The HP NC360m is a HP Blade System c-Class network adapter providing two Gigabit Ethernet ports on a single mezzanine card. With the addition of the NC360m, HP Blade System c-Class customers now have the choice of an HP network adapter that uses either an Intel or Broadcom controller. The NC360m is designed for applications requiring additional Gigabit Ethernet ports than those provided on the server. It is ideal for virtualization, security, server consolidation, network segmentation & other Blade System applications requiring additional network port density.; Tested & proven to meet demanding Blade System standards, the adapter ships with the advanced server features that Pro Liant customers have come to expect, such as support for failover & load balancing, TCP/IP checksum offloading, large send offloading, Wake-on-LAN, PXE, jumbo frames, VLAN tagging & much more. Dual Port Gigabit Ethernet Throughput. The HP NC360m Dual Port 1 Gb E BL-c Adapter supports up to 2000 Mbps full duplex Ethernet transfer rate per port (4000 Mbps combined) delivers outstanding network performance that improves response time & removes bottlenecks across the entire network. The NC360m supports jumbo frames as a way to achieve higher throughput & better CPU utilization. Jumbo frames are particularly useful for database transfers & tape backups. Two ports on the NC360m are transmitted to separate enclosure interconnect bays providing redundant signal paths. ...

The HP NC364m is a HP Blade System c-Class network adapter providing four Gigabit Ethernet ports on a single card saving valuable server mezzanine slots for other purposes. The x 4 PCI Express NC364m is supported on Integrity & Pro Liant c-Class server blades in all mezzanine slots. For Integrity c-Class servers, it is the first network adapter mezzanine option available providing up to 16 Gigabit Ethernet ports per BL860c server, 128 ports per c 7000 enclosure. For Pro Liant, the NC364m is the second quad-port adapter option for c-Class allowing Pro Liant customers a choice between an adapter that uses either an Intel or Broadcom controller.; The NC364m is ideal for virtualization, security, server consolidation, network segmentation, & other server applications requiring maximum throughput & port density. The total aggregate throughput of 4 Gbps also meets the needs for customers desiring high bandwidth but are not yet ready to move to 10 Gigabit Ethernet. Ethernet Throughput. The HP NC364m Quad Port 1 Gb E BL-c Adapter has up to 2000 Mbps full duplex Ethernet transfer rate per port (8000 Mbps combined) delivering better network performance & enhanced response time by removing bottlenecks across the entire network. The NC364m support for 9K jumbo frames (also known as extended frames) permit a 9K byte transmission unit (MTU), which is six times the size of standard 1500 byte Ethernet frame. Supporting jumbo frames is a way to achieve higher throughput & better CPU utilization. IEEE 802.1Q virtual local area network (VLAN) protocol allows each physical port of the NC364m to be separated into multiple virtual NICs for added network segmentation & enhanced security & performance. ...

The HP NC365T 4-port Ethernet Server Adapter is a four lane (x 4) PCI Express (PCIe) high performing single-chip, low-power quad port adapter that offers the highest port density among all Pro Liant Networking Options. The NC365T is PCIe Gen 2.0 compliant adapter that supports TCP checksum & segmentation, Large Send & Receive offload capability, Message Signal Interrupt Extension (MSI-X), IEEE 1588, Receive Side Scaling (RSS), VLAN tagging, 9.5KB jumbo frames & IPv 6. The NC365T ships with support for an advanced server virtualization feature called Virtual Machine Data queue (VMDq), which improves I/O performance by reducing I/O overhead in a virtualized environment. Like all Pro Liant Networking Options, NC365T can be easily installed in either standard or low profile slots. ...

Overview The HP NC551m Flex Fabric 10 Gb Converged Network Adapter (NC551m Flex Fabric Adapter) delivers the performance benefits & cost savings of converged network connectivity for HP Blade System servers. The dual-port NC551m optimizes network & storage traffic with hardware acceleration & offloads for stateless TCP/IP, TCP Offload Engine (TOE), Fibre Channel over Ethernet (FCo E) & i SCSI. Features ? Full 10 Gb band
Width: Delivers outstanding network performance that improves response time & removes I/O bottlenecks.
...

Overview The HP 22-in-1 Media Card Reader provides a front-panel device that accepts a variety of flash memory cards. It also provides a single USB (Universal Serial Bus) port. Features The Workstations kit

Includes:: the reader device (which connects to a two-channel USB (Universal Serial Bus) header on the system motherboard) & an optical bay adapter designed for the HP Zx 00 Workstations series.

...

Overview The NVIDIA Quadro 1000M graphics board (N12P-Q1 / P1076) is an MXM™ version 3.0 Type A (82 mm by 70 mm) form factor graphics add-in card based on the Quadro graphics processing unit (GPU). This graphics board is targeted for entry to midrange professional 3D workstation graphics applications. Features • Supported on HP Z1 workstations ...

The NVIDIA Quadro 410 graphics board is a PCI Express 2 low profile form factor accelerated 3D graphics add-in card based on the latest GPU architecture from NVIDIA. The Quadro 410 graphics board is targeted for entry level professional CAD, M&E-video, & Scientific Visualization applications The Quadro 410 graphics board offers 512 MB of DDR3 memory & supports up to two displays. Different display adaptors may be necessary depending on the type of display that will be connected. ...

Overview The NVIDIA Quadro 410 graphics board is a PCI Express 2 low profile form factor accelerated 3D graphics add-in card based on the latest GPU architecture from NVIDIA. The Quadro 410 graphics board is targeted for entry level professional CAD, M&E-video, & Scientific Visualization applications Features • The Quadro 410 graphics board offers 512 MB of DDR3 memory & supports up to two displays. Different display adaptors may be necessary depending on the type of display that will be connected. ...

Overview The NVIDIA Quadro 500M graphics board (N12M-Q3 / P1077) is a graphics processing unit (GPU) module designed using the MXM™ version 3.0 Type A

Specification. This graphics board is targeted for entry level professional 3D workstation graphics applications. Features • Supported on HP Z1 workstations

...

The NVIDIA Quadro K2000 graphics board is a single-slot PCI Express add-in card based on the new NVIDIA Kepler architecture graphics processing unit (GPU). The Quadro K2000 graphics board is an excellent choice for medium complexity designs & models in professional CAD, M&E & visualization applications. Features
- Comprehensive ISV certifications for professional environments
- Ultra-efficient 51W maximum power provides industry leading performance/watt results
- 2 GB of blazing GDDR5 memory


...