What This Product Does\n With a passive twin-ax cable assembly of 1 meter & two SFP+ connectors on each side, TL-SM5220-1M is suitable for short distances & offers a cost-effective way to connect within racks & across adjacent racks.\n\n\n\n\n\n Product Model: 1 Meter 10G SFP+ Direct Attach Cable\n\n\n ...

What This Product Does\n With a passive twin-ax cable assembly of 1 meter & two SFP+ connectors on each side, TL-SM5220-1M is suitable for short distances & offers a cost-effective way to connect within racks & across adjacent racks.\n\n\n\n\n\n Product Model: 1 Meter 10G SFP+ Direct Attach Cable\n\n\n ...

https://youtu.be/lqm Qsx Hc QU0\n\n What This Product Does\n TP-Link TL-SG1210MPE is an easy smart switch with 9&151; gigabit RJ45 ports & 1&151; gigabit combo SFP/RJ45 port that requires no configuration. With 8&151; Po E (Power over Ethernet) ports, it can automatically detect & supply power with all IEEE 802.3af/at compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc.\n \n Professional 10-Port Switch with 8-Port Po E+ (123 W Budget) for Numerous Applications\n Compliance with the 802.3af/at Po E+ standard supports up to 30 W on each Po E port. The total 123 W Po E power budget* for the 8&151; Po E+ ports opens up a wide range of applications, such as surveillance for offices, dormitories, & small businesses. It is fully compatible with IP cameras, access points, IP phones, computers, printers, & more.\n\n \n System Self-Healing with Po E Auto Recovery\n The switch automatically detects & reboots the PD devices, such as cameras & APs, when they fall offline or go unresponsive, guaranteeing the stable operation of Po E-connected devices, without the need for manual monitoring & restart.\n \n Intelligent Power Management\n When total power consumption exceeds 123 W, the intelligent power management will cut the lower priority port power. This ensures the high-priority port&153;s power supply & protects the device from power overload. It also automatically detects & provides the required power for your Po E devices while protecting your Po E & non-Po E equipment from being damaged.\n \n Durable Metal Casing\n The interior components of TL-SG1210MPE are protected by high-quality metal casing to ensure a long product life. Its fanless design delivers zero added noise in its locations. Having passed an array of stringent reliability tests, TL-SG1210MPE delivers switching performance you can depend on.\n\n\n\n\n\n Product Model: 10-Port Gigabit Easy Smart Switch with 8-Port Po E+\n\n\n ...

https://youtu.be/lqm Qsx Hc QU0\n\n What This Product Does\n TP-Link TL-SG1210MPE is an easy smart switch with 9&151; gigabit RJ45 ports & 1&151; gigabit combo SFP/RJ45 port that requires no configuration. With 8&151; Po E (Power over Ethernet) ports, it can automatically detect & supply power with all IEEE 802.3af/at compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc.\n \n Professional 10-Port Switch with 8-Port Po E+ (123 W Budget) for Numerous Applications\n Compliance with the 802.3af/at Po E+ standard supports up to 30 W on each Po E port. The total 123 W Po E power budget* for the 8&151; Po E+ ports opens up a wide range of applications, such as surveillance for offices, dormitories, & small businesses. It is fully compatible with IP cameras, access points, IP phones, computers, printers, & more.\n\n \n System Self-Healing with Po E Auto Recovery\n The switch automatically detects & reboots the PD devices, such as cameras & APs, when they fall offline or go unresponsive, guaranteeing the stable operation of Po E-connected devices, without the need for manual monitoring & restart.\n \n Intelligent Power Management\n When total power consumption exceeds 123 W, the intelligent power management will cut the lower priority port power. This ensures the high-priority port&153;s power supply & protects the device from power overload. It also automatically detects & provides the required power for your Po E devices while protecting your Po E & non-Po E equipment from being damaged.\n \n Durable Metal Casing\n The interior components of TL-SG1210MPE are protected by high-quality metal casing to ensure a long product life. Its fanless design delivers zero added noise in its locations. Having passed an array of stringent reliability tests, TL-SG1210MPE delivers switching performance you can depend on.\n\n\n\n\n\n Product Model: 10-Port Gigabit Easy Smart Switch with 8-Port Po E+\n\n\n ...

What This Product Does\n TL-FC111A-20 is a 100M media converter, providing a 100M RJ-45 port & a 100M SC fiber port, which can convert between electrical & optical signals. & long-distance data transmission through optical fiber can be applied to commercial scenarios such as park security monitoring & wireless networking.\n\n How This Product Works\n TL-FC111A-20 adopts WDM (wavelength division multiplexing) technology, helping send & receive data at a distance of up to 20km (12.4 miles) over only one fiber, which saves half of the cable deployment cost for customers. TL-FC111A-20 transmits data at 1550nm wavelength & receives data at 1310nm wavelength on optical fiber. The TL-FC111A-20 works in the other end as a pair by receiving data at wavelength 1550nm & sending data at wavelength 1310nm.\n\n Other Features\n Besides, this media converter can be used as a standalone device (no rack required) or used with TP-Link&153;s TL-FC1420 rack for auto MDI/MDI-X in TX port in which duplex mode is automatically negotiated.\n\n\n\n\n\n Product Model: 10/100 Mbps WDM Media Converter\n\n\n ...

What This Product Does\n TL-FC111B-20 is a 100M media converter, providing a 100M RJ-45 port & a 100M SC fiber port, which can convert between electrical & optical signals. & long-distance data transmission through optical fiber can be applied to commercial scenarios such as park security monitoring & wireless networking.\n\n How This Product Works\n TL-FC111B-20 adopts WDM (wavelength division multiplexing) technology, helping send & receive data at a distance of up to 20km (12.4 miles) over only one fiber, which saves half of the cable deployment cost for customers. TL-FC111B-20 transmits data at 1310nm wavelength & receives data at 1550nm wavelength on optical fiber. The TL-FC111A-20 works in the other end as a pair by receiving data at a wavelength 1310nm & sending data at wavelength 1550nm.\n\n Other Features\n Besides, this media converter can be used as a standalone device (no rack required) or used with TP-Link&153;s TL-FC1420 rack for auto MDI/MDI-X in TX port in which duplex mode is automatically negotiated.\n\n\n\n\n\n Product Model: 10/100 Mbps WDM Media Converter\n\n\n ...

What This Product Does\n TL-FC111A-20 is a 100M media converter, providing a 100M RJ-45 port & a 100M SC fiber port, which can convert between electrical & optical signals. & long-distance data transmission through optical fiber can be applied to commercial scenarios such as park security monitoring & wireless networking.\n\n How This Product Works\n TL-FC111A-20 adopts WDM (wavelength division multiplexing) technology, helping send & receive data at a distance of up to 20km (12.4 miles) over only one fiber, which saves half of the cable deployment cost for customers. TL-FC111A-20 transmits data at 1550nm wavelength & receives data at 1310nm wavelength on optical fiber. The TL-FC111A-20 works in the other end as a pair by receiving data at wavelength 1550nm & sending data at wavelength 1310nm.\n\n Other Features\n Besides, this media converter can be used as a standalone device (no rack required) or used with TP-Link&153;s TL-FC1420 rack for auto MDI/MDI-X in TX port in which duplex mode is automatically negotiated.\n\n\n\n\n\n Product Model: 10/100 Mbps WDM Media Converter\n\n\n ...

\n TP-LINK 10/100 Mbps Multi-mode Media Converter network media converter 1310 nm\n \n \n \n \n \n \n Manufacturer:\n TP-LINK\n \n \n Category:\n Networking\n \n \n Sub-Category:\n Network Media Converters\n \n \n SKU:\n MC100CM\n \n \n EAN:\n 6935364030391 0017229107281 0191120078373 5054242026293 5053973919249 8459730303912 3548383119119 0741459772048 0804066559225 0809186265025 5269692722163 0801200934870 0617407577723 0723856183665 0808112549031 0807034595355 0758399146068 5907634583532 5054484135296 0803983008120 5054629099780 0809393878551 0845973030391\n \n \n \n \n\n Description\n \n \n
- Complies with 802.3u 10/100 Base-TX, 100 Base-FX standards.\n\n- Provides switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port.\n\n- Extends fiber distance up to 2km\n\n\n\n The MC100CM is a media converter designed to convert 100BASE-FX fiber to 100 Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100 Base-TX & 100 Base-FX standards, the MC100CM is designed for use with multi-mode fiber cable utilizing the SC-Type connector. The MC100CM supports shortwave (SX) laser

Specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting & receiving data.\n\n\n\n Other features of this module include the ability to be used as a stand alone device (no chassis required)or with TP-LINK&153;s 19&153;&153; system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, & front panel status LEDs. The MC100CM will transmit at extended fiber optic distances utilizing multi-mode fiber up to 2 kilometers.\n\n\n\n\n \n \n\n Specifications\n \n Technical details Wavelength 1310 nm Maximum transfer distance 2000 m I/O ports 1x 100M SC\n 1x 100M RJ45 Weight & dimensions Dimensions (Wx Dx H)94.5 x 73 x 27 mm Networking Cabling technology UTP 3, 4, 5e, 5 Ports & interfaces Connectivity technology Wired Performance Wavelength 1310 nm Maximum transfer distance 2000 m Design Compliance industry standards IEEE 802.3, IEEE 802.3u, IEEE 802.3x Certification FCC, CEOperational conditions Operating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-40
- 70 &176;COperating relative humidity (H-H)10
- 90% Storage relative humidity (H-H)5
- 90% Certificates Certification FCC, CEOther features Cabling technology UTP 3, 4, 5e, 5 Full duplex Yes Dimensions (Wx Dx H)94.5 x 73 x 27 mm Compliance industry standards IEEE 802.3, IEEE 802.3u, IEEE 802.3x I/O ports 1x 100M SC\n 1x 100M RJ45\n \n \n\n\n\n\n\n






...

\n TP-LINK 10/100 Mbps Single-mode Media Converter network media converter 1310 nm\n \n \n \n \n \n \n Manufacturer:\n TP-LINK\n \n \n Category:\n Networking\n \n \n Sub-Category:\n Network Media Converters\n \n \n SKU:\n MC110CS\n \n \n EAN:\n 6935364030407 0809186265032 0845973030407 0112840374064 0791445498292 0230494832980 8459730304070 0807030489559 0988808262212 0191120078380 5054484135302 5054533135307 5054629099797 0851975726729 0806293522812 0803983008137 0132018507209 0809385660010 0731215282034 0115971160506\n \n \n \n \n\n Description\n \n \n
- Complies with 802.3u 10/100 Base-TX, 100 Base-FX standards.\n\n- Provides switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port.\n\n- Extends fiber distance up to 20&2&188;&141;60km\n\n\n\n The MC110CS is a media converter designed to convert 100BASE-FX fiber to 100 Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100 Base-TX & 100 Base-FX standards, the MC110CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC110CS supports shortwave (SX) laser

Specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting & receiving data.\n\n\n\n Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK&153;s 19&153;&153; system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, & front panel status LEDs. The MC110CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers.\n \n \n\n Specifications\n \n Technical details Wavelength 1310 nm Maximum transfer distance 20000 m I/O ports 1x 100M SC\n 1x 100M RJ45 Weight & dimensions Dimensions (Wx Dx H)94.5 x 73 x 27 mm Networking Cabling technology UTP 3, 4, 5e, 5 Ports & interfaces Connectivity technology Wired Performance Wavelength 1310 nm Maximum transfer distance 20000 m Design Compliance industry standards IEEE 802.3, IEEE 802.3u, IEEE 802.3x Certification FCC, CEOperational conditions Operating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-40
- 70 &176;COperating relative humidity (H-H)10
- 90% Storage relative humidity (H-H)5
- 90% Certificates Certification FCC, CEOther features Cabling technology UTP 3, 4, 5e, 5 Full duplex Yes Dimensions (Wx Dx H)94.5 x 73 x 27 mm Compliance industry standards IEEE 802.3, IEEE 802.3u, IEEE 802.3x I/O ports 1x 100M SC\n 1x 100M RJ45\n \n \n\n\n\n\n\n






...

What This Product Does\n TL-FC111PB-20 is a 10/100 Mbps media converter with 802.3af Po E output, providing 1&151; 10/100 Mbps Po E RJ45 port & 1&151; 100 Mbps SC fiber port, which can convert between electrical & optical signals. With up to 20 km fiber transmission distance & 802.3af Po E output, the media converter is designed to address the needs of flexible long-range surveillance deployment with optical fibers. It provides an economical path towards extending the distance of an existing network.\n How This Product Works\n TL-FC111PB-20 adopts WDM (wavelength division multiplexing) technology, helping send & receive data at a distance of up to 20 km with only a single mode fiber, which saves half of the cable deployment cost for customers. TL-FC111PB-20 transmits data at 1310 nm wavelength & receives data at 1550 nm wavelength on optical fiber. Therefore, the terminal device used in conjunction with the TL-FC111PB-20 should send data at a wavelength of 1550 nm & receive data at a wavelength of 1310 nm. TP-Link another media converter TL-FC111A-20 is one of the products that can cooperate with TL-FC111PB-20.\n\n Other Features\n Besides, this media converter can be used as a standalone device (no rack required) or used with TP-Link's TL-FC1420 rack for auto MDI/MDI-X in TX port in which duplex mode is automatically negotiated.\n\n\n\n\n\n Product Model: 10/100 Mbps WDM Media Converter with 1-Port Po E\n Datasheet: https://d 5bm 31en 4blvo.cloudfront.net/pdf/mmo_90126725_1618561591_4338_20058.pdf&pipe; Datasheet: https://d 5bm 31en 4blvo.cloudfront.net/pdf/mmo_90126725_1618561598_9767_35950.pdf\n\n ...