Overview HP A5800 switches offer an unmatched combination of Gigabit & 10-Gigabit Ethernet port density, high-availability architecture, & full Layer 2 & Layer 3 dual-stack IPv 4 & IPv 6 capabilities. Besides wire-speed line-rate performance on all ports, the switches include patented Intelligent Resilient Framework (IRF) technology & Rapid Ring Protection Protocol (RRPP) that allow local or geographically distributed A5800 switches to be interconnected for higher resiliency & performance. Available in Po E & non-Po E models & 1 RU & 2 RU flex chassis configurations, A5800 switches are built on open standards & include an open application architecture (OAA) module slot that that enables flexible deployment options for new services. These versatile switches are ideal to be used in the network core for a building or department, or as a high-performance switch in the convergence layer or network edge of enterprise campus networks. Features Quality of Service (Qo S) • Powerful Qo S feature: creates traffic classes based on access control lists (ACLs), IEEE 802.1p precedence, IP, DSCP or Type of Service (To S) precedence; supports filter, redirect, mirror, or remark; supports the following congestion actions: strict priority (SP) queuing, weighted round robin (WRR), weighted fair queuing (WFQ), weighted random early discard (WRED), weighted deficit round robin (WDRR), & SP+WDRR Management • Remote configuration & management: is available through a secure Web browser or a comm&-line interface (CLI) Connectivity • High-density port connectivity: supports up to 84 1-Gigabit ports per unit/612 per stack Performance • Hardware-based wire-speed access control lists (ACLs): feature-rich ACL implementation (TCAM based) helps ensure high levels of security & ease of administration without impacting network performance Manageability • Full-featured console: provides complete control of the switch with a familiar comm&-line interface (CLI) Layer 2 switching • GARP VLAN Registration Protocol (GVRP): allows automatic learning & dynamic assignment of VLANs Layer 3 services • Address Resolution Protocol (ARP): determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2 network ...

The HP MSR30 router series is a component of the HP Flex Branch solution, which is part of the HP Flex Network architecture. MSR30 series routers are ideal for medium to large enterprise branch & regional offices. They provide unmatched performance, integrated routing, switching, security, wireless, & voice services with a rich set of modular WAN/LAN connectivity options in a single device to reduce operating & capital costs & simplify complexity. HP MSR30 series routers are purpose-built routing platforms that deliver embedded applications, enhanced security, & performance acceleration, as well as support a wide range of flexible LAN, WAN, & voice interface options to enable remote users in branch locations to securely & reliably access enterprise applications & corporate resources. Quality of Service (Qo S)
- Traffic policing: supports Committed Access Rate (CAR) & line rate;
- Congestion management: supports FIFO, PQ, CQ, WFQ, CBQ, & RTPQ;
- Congestion avoidance: Weighted Random Early Detection (WRED)/ Random Early Detection (RED);
- Other Qo S technologies: support traffic shaping, FR Qo S, MPLS Qo S, & MP Qo S/LFI. Management
- Management interface control: provides management access through modem port & terminal interface; provides access through terminal interface, telnet, or SSH;
- Industry-standard CLI with a hierarchical structure: reduces training time & expenses, & increases productivity in multivendor installations;
- Management security: multiple privilege levels with password protection restrict access to critical configuration commands; ACLs provide telnet & SNMP access; local & remote syslog capabilities allow logging of all access;
- SNMPv 1, v 2, & v 3: provide complete support of SNMP; provide full support of industry-standard Management Information Base (MIB) plus private extensions; SNMPv 3 supports increased security using encryption;
- Remote monitoring (RMON): uses standard SNMP to monitor essential network functions; supports events, alarm, history, & statistics group plus a private alarm extension group. Connectivity
- High-density port connectivity: provides up to 10 interface module slots & up to 90 Fast Ethernet ports;
- Multiple WAN interfaces: provide a traditional link with E3, T3, E1, T1, ADSL, ADSL2, ADSL2+, G.SHDSL, ATM, OC-3, POS, Serial, & ISDN/AM backup; provide high-density Ethernet access with WAN Fast Ethernet/ Gigabit Ethernet, LAN 4-/9-/16-/24-port Fast Ethernet, & Po E; provide mobility access with 802.11b/g/n Wi-Fi & 3G;
- Ideal IP telephony solutions: support FXO, FXS, T1, E1, & BRI in various densities; support SIP voice communications to VCX; provide Web browser-based administration, Smart Dial Routing, FXS & FXO 1:1 binding for all ports, Power to Escape to PSTN when IP failures occur, & Enhanced Local MSR Survivability;
- Flexible port selection: provides a combination of fiber & copper interface modules, 100/1000BASE-X auto-speed selection, & 10/100/1000BASE-T auto-speed detection plus auto duplex & MDI/MDI-X;
- Packet storm protection: protects against broadcast, multicast, or unicast storms with user-defined thresholds. Performance
- Excellent forwarding performance: provides forwarding performance from 220 Kpps to 360 Kpps; meets current & future bandwidth-intensive application demands of enterprise businesses;
- Powerful encryption capacity:

Includes:: embedded hardware encryption accelerator to improve encryption performance;
- Flexible chassis selection: offers a choice of more than five routers, meeting different requirements on enterprise branches. Resiliency & high availability
- Backup Center: acts as a part of the management & backup function to provide backup for device interfaces; delivers reliability by switching traffic over to a backup interface when the primary one fails;
- External redundant power supply: provides high reliability;
- Virtual Router Redundancy Protocol (VRRP): allows groups of two routers to dynamically back each other up to create highly available routed environments; supports VRRP load balancing.





















...

4GB (1x 4GB configuration) of DDR3-1600 ECC Unbuffered DIMMs. Boost the capabilities of your HP Workstation & keep it performing reliably with HP memory. Upgrading your memory is a cost-effective way to improve system performance when insufficient memory & hard drive paging is slowing your applications down. ...

4GB (1x 4GB configuration) of DDR3-1600 ECC Registered DIMMs. Boost the capabilities of your HP Workstation & keep it performing reliably with HP memory. Upgrading your memory is a cost-effective way to improve system performance when insufficient memory & hard drive paging is slowing your applications down. ...

8GB (1x 8GB configuration) of DDR3-1600 ECC Registered DIMMs. Boost the capabilities of your HP Workstation & keep it performing reliably with HP memory. Upgrading your memory is a cost-effective way to improve system performance when insufficient memory & hard drive paging is slowing your applications down. ...

Ideal for customers who value instant-dry, water- & smudge-resistant photos with true-to-life colour.[1]\n Print true-to-life ...

Ideal for customers who value instant-dry, water- & smudge-resistant photos with true-to-life colour.[1]\n Print true-to-life ...

The HP PCIe 4 Gb FC Host Bus Adapters (HBAs) support customers using HP Pro Liant servers with PCIe I/O slots running a broad range of operating systems. These Fibre Channel HBAs are second generation products that support this new higher speed I/O bus architecture & provide customers the ability to use it to connect to their HP storage arrays. What's New HP provides FC HBAs from the leading manufacturers in the industry offering HP customers maximum choice. Industry Leading PCI-Express Based Solutions for Fibre Channel
- 4 Gb PCI-Express single & dual channel I/O connectivity for HP storage arrays supported with a broad range of operating systems.
- 4 Gb Fibre Channel increases aggregate throughput rate to 800 MBps per channel in full-duplex mode.
- PCI-Express host bus interface for high throughput applications. Include full fabric support with automatic topology & speed adaptation.
- Minimum of 150, 000 IOPS deliver high I/O transfer rates for storage applications
- All HP 4 Gb PCI-Express FC HBAs offer centralized management capabilities as well as remote control of distributed HBAs




...

The HP 4 Gb PCI-Express Fibre Channel Host Bus Adapters (HBAs) support customers using HP Pro Liant servers with PCIe I/O slots running a broad range of operating systems. These Fibre Channel HBAs are second generation products that support this new higher speed I/O bus architecture & provide customers the ability to use it to connect to their HP arrays. ...

HP Tower Uninterruptible Power Systems (UPS) provide advanced power protection & secure your computer equipment & your critical data against damage due to inconsistent & fluctuating power. Designed for small/medium businesses, HP UPSs lower your power protection costs by allowing you to safeguard all of your equipment. Key benefits include increased power rating, an intuitive front panel display, Enhanced Battery Management (EBM), prioritized shut-down, hot-swappable battery, Network Transient Protection, & a serial & USB (Universal Serial Bus) ports for data exchange with the host computer. The HP Power Manager software (comes with all HP UPSs) provides the flexibility to monitor power conditions & control the HP UPS locally or remotely. It enables you to broadcast alarms, perform orderly shutdowns in the event of power failures, & means that you can schedule power-on & power-off to the UPS & attached equipment. ...