P is a plug-&-play device requiring no configuration, which makes set-up simple & hassle-free. Feature Feature Value Switch type Unmanaged Basic switching RJ-45 Ethernet ports quantity 8 Basic switching RJ-45 Ethernet ports type Fast Ethernet (10/100) Fast Ethernet (copper) ports quantity 8 Networking standards IEEE 802.3, IEEE 802.3af, IEEE 802.3u, IEEE 802.3x 10G support N Flow control support YMAC address table 1000 entries Switching capacity 1.6 Gbit/s Store-&-forward Y Maximum data transfer rate 1 Gbit/s Packet buffer memory 0.09 MBProduct colour Black LED indicators LAN, Po E, Power Safety LVDCertification FCC, CE, VCCIInput current 1.45 APower consumption (typical)69 WPower over Ethernet (Po E)YPower over Ethernet (Po E) ports quantity 4 Total Power over Ethernet (Po E) budget 52 WOperating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-10
- 70 &176;COperating relative humidity (H-H)10
- 95% Storage relative humidity (H-H)5
- 90% Width 170.2 mm Depth 99.1 mm Height 27.9 mm Weight 454 g Input voltage 48 V



...

8-Port Desktop Switch with 4 Power over Ethernet (Po E) ports\n\n The DES-1008P 8-Port switch can convey power to up to four network devices via the usual network cables using Power over Ethernet technology. This provides a cost-effective entry-level solution for users wishing to make the most of their network. The DES-1008P enables users to easily connect & supply power to devices such as wireless Access Points (AP), IP cameras & IP phones via the common network cables.\n\n As a switch, the DES-1008P can be used to share files, music & video across your network or create a multi-player gaming environment. Users can also add multiple computers, printers, Network Attached Storage (NAS) & any other Ethernet device onto a network.\n\n This device runs ultra-quiet, making it ideal for both home & small office use. In addition, it can be wall-mounted to save desktop space.\n\n IEEE 802.3af Power over Ethernet (Po E)\n\n Four out of the eight ports on the DES-1008P support the IEEE 802.3af standard for Power over Ethernet (Po E). Each of these ports can supply up to 15.4W, up to a total Po E budget of 56W, allowing users to attach IEEE 802.3af-compliant devices without requiring an additional power source.\n Networking devices receiving power in this way do not need to be placed within close proximity of a power outlet, allowing greater flexibility for their placement.\n Compliance with IEEE 802.3af also means that when a compliant device is attached, the switch automatically adjusts the power supplied to that device.\n For non-compliant devices, a Po E adapter such as D-Link&153;s DWL-P50 can be used to still allow the switch to be the power source.\n\n Superior performance\n\n The switch is completely unmanaged, so no configuration is required & installation is quick & easy. Support for auto-MDI/MDI-X on all ports eliminates the need for crossover cables for connection to another switch or hub. Auto-negotiation on each port senses the link speed of a network device (either 10 Mbps or 100 Mbps) & intelligently adjusts for compatibility & optimal performance.\n The DES-1008P also features diagnostic LEDs that display status & activity, allowing you to quickly detect & correct problems on the network. With wire-speed filtering & store-&-forward switching, the DES-1008P also maximizes network performance while minimising the transmission of bad network packets. Combining the convenience of Po E, superior performance, & ease of use, the D-Link DES-1008P is the ideal choice for adding Po E devices to either a home or a small business network.\n\n Hassle-free set-up\n\n The DES-1008P is a plug-&-play device requiring no configuration, which makes set-up simple & hassle-free. Feature Feature Value Switch type Unmanaged Basic switching RJ-45 Ethernet ports quantity 8 Basic switching RJ-45 Ethernet ports type Fast Ethernet (10/100) Fast Ethernet (copper) ports quantity 8 Networking standards IEEE 802.3, IEEE 802.3af, IEEE 802.3u, IEEE 802.3x 10G support N Flow control support YMAC address table 1000 entries Switching capacity 1.6 Gbit/s Store-&-forward Y Maximum data transfer rate 1 Gbit/s Packet buffer memory 0.09 MBProduct colour Black LED indicators LAN, Po E, Power Safety LVDCertification FCC, CE, VCCIInput current 1.45 APower consumption (typical)69 WPower over Ethernet (Po E)YPower over Ethernet (Po E) ports quantity 4 Total Power over Ethernet (Po E) budget 52 WOperating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-10
- 70 &176;COperating relative humidity (H-H)10
- 95% Storage relative humidity (H-H)5
- 90% Width 170.2 mm Depth 99.1 mm Height 27.9 mm Weight 454 g Input voltage 48 V



...

'- Plug & Play operation\n- 5 Fast Ethernet ports\n- Non-blocking architecture: simultaneous full speed on all ports\n- Fanless, silent operation to fit in any environment\n- Quality of Service (Qo S) queues for traffic prioritisation\n- Solidly built with metal housing\n- D-Link Green&132;&162; technology, saves energy & increases the product&153;s lifespan\n\n D-Link&153;s DES-105 Fast Ethernet switch provides a cost-effective way for SOHO & SMB to create a small network & connect computers, wireless Access Points, IP cameras, network printers & other Ethernet devices quickly & easily without complicated configurations. This switch comes with 5 Fast Ethernet ports with an auto-sensing function to detect the maximum speed of the connected devices, allowing you to run your network with the best possible performance. Its fanless design makes this switch completely silent, ideal for offices, libraries or meeting rooms.\n\n Robust design\n\n The DES-105 are designed with durability & performance in mind. The sturdy metal housing will protect the switch against accidental harm, while helping to dissipate heat & to reduce stress on internal components. The visible LEDs allow for an easy reading of each port status, helping to troubleshoot connectivity problems. For a convenient placement, this switch comes with a wall mounting kit & a slot for a Kensington security lock to protect it from theft.\n\n Qo S (Quality of Service)\n\n Despite being an unmanaged, Plug & Play switch, the DES-105 is able to classify network traffic by assessing the 802.1p field in the Ethernet frames, & forward them out of its ports depending on their priority. This allows for a smooth integration of video, voice & data traffic without delays or loss of quality.\n\n Power-saving technology\n\n The DES-105 is part of D-Link Green&132;&162;, D-Link&153;s eco-friendly technology, providing energy savings, reduced power consumption, & a longer product lifespan without sacrificing operational performance or functionality. This switch implement the 802.3az Energy Efficient Ethernet (EEE) standard, which can save a substantial amount of energy by detecting the port status, putting them in low-power, st&-by mode when no network traffic is detected. This helps businesses to save money by reducing their electricity bills with no compromise on performance. Feature Feature Value Quality of Service (Qo S) support Y Basic switching RJ-45 Ethernet ports quantity 5 Power connector DC-in jack Networking standards IEEE 802.1p, IEEE 802.3, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x 10G support N Copper ethernet cabling technology 100BASE-TX, 10BASE-TFull duplex Y Flow control support Y Auto MDI/MDI-XYMAC address table 2000 entries Switching capacity 1 Gbit/s Supported data transfer rates 10/100 Mbps Store-&-forward Y Jumbo frames support Y Packet buffer memory 0.384 MBMAC address filtering Y Rack mounting N Product colour Black Housing material Metal LED indicators Link, Power Certification Ro HS, FCC Class B, ICES-003 Class B, CE Class B, C-Tick Class B, VCCI Class B, c UL, CBMean time between failures (MTBF)495709 h Input current 1 APower consumption (typical)1.9 WOperating temperature (T-T)0
- 50 &176;CStorage temperature (T-T)-10
- 70 &176;COperating relative humidity (H-H)10
- 90% Storage relative humidity (H-H)5
- 90% Weight 265 g Data transfer rate 200 Mbit/s Dimensions (Wx Dx H)100 x 98 x 28 mm Connectivity technology Wired Input voltage 5 V



...

- Plug & Play operation
- 8 Fast Ethernet ports
- Non-blocking architecture: simultaneous full speed on all ports
- Fanless,


...

D-Link DES-1100-16/24 is the latest series of Easy Smart Switches. Equipped with 16 or 24 10/100 Mbps ports, the series integrates basic configurable functions that provide performance & scalability. With easy to use management interface via PC Utility or Web Browser, these Easy Smart series help customers to quickly & easily deploy their network. The DES-1100 Series provides a complete & affordable solution for Small & Medium Business or communities without IT staff. They are suitable for Enterprise deployment, such as branch offices & meeting rooms that require simple management. Management options for the switches include Web Management & Smart Console Utility. The series also supports Layer 2 features such as Port Mirroring, Statistics & IGMP Snooping to optimize performance for multicast applications. Both models come with an innovative fanless design in compact 11"metal cases. Resilience/ Performance Enhancement Equipped with a complete lineup of L2 features, these switches include IGMP Snooping & Port Mirroring. Network maintenance features include Loopback Detection & Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port & automatically shuts down the affected port. Cable Diagnostics is designed for network administrators to quickly examine the quality of the copper cables & also determine the type of cable error. For Quality of Service (Qo S), the switches support 802.1p. This standard is a mechanism that allows real-time traffic classification into 8 priority levels mapped to 4 queues. Traffic & Security Features The DES-1100 series supports 802.1Q VLAN & Portbased VLAN, for traffic segregation. The bandwidth control feature allows network administrators to define the throughput levels for each port in order to manage bandwidth. It also provides fine granularity to define the ingress/egress traffic limits down to 512 kbps segments. The Storm Control feature allows detection when broadcast, multicast or unknown unicast traffic hit the definable threshold. The switch will start blocking or discarding packets which would otherwise ?flood′ the network. The blocked port will be activated only when the broadcast or multicast traffic falls below the defined threshold. Port Mirroring helps administrators facilitate traffic diagnostics or track switch performance & alter when necessary. Versatile Management The Easy Smart Switches supports an intuitive Smart Console utility & a web-based management interface that enables administrators to remotely control their network down to the port level. The Smart Console easily allows customers to discover multiple D-Link Easy Smart Switches within the same L2 network segment. With this utility, users do not need to change the IP address of their PC & it also provides an easy initial setting of the Smart Switches. Switches within the same L2 network segment that are connected to the user′s local PC are displayed on screen for instant access. This enables discovered devices basic switch configuration settings such as password changes & firmware upgrades. ...

- Intuitive Web GUI.
- Po E safeguard function.
- VLAN support for traffic segmentation.
- Auto Voice & Auto Surveillance


...

24/48-Port Web Smart Switch III D-Link′s DES-1210 Series is the latest generation of Web Smart Switches. Equipped with 24 or 48 10/100 Mbps ports, 2 10/100/1000BASE-T ports, & 2 combo 10/100/1000BASE-T/SFP ports, the series integrates advanced management & security functions that provide performance & scalability. While easy to use, the DES-1210 Series provides a complete & affordable solution for small & medium businesses. Management options for the switches include SNMP, Web Management, Smart Console Utility, & Compact Command Lines. The series also supports ACL filtering & D-Link′s Safeguard Engine. Furthermore, the DES-1210-28/52 uses Auto Voice VLAN, ensuring higher priority for voice traffic. Both models come with an innovative fanless design in 19" metal cases. Seamless Integration The Web Smart Switches are designed to provide SMB users a complete control over the network. With Ethernet & Gigabit copper ports capable of connecting to existing Cat.5 twisted-pair cables, these switches eliminate the need for a complex reconfiguration process. The DES-1210 Series allows for flexible connection to a backbone or servers. in addition, all ports support auto-negotiation of MDI/MDIX crossover, or configurable auto MDI & therefore do away with crossover cables or uplink ports. This brings inexpensive & easy connectivity to your desktop. Extensive Layer 2 Features Equipped with a complete lineup of L2 features, these switches include IGMP Snooping, Port Mirroring, Spanning Tree & Link Aggregation Control Protocol (LACP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection & Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port & automatically shut down the affected port. Cable Diagnostics is designed for network administrators to quickly examine the quality of the copper cables & also determine the type of cable error. Qo S, Bandwidth Control The switches are perfect for deployment in a Vo IP environment, as they support Auto Voice VLAN & Differentiated Services Code Point (DSCP) Qo S for Vo IP application. Auto Voice VLAN will automatically place voice traffic from an IP phone to an assigned VLAN & by doing so enhance the Vo IP service. With a higher priority & individual VLAN, this feature guarantees the quality & security of Vo IP traffic. DSCP marks parts of an IP packet, enabling different levels of service to be assigned for network traffic. With Bandwidth Control, the network administrator can reserve bandwidth for important functions that require a larger bandwidth or might have high priority. Secure your Network D-Link′s innovative Safeguard Engine function protects the switches against traffic flooding caused by virus attacks. The switches support 802.1X portbased authentication, allowing the network to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security & helps to protect the internal IT network. With the IP-MAC-Port Binding (DHCP Snooping) feature, the switch snoops DHCP information in order to automatically learn IP-MACPort Binding pairs & create a white list. Whenever cyber crime or hacking attempts are found, the IP change is kept under control & the location of the IP address becomes traceable. For added security, the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorized IP assignment. Versatile Management The new generation of Web Smart Switches provides growing businesses simple & easy management of their network using an intuitive Smart Console utility or a web-based management interface that enables administrators to remotely control their network down to the port level. The Smart Console easily allows customers to discover multiple D-Link Web Smart Switches within the same L2 network segment. With this utility, users do not need to change the IP address of their PC & it also provides an easy initial setting of the Smart Switches. Switches within the same L2 network segment that are connected to the user′s local PC are displayed on screen for instant access. This allows extensive switch configuration settings & basic configuration of discovered devices such as password changes & firmware upgrades. The DES-1210 Series also supports D-View 6.0 & Compact Command Line Interface (CLI) through Telnet. D-View 6.0 is a Network Management System that allows for the central management of critical network characteristics such as availability, reliability, resilience, & security in a consistent way. D-View 6.0 provides a useful set of tools for network administrators who want to effectively manage device configurations, fault tolerance, performance, & security. CLI management of the switches is possible via Telnet. This makes the adjustment of basic settings like password changes or firmware & configuration file uploads possible. ...

The DES-1210-28 is part of D-Link′s third generation of Web Smart Switches that integrates advanced management & security functions for performance & scalability. While easy to use, the DES-1210-28 provides a complete & affordable solution for small & medium businesses (SMB). It

Includes:: an innovative fanless design in a 19" metal case. Seamless Integration All ports support auto-negotiation of MDI/MDIX crossover, making crossover cables or uplink ports redundant. This brings inexpensive & easy connectivity to your desktop. At 2000 Mbps Full Duplex, the Gigabit uplinks provide high-speed data pipes to servers or a backbone with minimum data transfer loss. Comprehensive Security D-Link′s innovative Safeguard Engine function protects the switch against traffic flooding caused by virus attacks. In addition, the switch supports Access Control Lists (ACL) & 802.1X port-based authentication through external RADIUS servers. IP-MAC-Port Binding allows administrators to trace the location of IP addresses by binding the source IP to its associated MAC address & source port. For added security, the DHCP Server Screening feature 1 screens rogue DHCP server packets from user ports to prevent unauthorised IP assignment. Qo S & bandwidth control The switch is ideal for deployment in a Vo IP environment, as it supports Auto Voice VLAN & Differentiated Services Code Point (DSCP) Qo S for Vo IP application. Auto Voice VLAN will automatically place voice traffic from an IP phone to an assigned VLAN & by doing so enhance the Vo IP service. With a higher priority & individual VLAN, this feature guarantees the quality & security of Vo IP traffic. DSCP marks parts of an IP packet, enabling different levels of service to be assigned for network traffic. With Bandwidth Control, the network administrator can reserve bandwidth for important functions that require a larger bandwidth or higher priority. Extensive Layer 2 features The switch is equipped with a complete lineup of Layer 2 features, including IGMP Snooping, Port Mirroring, Spanning Tree & Link Aggregation Control Protocol (LACP). Network maintenance features include Loopback Detection & Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port & automatically shut down the affected port. Cable Diagnostics is designed for network administrators to quickly examine the quality of the copper cables & also determine the type of cable error. Versatile Management This third generation of Web Smart Switches provides growing businesses with simple & easy management of their network using an intuitive Smart Console utility or a web-based management interface. The Smart Console easily allows administrators to discover multiple D-Link Web Smart Switches within the same L2 network segment: switches are displayed on screen for instant access. With this utility, users do not need to change the IP address of their PC; it also provides an easy initial set up of the Smart Switches. This allows extensive switch configuration settings & basic configuration of discovered devices such as password changes & firmware upgrades. The DES-1210-28 also supports D-View 6.0 & Compact Command Line Interface (CLI) through Telnet. D-View 6.0 is a Network Management System that allows for the central management of critical network characteristics such as availability, reliability, resilience, & security in a consistent way. D-View 6.0 provides a useful set of tools for network administrators who want to effectively manage device configurations, fault tolerance, performance, & security.

...

24/48-Port Web Smart Switch III D-Link′s DES-1210 Series is the latest generation of Web Smart Switches. Equipped with 24 or 48 10/100 Mbps ports, 2 10/100/1000BASE-T ports, & 2 combo 10/100/1000BASE-T/SFP ports, the series integrates advanced management & security functions that provide performance & scalability. While easy to use, the DES-1210 Series provides a complete & affordable solution for small & medium businesses. Management options for the switches include SNMP, Web Management, Smart Console Utility, & Compact Command Lines. The series also supports ACL filtering & D-Link′s Safeguard Engine. Furthermore, the DES-1210-28/52 uses Auto Voice VLAN, ensuring higher priority for voice traffic. Both models come with an innovative fanless design in 19" metal cases. Seamless Integration The Web Smart Switches are designed to provide SMB users a complete control over the network. With Ethernet & Gigabit copper ports capable of connecting to existing Cat.5 twisted-pair cables, these switches eliminate the need for a complex reconfiguration process. The DES-1210 Series allows for flexible connection to a backbone or servers. in addition, all ports support auto-negotiation of MDI/MDIX crossover, or configurable auto MDI & therefore do away with crossover cables or uplink ports. This brings inexpensive & easy connectivity to your desktop. Extensive Layer 2 Features Equipped with a complete lineup of L2 features, these switches include IGMP Snooping, Port Mirroring, Spanning Tree & Link Aggregation Control Protocol (LACP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection & Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port & automatically shut down the affected port. Cable Diagnostics is designed for network administrators to quickly examine the quality of the copper cables & also determine the type of cable error. Qo S, Bandwidth Control The switches are perfect for deployment in a Vo IP environment, as they support Auto Voice VLAN & Differentiated Services Code Point (DSCP) Qo S for Vo IP application. Auto Voice VLAN will automatically place voice traffic from an IP phone to an assigned VLAN & by doing so enhance the Vo IP service. With a higher priority & individual VLAN, this feature guarantees the quality & security of Vo IP traffic. DSCP marks parts of an IP packet, enabling different levels of service to be assigned for network traffic. With Bandwidth Control, the network administrator can reserve bandwidth for important functions that require a larger bandwidth or might have high priority. Secure your Network D-Link′s innovative Safeguard Engine function protects the switches against traffic flooding caused by virus attacks. The switches support 802.1X portbased authentication, allowing the network to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security & helps to protect the internal IT network. With the IP-MAC-Port Binding (DHCP Snooping) feature, the switch snoops DHCP information in order to automatically learn IP-MACPort Binding pairs & create a white list. Whenever cyber crime or hacking attempts are found, the IP change is kept under control & the location of the IP address becomes traceable. For added security, the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorized IP assignment. Versatile Management The new generation of Web Smart Switches provides growing businesses simple & easy management of their network using an intuitive Smart Console utility or a web-based management interface that enables administrators to remotely control their network down to the port level. The Smart Console easily allows customers to discover multiple D-Link Web Smart Switches within the same L2 network segment. With this utility, users do not need to change the IP address of their PC & it also provides an easy initial setting of the Smart Switches. Switches within the same L2 network segment that are connected to the user′s local PC are displayed on screen for instant access. This allows extensive switch configuration settings & basic configuration of discovered devices such as password changes & firmware upgrades. The DES-1210 Series also supports D-View 6.0 & Compact Command Line Interface (CLI) through Telnet. D-View 6.0 is a Network Management System that allows for the central management of critical network characteristics such as availability, reliability, resilience, & security in a consistent way. D-View 6.0 provides a useful set of tools for network administrators who want to effectively manage device configurations, fault tolerance, performance, & security. CLI management of the switches is possible via Telnet. This makes the adjustment of basic settings like password changes or firmware & configuration file uploads possible. ...