'- 1000 Base-T Gigabit Ethernet copper connectivity\n- RJ45 connector\n- Fits into the SFP interfaces of GSM7328FS\n- Drives Gigabit Ethernet up to 100m distances with CAT5E/CAT6 cables Feature Feature Value Maximum data transfer rate 10000 Mbit/s Interface SFP ...

The M4300 Stackable L3 Managed Switch Series comes with 40G, 10G & 1G models in a variety of form factors including Po E+ full provisioning. SDN-ready with\n Open Flow 1.3, M4300 Switch Series delivers IPv 4/IPv 6 rich services for mid-enterprise edge & SMB core with mixed stacking between 40-, 10- & 1-Gigabit models.\n Layer 3 feature set

Includes:: static & policy-based routing, RIP, VRRP, OSPF, & PIM dynamic routing. M4300 is ideal for server aggregation, wireless access, unified\ncommunications & Video-over-IP. Feature Feature Value Ethernet interface type 40 Gigabit Ethernet Fiber optic connector QSFP+ Fiber ports quantity 2 Installed QSFP+ modules quantity 2 Compatibility Netgear M4300

...

The M4300 Stackable L3 Managed Switch Series comes with 40G, 10G & 1G models in a variety of form factors including Po E+ full provisioning. SDN-ready with\n Open Flow 1.3, M4300 Switch Series delivers IPv 4/IPv 6 rich services for mid-enterprise edge & SMB core with mixed stacking between 40-, 10- & 1-Gigabit models.\n Layer 3 feature set

Includes:: static & policy-based routing, RIP, VRRP, OSPF, & PIM dynamic routing. M4300 is ideal for server aggregation, wireless access, unified\ncommunications & Video-over-IP. Feature Feature Value Ethernet interface type 40 Gigabit Ethernet Fiber optic connector QSFP+ Fiber ports quantity 2 Installed QSFP+ modules quantity 2 Compatibility Netgear M4300

...

The M4300 Stackable L3 Managed Switch Series comes with 40G, 10G & 1G models in a variety of form factors including Po E+ full provisioning. SDN-ready with\n Open Flow 1.3, M4300 Switch Series delivers IPv 4/IPv 6 rich services for mid-enterprise edge & SMB core with mixed stacking between 40-, 10- & 1-Gigabit models.\n Layer 3 feature set

Includes:: static & policy-based routing, RIP, VRRP, OSPF, & PIM dynamic routing. M4300 is ideal for server aggregation, wireless access, unified\ncommunications & Video-over-IP. Feature Feature Value Ethernet interface type 10 Gigabit Ethernet Ethernet LAN data rates 100, 2500, 5000, 10000 Mbit/s Ethernet LAN (RJ-45) ports 8 Compatibility Netgear M4300 Power over Ethernet (Po E)Y

...

The M4300 Stackable L3 Managed Switch Series comes with 40G, 10G & 1G models in a variety of form factors including Po E+ full provisioning. SDN-ready with\n Open Flow 1.3, M4300 Switch Series delivers IPv 4/IPv 6 rich services for mid-enterprise edge & SMB core with mixed stacking between 40-, 10- & 1-Gigabit models.\n Layer 3 feature set

Includes:: static & policy-based routing, RIP, VRRP, OSPF, & PIM dynamic routing. M4300 is ideal for server aggregation, wireless access, unified\ncommunications & Video-over-IP. Feature Feature Value Ethernet interface type 10 Gigabit Ethernet Ethernet LAN data rates 100, 2500, 5000, 10000 Mbit/s Ethernet LAN (RJ-45) ports 8 Compatibility Netgear M4300 Power over Ethernet (Po E)Y

...

Wi Fi 6 high performance Po E Powered wireless connectivity for Small Office & Home Office\n\n The NETGEAR Wi Fi 6 AX3600 Po E Wireless Access Point (AP) delivers 802.11ax high performance wireless connectivity for Small Office & Home Office (SOHO) deployments & supports dual band concurrent Wi Fi 6 operations at 2.4 G Hz & 5 G Hz with a combined throughput of 3.6 Gbps (1200 Mbps at 2.4 G Hz & 2400 Mbps at 5 G Hz). The WAX218 Wi Fi 6 Access Point provides standalone configuration with easy setup for a reliable, Wi Fi 6 802.11ax high performance, & cost effective wireless solution. The WAX218 can be powered by Power- over-Ethernet or a DC power adapter.\n\n\n\n\n\n Product Model: AX3600\n\n\n ...

AXC765, AXC767, AXC7610, AXC7615 & AXC7620 are new Active or Active Optical DAC versions of 5-meter to 20-meter Direct Attach SFP+ cables for 10G network cabling between SFP+ devices (network switches, servers, storage). These DAC integrate active SFP+ compatible connectors with a copper twin-axial cable, or a duplex fiber optic cable into a low-latency, energy-efficient & low-cost cabling solution. All NETGEAR&174; Modules & Direct Attach Cables are backed by a NETGEAR limited 5-year Hardware Warranty.\n\n- 5-meter (16.4 ft) Active Direct Attach Cable for 10G SFP+ short run\n- Active SFP+ connector on both ends replacing SFP+ transceivers\n- Highest performance pre-terminated copper twin-axial cable\n- Low-latency, energy-efficient & low-cost transparent solution\n- 5-Year NETGEAR Limited Warranty Feature Feature Value Cable length 5 m Connector 1SFP+ Connector 2SFP+ Connector gender Male connector / Male connector Product colour Black Data transfer rate 10 Gbit/s ...

AXC765, AXC767, AXC7610, AXC7615 & AXC7620 are new Active or Active Optical DAC versions of 5-meter to 20-meter Direct Attach SFP+ cables for 10G network cabling between SFP+ devices (network switches, servers, storage). These DAC integrate active SFP+ compatible connectors with a copper twin-axial cable, or a duplex fiber optic cable into a low-latency, energy-efficient & low-cost cabling solution. All NETGEAR&174; Modules & Direct Attach Cables are backed by a NETGEAR limited 5-year Hardware Warranty.\n\n- 5-meter (16.4 ft) Active Direct Attach Cable for 10G SFP+ short run\n- Active SFP+ connector on both ends replacing SFP+ transceivers\n- Highest performance pre-terminated copper twin-axial cable\n- Low-latency, energy-efficient & low-cost transparent solution\n- 5-Year NETGEAR Limited Warranty Feature Feature Value Cable length 5 m Connector 1SFP+ Connector 2SFP+ Connector gender Male connector / Male connector Product colour Black Data transfer rate 10 Gbit/s ...

- 10 Gigabit Ethernet LRM long reach multimode" fiber connectivity (802.3aq standard)
- LC duplex connector
- Fits into the

...

Business Central\n\n Business Central is a secure, cloud based IT service platform designed to provide small to mid-sized organizations with an affordable way to establish, provision & manage key IT networking services. Effortlessly. As a Software-as-a-Service (Saa S) platform, Business Central provides enterprise-grade service levels with sophisticated client load balancing & redundancy to ensure maximum uptime while minimizing capital cost expenditures.\n\n One View. Multiple Possibilities\n\n Using a single portal dashboard, bring multiple sites, access points & users under one management umbrella within minutes. Manage wireless SSIDs, control applications being used on your network, & run bandwidth usage reports with a few clicks. Achieve full visibility of your network with real-time alerts to keep you in total control of evolving service needs from day one.\n\n Wireless management in tune to your IT budget\n\n Wireless Manager eliminates the need for onsite hardware based Wireless Controllers. The purchase, update, support renewal, & maintenance of a separate controller is not required. Reduce capital costs, achieve faster deployments & benefit from easy access to a range of configuration management & reporting tools. When needed, add extra capacity to suit
- whilst maintaining a fully balanced & capable network.\n\n Free time. Fee time\n\n Try Wireless Manager free for 90 days. Getting started with Wireless Manager is as easy as 1-2-3. Simply sign up to a new account today to get free access for 90 days, select your compatible Pro SAFE&174; Access Point (s) & upload cloud firmware (if required) & connect! There are no commitment or contracts to sign
- allowing you to try before you buy. For your users, offer free & / or chargeable access. For service oriented organizations, Wireless Manager is perfect for delivering value based free Internet access for an hour as an example, after which users can take advantage of premium based fee paying services.\n\n Flexibility\n\n Your network is unique. Allowing it to grow, flex & change to meet evolving needs is fully supported with Wireless Manager. Manage single APs at a handful of sites, hundreds at one location, or manage thousands of APs across multiple sites. Following your trial, ongoing service can be activated through purchase of one or more token licenses from an authorized NETGEAR reseller. They can assist in helping you select the most appropriate license to suit your duration needs & number of APs deployed.\n\n Establish\n\n- Cloud managed APs\n- Multiple SSIDs\n- Business Central Admin user accounts & privileges\n\n Provision\n\n- Firmware updates; manually or fully automated\n- Hotspots
- free or fee based\n- Guest Access\n- Usage plans & policies\n\n Establish Manage\n\n- Traffic Band
Width: Usage monitoring\n- Global Network Map View\n- Wi-fi Network Health\n- MAC ACLs for secure access\n- Licenses & renewals\n\n\n\n\n\n Product Model: Business Central Wireless Manager, 1 AP, 1 year\n\n\n



...