This Ethernet to MM Fiber Media Converter creates a cost-effective Ethernet to fiber link, transparently converting to/from 10 Base-T or 100 Base-Tx Ethernet signals & 100 Base-Fx optical signals to extend an Ethernet network connection over a multimode fiber backbone.\n\n The converter supports a maximum multimode fiber optic cable distance of 2km (1.2 miles), providing a simple solution for connecting 10 Base-T/100 Base-Tx Ethernet networks to remote locations using ST-terminated multimode fiber, while delivering solid network performance & scalability.\n\n Easy to setup & install, this compact, value-conscious media converter features auto-switching MDI & MDI-X support on the RJ45 UTP connections as well as manual controls for UTP mode, speed, Full & Half Duplex, as well as LFP (Link Fault pass-through) on/off. Feature Feature Value Maximum data transfer rate 100 Mbit/s Cabling technology 10 Base-T, 100 Base-Tx, 100 Base-Fx Connectivity technology Wired Maximum transfer distance 2000 m Package width 5.71 mm Package depth 6.89 mm Package height 2.56 mm Interface LANFull duplex Y Fiber type MM, FX, ST ...

This Ethernet to MM Fiber Media Converter creates an economical, cost-effective Ethernet-fiber link, transparently converting to/from 10 Base-T or 100 Base-Tx Ethernet signals & 100 Base-Fx optical signals to extend an Ethernet network connection over a multimode fiber backbone. The converter supports a maximum multimode fiber optic cable distance of 2km (1.2 miles), providing a simple solution for connecting 10 Base-T/100 Base-Tx Ethernet networks to remote locations using SC-terminated multimode fiber, while delivering solid network performance & scalability. ...

This Ethernet to MM Fiber Media Converter creates an economical, cost-effective Ethernet-fiber link, transparently converting to/from 10 Base-T or 100 Base-Tx Ethernet signals & 100 Base-Fx optical signals to extend an Ethernet network connection over a multimode fiber backbone. The converter supports a maximum multimode fiber optic cable distance of 2km (1.2 miles), providing a simple solution for connecting 10 Base-T/100 Base-Tx Ethernet networks to remote locations using SC-terminated multimode fiber, while delivering solid network performance & scalability. ...

This Ethernet to MM Fiber Media Converter creates an economical, cost-effective Ethernet-fiber link, transparently converting to/from 10 Base-T or 100 Base-Tx Ethernet signals & 100 Base-Fx optical signals to extend an Ethernet network connection over a multimode fiber backbone.\n\n The converter supports a maximum multimode fiber optic cable distance of 2km (1.2 miles), providing a simple solution for connecting 10 Base-T/100 Base-Tx Ethernet networks to remote locations using SC-terminated multimode fiber, while delivering solid network performance & scalability. Feature Feature Value Maximum data transfer rate 100 Mbit/s Cabling technology 100 Base-Tx, 100 Base-Fx, 10 Base-TMaximum transfer distance 2000 m Interface LANFiber type MM, SC ...

This Ethernet to MM Fiber Media Converter creates an economical, cost-effective Ethernet-fiber link, transparently converting to/from 10 Base-T or 100 Base-Tx Ethernet signals & 100 Base-Fx optical signals to extend an Ethernet network connection over a multimode fiber backbone.\n\n The converter supports a maximum multimode fiber optic cable distance of 2km (1.2 miles), providing a simple solution for connecting 10 Base-T/100 Base-Tx Ethernet networks to remote locations using SC-terminated multimode fiber, while delivering solid network performance & scalability. Feature Feature Value Maximum data transfer rate 100 Mbit/s Cabling technology 100 Base-Tx, 100 Base-Fx, 10 Base-TMaximum transfer distance 2000 m Interface LANFiber type MM, SC ...

Add a 10/100 Mbps Ethernet port to a desktop computer through a PCI slot This 1 Port PCI Fast Ethernet Network Adapter Card offers a reliable, cost-effective Ethernet network connection. Delivering a simple connection to 10/100 Mbps Ethernet networks, the NIC features auto-negotiation that senses speed & duplex capabilities of connected devices & full duplex support for data transfer rates up to 200 Mbps. A versatile network interface solution, the NIC is supported by all popular operating systems including Windows, Linux, Mac OS & Novell platforms, & is backed by Star Tech.com's Lifetime Warranty. " * Cost effective & simple Ethernet networking for a desktop computer systems * Backed by a Star Tech.com lifetime warranty & free lifetime technical support" ...

Remove hot air from a computer case with a rear exhaust fan\n\n This high quality PCI Fan is an add-in cooling fan designed to fit in the PCI, ISA or AGP expansion slots of any computer. The PCI fan helps improve expansion card (video card, etc.) performance, by preventing overheating, making it a great video card cooler for older, hot-running 3D graphics cards like the Voodoo, TNT2, Ge Force 256 & more. Powered through a simple LP4 connection to the computer power supply, the quiet-running PCI Fan utilizes a brushless DC motor that helps maintain expansion card temperatures while creating minimal noise levels. Compact enough to fit into almost any expansion slot such that airflow can be directed as needed most, Star Tech.com's PCI Fan is backed by 2-year warranty & free lifetime technical support.\n\n The Star Tech.com Advantage\n\n- A full profile slot design to help remove hot air from large workstations & desktops\n- A small, quiet ball bearing fan keeps the air moving for better heat transfer\n- Backed by a Star Tech.com 2-year warranty & free lifetime technical support Feature Feature Value Suitable for Graphics card Type Cooler Rotational speed (max)2200 RPMNoise level (high speed)32 d B Maximum airflow 6.9 cfm Product colour Black Material Plastic Number of fans 1 fan (s) Ro HS compliance Y Voltage 12 VOperating temperature (T-T)-10
- 80 &176;CWidth 90 mm Depth 110 mm Height 20 mm Weight 100 g Package width 27.5 mm Package depth 168 mm Package height 200 mm Package weight 200 g Bearing technology Ball bearing Dimensions (Wx Dx H)90 x 110 x 20 mm Connector (s)1
- LP4 Male Rotational speed 2200 RPMPackage length 6.61 mm Airflow 6.9 CFM

...

Remove hot air from a computer case with a rear exhaust fan\n\n This high quality PCI Fan is an add-in cooling fan designed to fit in the PCI, ISA or AGP expansion slots of any computer. The PCI fan helps improve expansion card (video card, etc.) performance, by preventing overheating, making it a great video card cooler for older, hot-running 3D graphics cards like the Voodoo, TNT2, Ge Force 256 & more. Powered through a simple LP4 connection to the computer power supply, the quiet-running PCI Fan utilizes a brushless DC motor that helps maintain expansion card temperatures while creating minimal noise levels. Compact enough to fit into almost any expansion slot such that airflow can be directed as needed most, Star Tech.com's PCI Fan is backed by 2-year warranty & free lifetime technical support.\n\n The Star Tech.com Advantage\n\n- A full profile slot design to help remove hot air from large workstations & desktops\n- A small, quiet ball bearing fan keeps the air moving for better heat transfer\n- Backed by a Star Tech.com 2-year warranty & free lifetime technical support Feature Feature Value Suitable for Graphics card Type Cooler Rotational speed (max)2200 RPMNoise level (high speed)32 d B Maximum airflow 6.9 cfm Product colour Black Material Plastic Number of fans 1 fan (s) Ro HS compliance Y Voltage 12 VOperating temperature (T-T)-10
- 80 &176;CWidth 90 mm Depth 110 mm Height 20 mm Weight 100 g Package width 27.5 mm Package depth 168 mm Package height 200 mm Package weight 200 g Bearing technology Ball bearing Dimensions (Wx Dx H)90 x 110 x 20 mm Connector (s)1
- LP4 Male Rotational speed 2200 RPMPackage length 6.61 mm Airflow 6.9 CFM

...

Install a 34mm Express Card into a 54mm Express Card slot, without card slippage\n\n The ECBRACKET2 Express Card 34mm to 54mm Stabilizer Adapter helps prevent side-to-side movement of a 34mm Express Card, while the card is connected to a 54mm Express Card slot.\n\n The Express Card 34/54 stabilizer can be attached to almost any 34mm Express Card to provide added stability & security for your card adapter, including flushmount designed cards.\n\n The Express Card 34 stabilizer bracket comes in a package of three, so you won't need to swap adapters when using different EC cards.\n\n The Star Tech.com Advantage\n\n- Easily clips onto most 34mm Express Cards & provides stability inside 54mm Express Card slots\n- Works with flushmount designed Express Cards as well as traditional Express Card designs\n- Backed by a Star Tech.com 2-year warranty & lifetime technical support Feature Feature Value Product colour Black Quantity 3 Width 21 mm Depth 40 mm Height 3 mm Package width 90 mm Package depth 125 mm Package height 6 mm ...

Install a 34mm Express Card into a 54mm Express Card slot, without card slippage\n\n The ECBRACKET2 Express Card 34mm to 54mm Stabilizer Adapter helps prevent side-to-side movement of a 34mm Express Card, while the card is connected to a 54mm Express Card slot.\n\n The Express Card 34/54 stabilizer can be attached to almost any 34mm Express Card to provide added stability & security for your card adapter, including flushmount designed cards.\n\n The Express Card 34 stabilizer bracket comes in a package of three, so you won't need to swap adapters when using different EC cards.\n\n The Star Tech.com Advantage\n\n- Easily clips onto most 34mm Express Cards & provides stability inside 54mm Express Card slots\n- Works with flushmount designed Express Cards as well as traditional Express Card designs\n- Backed by a Star Tech.com 2-year warranty & lifetime technical support Feature Feature Value Product colour Black Quantity 3 Width 21 mm Depth 40 mm Height 3 mm Package width 90 mm Package depth 125 mm Package height 6 mm ...