\n\n\n \n Hewlett Packard Enterprise MSA 8 Gb Short Wave Fibre Channel SFP+ 4-pack network transceiver module Fiber optic 8000 Mbit/s SFP+ 850 nm\n \n \n \n \n \n \n Manufacturer:\n Hewlett Packard Enterprise\n \n \n Category:\n Networking\n \n \n Sub-Category:\n Network Transceiver Modules\n \n \n SKU:\n C8R23B\n \n \n EAN:\n 4549821122479 0190017186351 4058154228258\n \n \n \n \n \n Description\n \n \n

Includes:: four x 8 Gb SW FC SFPs\n \n \n \n Specifications\n \n Networking SFP transceiver type Fiber optic Fiber optic connector LCMaximum data transfer rate 8000 Mbit/s Interface type SFP+ Technical details Wavelength 850 nm Fiber cable diameters supported (core/cladding)50/125, 62.5/125 &181;m Compatible products MSA 2050 Storage, MSA 2052 Storage Performance Compatible products MSA 2050 Storage, MSA 2052 Storage SFP transceiver type Fiber optic Fiber optic connector LCWavelength 850 nm Fiber cable diameters supported (core/cladding)50/125, 62.5/125 &181;m Maximum data transfer rate 8000 Mbit/s Interface type SFP+ Multi-mode fiber (MMF) supported Yes SFP transceiver standard SWFeatures Compatible products MSA 2050 Storage, MSA 2052 Storage Weight & dimensions Width 13.4 mm Depth 56.5 mm Height 8.5 mm Packaging data Number of products included 4 pc (s) Packaging content Number of products included 4 pc (s)\n \n \n\n \n\n\n\n\n\n

...

\n Hewlett Packard Enterprise MSA 8TB 12G SAS 7.2K LFF (3.5in) 512e Midline 1yr 3.5" 8000 GB\n \n \n \n \n \n \n Manufacturer:\n Hewlett Packard Enterprise\n \n \n Category:\n Data Storage\n \n \n Sub-Category:\n Internal Hard Drives\n \n \n SKU:\n M0S90A\n \n \n EAN:\n 0889296456995 4514953882171 5054629923634\n \n \n \n \n\n Description\n \n \n HP Serial Attached SCSI (SAS) hard drives are high-performance alternatives to SATA hard drives. SAS hard drives combine high-bandwidth & faster data transfer rates with better error detection & recovery, as well as having higher reliability specifications.\n\n\n\n HP SAS hard drives deliver high performance solutions for hosting high transaction based applications. Available in HP hot plug carriers or non-hot plug. The HP SAS hard drives come in both 2.5in (SFF) & 3.5in (LFF) industry standard form factors & are available in a variety of capacity points to meet a wide range of requirements. The SAS interface was designed & engineered for high availability, enterprise-class data storage where performance, reliability & data integrity are crucial.\n \n \n\n Specifications\n \n Software Windows operating systems supported Yes Linux operating systems supported Yes Hard drive Component for Server/workstation HDD interface transfer rate 12 Gbit/s HDD speed 7200 RPMHDD size 3.5"HDD capacity 8000 GBCompatible products HP MSA 1040, 2040 Features Type HDDComponent for Server/workstation HDD interface transfer rate 12 Gbit/s Interface SASWindows operating systems supported Yes Linux operating systems supported Yes HDD speed 7200 RPMHDD size 3.5"HDD capacity 8000 GBCompatible products HP MSA 1040, 2040 Power Operating voltage 5 / 12 VSystem requirements Windows operating systems supported Yes Linux operating systems supported Yes Technical details Operating voltage 5 / 12 VQuantity 1 Interface SASSpecial features 512e Packaging data Quantity 1 Packaging content Quantity 1 Other features Operating voltage 5 / 12 VInterface SASSpecial features 512e\n \n \n\n\n\n\n\n ...

\n Hewlett Packard Enterprise MSA 900GB 12G SAS 15K SFF (2.5in) Enterprise 3yr Warranty 2.5"\n \n \n \n \n \n \n Manufacturer:\n Hewlett Packard Enterprise\n \n \n Category:\n Data Storage\n \n \n Sub-Category:\n Internal Hard Drives\n \n \n SKU:\n Q1H47A\n \n \n EAN:\n 5711783976387 0190017139562 4549821072620\n \n \n \n \n\n Description\n \n \n Serial Attached SCSI (SAS) provides a superior storage solution. With some storage requirements escalating & others becoming more complex, factors such as flexibility, performance, increased reliability, greater density, security, scalability & accessibility are more critical than ever. Today's organizations consist of different kinds of environments. Enterprise data centers must be online almost 24X7, fulfill requests from numerous users simultaneously, & allow for constant growth & expansion while in operation. Other customer environments require high capacity storage & high data availability for low I/O environments. HP's portfolio of SAS drives meets all these demands.\n \n \n\n Specifications\n \n Hard drive Component for Disk array HDD interface transfer rate 12 Gbit/s HDD speed 15000 RPMHDD size 2.5"HDD capacity 900 GBCompatible products MSA 2050 Storage Features Type HDDComponent for Disk array HDD interface transfer rate 12 Gbit/s Interface SASHDD speed 15000 RPMHDD size 2.5"HDD capacity 900 GBCompatible products MSA 2050 Storage Power Operating voltage 5 VTechnical details Operating voltage 5 VInterface SASPackaging data Storage drive adapter included No Packaging content Storage drive adapter included No Other features Operating voltage 5 VInterface SAS\n \n \n\n\n\n\n\n ...

\n Hewlett Packard Enterprise N9X95A internal solid state drive 2.5" 400 GB SAS\n \n \n \n \n \n \n Manufacturer:\n Hewlett Packard Enterprise\n \n \n Category:\n Data Storage\n \n \n Sub-Category:\n Internal Solid State Drives\n \n \n SKU:\n N9X95A\n \n \n EAN:\n 4514953970601 0190017004488 5057454826989\n \n \n \n \n\n Description\n \n \n HPE MSA 400GB 12G SAS Mixed Use SFF (2.5in) 3yr Warranty Solid State Drive\n \n \n\n Specifications\n \n Hard drive SSD capacity 400 GBInternal Yes Data transmission Data transfer rate 12 Gbit/s Design Internal Yes Component for Server/workstation Product colour Aluminium, Black SSD form factor 2.5" Performance Interface SASComponent for Server/workstation SSD capacity 400 GBData transfer rate 12 Gbit/s Features Interface SASComponent for Server/workstation SSD capacity 400 GBData transfer rate 12 Gbit/s SSD form factor 2.5" Technical details Interface SASProduct colour Aluminium, Black SSD form factor 2.5" Other features Product colour Aluminium, Black Internal Yes\n \n \n\n\n\n\n\n ...

\n Hewlett Packard Enterprise Office Connect 1405 5G v 3 Unmanaged Gigabit Ethernet (10/100/1000) Grey\n \n \n \n \n \n \n Manufacturer:\n Hewlett Packard Enterprise\n \n \n Category:\n Networking\n \n \n Sub-Category:\n Network Switches\n \n \n SKU:\n JH407AACC\n \n \n EAN:\n 0190017030920\n \n \n \n \n \n Description\n \n \n The HPE Office Connect 1405 Switch Series is a plug-&-play unmanaged fixed-port Layer 2 switch designed for small offices. These switches are preconfigured with connections using low-cost Ethernet copper cabling. They are Class B certified, energy efficient & quiet. They support administration-friendly features such as auto-negotiation. Designed for high reliability, long life, & low power consumption, they are ideal for businesses concerned with total cost of ownership.\n\n\n\n What's new\n\n- New entry level 5G- & 8G- port switches for small offices.\n\n- Plug & play, no configuration required.\n\n- Quality of Service (Qo S) & flow control for enhanced network efficiency.\n\n- Energy Efficient Ethernet for low power consumption.\n\n- 3 year warranty with 24X7 phone support for 90 days.\n\n\n\n Features\n\n\n\n Ease of Use\n\n- The HPE Office Connect 1405 Switch Series offers unmanaged plug-&-play simplicity.\n\n- A comprehensive LED display with per-port indicators provides an at-a-glance view of status, activity, speed, & full duplex operation.\n\n- Flow control helps to provide reliable communications during full-duplex operation.\n\n- Connectivity & Performance\n\n- The HPE Office Connect 1405 Switch Series with Auto-MDIX automatically adjusts to straight-through or crossover cables on all 10/100 & 10/100/1000 ports.\n\n- Jumbo packet support for Gigabit Ethernet ports only offers up to 9216-byte frame size to improve performance of larger data transfers.\n\n\n\n Half/ Full duplex auto-negotiating capability on every port doubles the throughput of every port.\n\n\n\n Quality of Service (Qo S)\n\n- The HPE Office Connect 1405 Switch Series has IEEE 802.1p prioritization delivering data to devices based on priority & type of traffic.\n\n- The switches support energy efficient Ethernet.\n\n- Fanless design: enables quiet operation for deployment in open spaces (selected models).\n\n- Green initiative support: provides support for Ro HS & WEEE regulations.\n\n- Energy savings: utilizes Energy Efficient Ethernet (EEE) standard (IEEE 802.3az) & idle-port powerdown for energy savings (v 2 only).\n \n \n \n Specifications\n \n Ports & interfaces Copper ethernet cabling technology 10BASE-T, 100BASE-TX, 1000BASE-TBasic switching RJ-45 Ethernet ports quantity 5 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000) Performance Packet buffer memory 1 MBStackable No Technical details Product colour Grey Stackable No Rack mounting No Management features Switch type Unmanaged Quality of Service (Qo S) support Yes Network Auto-sensing Yes Copper ethernet cabling technology 10BASE-T, 100BASE-TX, 1000BASE-TNetworking standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3u Full duplex Yes Flow control support Yes Auto MDI/MDI-XYes 10G support No Data transmission Throughput 7.4 Mpps Latency (10-100 Mbps)3 &181;s Latency (1 Gbps)2.6 &181;s Packet buffer memory 1 MBMAC address table 2048 entries Switching capacity 10 Gbit/s Jumbo frames support Yes Memory Packet buffer memory 1 MBDesign Product colour Grey Stackable No Rack mounting No Power AC input voltage 100
- 240 VAC input frequency 50
- 60 Hz Power consumption (typical)3 WPower over Ethernet (Po E) Power over Ethernet (Po E) No Operational conditions Storage temperature (T-T)-40
- 70 &176;CStorage relative humidity (H-H)15
- 95% Operating temperature (T-T)0
- 40 &176;COperating relative humidity (H-H)15
- 95% Weight & dimensions Width 114.3 mm Depth 91.4 mm Height 35.6 mm Weight 180 g\n \n





...

\n Hewlett Packard Enterprise Office Connect 1405 5G v 3 Unmanaged L2 Gigabit Ethernet (10/100/1000) Grey\n \n \n \n \n \n \n Manufacturer:\n Hewlett Packard Enterprise\n \n \n Category:\n Networking\n \n \n Sub-Category:\n Network Switches\n \n \n SKU:\n JH407A\n \n \n EAN:\n 0190017030920 0190017030937 0190017030821 0190017030869\n \n \n \n \n\n Description\n \n \n The HPE Office Connect 1405 Switch Series is a plug-&-play unmanaged fixed-port Layer 2 switch designed for small offices. These switches are preconfigured with connections using low-cost Ethernet copper cabling. They are Class B certified, energy efficient & quiet. They support administration-friendly features such as auto-negotiation. Designed for high reliability, long life, & low power consumption, they are ideal for businesses concerned with total cost of ownership.\n\n\n\n What's new\n\n- New entry level 5G- & 8G- port switches for small offices.\n\n- Plug & play, no configuration required.\n\n- Quality of Service (Qo S) & flow control for enhanced network efficiency.\n\n- Energy Efficient Ethernet for low power consumption.\n\n- 3 year warranty with 24X7 phone support for 90 days.\n\n\n\n Features\n\n\n\n Ease of Use\n\n- The HPE Office Connect 1405 Switch Series offers unmanaged plug-&-play simplicity.\n\n- A comprehensive LED display with per-port indicators provides an at-a-glance view of status, activity, speed, & full duplex operation.\n\n- Flow control helps to provide reliable communications during full-duplex operation.\n\n- Connectivity & Performance\n\n- The HPE Office Connect 1405 Switch Series with Auto-MDIX automatically adjusts to straight-through or crossover cables on all 10/100 & 10/100/1000 ports.\n\n- Jumbo packet support for Gigabit Ethernet ports only offers up to 9216-byte frame size to improve performance of larger data transfers.\n\n\n\n Half/ Full duplex auto-negotiating capability on every port doubles the throughput of every port.\n\n\n\n Quality of Service (Qo S)\n\n- The HPE Office Connect 1405 Switch Series has IEEE 802.1p prioritization delivering data to devices based on priority & type of traffic.\n\n- The switches support energy efficient Ethernet.\n\n- Fanless design: enables quiet operation for deployment in open spaces (selected models).\n\n- Green initiative support: provides support for Ro HS & WEEE regulations.\n\n- Energy savings: utilizes Energy Efficient Ethernet (EEE) standard (IEEE 802.3az) & idle-port powerdown for energy savings (v 2 only).\n \n \n\n Specifications\n \n Ports & interfaces Copper ethernet cabling technology 10BASE-T, 100BASE-TX, 1000BASE-TBasic switching RJ-45 Ethernet ports quantity 5 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000) Performance Packet buffer memory 1 MBStackable No Technical details Product colour Grey Stackable No Rack mounting No Management features Switch type Unmanaged Quality of Service (Qo S) support Yes Switch layer L2 Networking Auto-sensing Yes Copper ethernet cabling technology 10BASE-T, 100BASE-TX, 1000BASE-TNetworking standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3u Full duplex Yes Flow control support Yes Auto MDI/MDI-XYes 10G support No Data transmission Throughput 7.4 Mpps Latency (10-100 Mbps)3 &181;s Latency (1 Gbps)2.6 &181;s Packet buffer memory 1 MBMAC address table 2048 entries Switching capacity 10 Gbit/s Jumbo frames support Yes Memory Packet buffer memory 1 MBDesign Product colour Grey Stackable No Rack mounting No Power AC input voltage 100
- 240 VAC input frequency 50
- 60 Hz Power consumption (typical)3 WPower over Ethernet (Po E) Power over Ethernet (Po E) No Operational conditions Storage temperature (T-T)-40
- 70 &176;CStorage relative humidity (H-H)15
- 95% Operating temperature (T-T)0
- 40 &176;COperating relative humidity (H-H)15
- 95% Weight & dimensions Width 114.3 mm Depth 91.4 mm Height 35.6 mm Weight 180 g\n \n \n\n\n\n\n\n





...

\n Hewlett Packard Enterprise Office Connect 1420 24G 2SFP+ Unmanaged L2 Gigabit Ethernet (10/100/1000) 1U Grey\n \n \n \n \n \n \n Manufacturer:\n Hewlett Packard Enterprise\n \n \n Category:\n Networking\n \n \n Sub-Category:\n Network Switches\n \n \n SKU:\n JH018AACC\n \n \n EAN:\n 0888793058374\n \n \n \n \n \n Description\n \n \n The HPE Office Connect 1420 Switch Series delivers cost effective gigabit Ethernet (1 Gb E) connectivity offering small businesses 10 times the performance of Fast Ethernet with unmanaged plug-&-play simplicity. The series

Includes:: nine models, all with gigabit performance & a choice of key features including Po E+ for powering IP devices, Fiber & 10G uplinks for connectivity to servers & storage.\n\n All models support silent fanless operation, automated features for hands off operation & low power consumption.\n\n Features\n\n Cost-effective, High-performance Gb E Layer 2 Switching\n- The HPE Office Connect 1420 Switch Series features gigabit Ethernet (1 Gb E) connectivity offering small businesses 10 times the performance of Fast Ethernet with unmanaged plug-&-play simplicity.\n- Unmanaged switches offer a cost-effective small business solution for locations needing only basic Layer 2 switching in a flat single tier network.\n- Half-/full-duplex auto-negotiating capability on every port doubles the throughput of every port.\n\n Flexible Choices To Meet Most Basic Layer 2 Networking Design Needs\n- The HPE Office Connect 1420 Switch Series

Includes:: nine models, all with gigabit performance & a choice of key features including Po E+, Fiber & 10G uplink options.\n- The 1420-24G-2SFP model with SFP uplinks is ideal where gigabit fiber is required, while the 1420-24G-2SFP+ 10G Uplink model with SFP+ uplinks is available where 10 Gb E is needed.\n- Power over Ethernet (Po E+) models deliver greater efficiency for powering IP phones, wireless access points, or video surveillance cameras without the cost of additional cabling.\n- All HPE Office Connect 1420 Switch Series models are fanless for silent operation in office settings & include internal power supplies.\n- Units can be deployed for desktop operation or can be rack mounted.\n\n Automated Features for Hands-off Operation\n- All HPE Office Connect 1420 Switch Series models are plug-&-play with zero configuration & no required ongoing administration.\n- This unmanaged Po E+ model delivers fully automated support for powering compatible IP phones, video surveillance cameras or wireless access points.\n- The HPE 1420-24G-2SFP+ 10G Uplink Switch requires no configuration beyond installation of optional 10 Gb E transceivers to achieve 10 Gb E speeds. Alternatively, use today with gigabit SFP transceivers if higher performance is merely a future requirement.\n- IEEE 802.1p prioritization & other Qo S features automate the preferred handling of high priority traffic, including Differentiated Services Code Point (DSCP) set priorities.\n- The Office Connect 1420 Switch Series supports jumbo packets to improve the performance of large data transfers.\n\n Cost-effective Ownership for Now & into the Future\n- The HPE Office Connect 1420 Switch Series offers a cost-effective upgrade path to next-generation 10 Gb E networks to reduce performance bottlenecks\n- The switch series

Includes:: Po E+ options to power IP devices without the cost of additional cabling for power.\n- Green features include energy-efficient Ethernet IEEE 802.3az, auto-power down mode on idle ports, & power savings on short distance cables for low power consumption.\n- This series comes with a Limited Lifetime Warranty providing next business day advance hardware replacement shipment in most countries, 24x 7 phone support available for the first 90 days, & electronic & business hours phone support for the entire warranty period.\n \n \n \n Specifications\n \n Performance Packet buffer memory 1.5 MBStackable Yes Flash memory 8 MBTechnical details Form factor 1UProduct colour Grey Stackable Yes Rack mounting Yes Management features Switch type Unmanaged Quality of Service (Qo S) support Yes Switch layer L2 Ports & interfaces SFP+ module slots quantity 2 Basic switching RJ-45 Ethernet ports quantity 24 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000) Network Networking standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3u Full duplex Yes Flow control support Yes Auto MDI/MDI-XYes 10G support Yes Data transmission Throughput 65.5 Mpps Latency (10-100 Mbps)8 &181;s Latency (1 Gbps)16 &181;s Latency (10 Gbps)2 &181;s Packet buffer memory 1.5 MBMAC address table 16384 entries Switching capacity 88 Gbit/s Memory Packet buffer memory 1.5 MBFlash memory 8 MBDesign Form factor 1UProduct colour Grey Stackable Yes Rack mounting Yes Power Power supply included Yes AC input voltage 100
- 240 VAC input frequency 50
- 60 Hz Power consumption (typical)21 WPower over Ethernet (Po E) Power over Ethernet (Po E) No Operational conditions Storage temperature (T-T)-40
- 70 &176;CStorage relative humidity (H-H)5
- 95% Operating temperature (T-T)0
- 40 &176;COperating relative humidity (H-H)5
- 95% Weight & dimensions Width 440 mm Depth 238 mm Height 44 mm Weight 2.9 kg\n \n











...

\n\n\n \n Hewlett Packard Enterprise Office Connect 1420 5G Po E+ (32W) Unmanaged L2 Gigabit Ethernet (10/100/1000) Grey 1U Power over Ethernet (Po E)\n \n \n \n \n \n \n Manufacturer:\n Hewlett Packard Enterprise\n \n \n Category:\n Networking\n \n \n Sub-Category:\n Network Switches\n \n \n SKU:\n JH328AACC\n \n \n EAN:\n \n \n \n \n \n \n Description\n \n \n The HPE 1420 Switch Series consists of unmanaged Gigabit Ethernet switches for small businesses & others looking for plug-&-play basic Layer 2 connectivity for their network, including low-cost Po E+ & 10 Gb E uplink models. The HPE 1420 Switch Series has four models: 16-port 10/100/1000, 24-port 10/100/1000 with two SFP Gigabit ports, 24-port 10/100/1000 ports of which 12 are Po E+ enabled (124 W Po E budget), & 24-port 10/100/1000 with two SFP+ 10 Gb E ports.\n\n\n\n Features\n\n\n\n High-performance Gb E Layer 2 Switching, Cost-effective & Easy to Deploy\n\n- The HPE 1420 Switch Series offers small businesses & others Layer 2 Gigabit Ethernet switching with unmanaged affordability & plug-&-play simplicity.\n\n- Gigabit Ethernet is the most recommended & deployed networking technology today, delivering 10 times more performance than Fast Ethernet.\n\n- Unmanaged switches are the most economical offerings, ideal for locations needing only basic Layer 2 switching in a flat single tier network.\n\n\n\n Model Choices to Meet Most Design Needs for Basic Layer 2 Networking\n\n- The HPE 1420 Switch Series has four models to choose from, all with Gigabit performance but offering different uplink options. Consider the 16-port model for locations needing fewer connections & one of the 24-port models where more connectivity is required.\n\n- The 1420-24G-2SFP model with SFP uplinks is ideal where Gigabit fiber is required, while the 1420-24G-2SFP+ 10G Uplink model with SFP+ uplinks is available where 10 Gb E is needed now or in the future.\n\n- Anticipate the installation of IP voice, wireless Access points, or video surveillance cameras by deploying Power over Ethernet (Po E). Choose the Po E+ model for highly cost-effective Po E deployments.\n\n- All 1420 Switch Series models are fanless for silent operation, usable in office settings around workers. Units have internal power supplies with power-cord plug-in simplicity.\n\n- Units can be deployed for desktop operation or can be rack mounted.\n\n\n\n Automated Features for Hands-off Operation\n\n- All HPE 1420 Switch Series models are plug-&-play with zero configuration & no required ongoing administration.\n\n- The switch series has the company's only unmanaged Po E model, with fully automated support for powering compatible IP phones, video surveillance cameras or wireless Access Points.\n\n- The HPE 1420-24G-2SFP+ 10G Uplink Switch requires no configuration beyond installation of optional 10 Gb E transceivers to achieve 10 Gb E speeds. Alternatively, use today with Gigabit SFP transceivers if higher performance is merely a future requirement.\n\n- IEEE 802.1p prioritization & other Qo S features automate the preferred handling of high priority traffic, including Differentiated Services Code Point (DSCP) set priorities.\n\n- The 1420 Switch Series supports Jumbo packets to improve the performance of large data transfers.\n\n\n\n Cost-effective Ownership for Now & into the Future\n\n- The HPE 1420 Switch Series offers a cost-effective upgrade path to next-generation 10 Gb E networks to reduce performance bottlenecks when connecting to storage & servers.\n\n- The switch series

Includes:: Po E+ options to power IP devices without the cost of additional cabling for power.\n\n- Green features include energy-efficient Ethernet IEEE 802.3az, auto-power down mode on idle ports, & power savings on short distance cables for low power consumption.\n\n- Limited Lifetime Warranty.\n \n \n \n Specifications\n \n Ports & interfaces Copper ethernet cabling technology 10BASE-T, 100BASE-TX, 1000BASE-TBasic switching RJ-45 Ethernet ports quantity 5 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000) Performance Packet buffer memory 1 MBStackable Yes Technical details Form factor 1UProduct colour Grey Stackable Yes Rack mounting Yes Management features Switch type Unmanaged Quality of Service (Qo S) support Yes Switch layer L2 Networking Auto-sensing Yes Copper ethernet cabling technology 10BASE-T, 100BASE-TX, 1000BASE-TNetworking standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3u Full duplex Yes Flow control support Yes Auto MDI/MDI-XYes 10G support No Data transmission Throughput 7.4 Mpps Latency (10-100 Mbps)3 &181;s Latency (1 Gbps)2.6 &181;s Packet buffer memory 1 MBMAC address table 2048 entries Switching capacity 10 Gbit/s Jumbo frames support Yes Memory Packet buffer memory 1 MBDesign Form factor 1UProduct colour Grey Stackable Yes Rack mounting Yes Power AC input voltage 100
- 240 VAC input frequency 50
- 60 Hz Power consumption (typical)40 WPower over Ethernet (Po E) Total Power over Ethernet (Po E) budget 32 WPower over Ethernet (Po E) Yes Operational conditions Storage temperature (T-T)-40
- 70 &176;CStorage relative humidity (H-H)15
- 95% Operating temperature (T-T)0
- 40 &176;COperating relative humidity (H-H)15
- 95% Weight & dimensions Width 157.7 mm Depth 104.9 mm Height 26.9 mm Weight 500 g\n \n \n\n \n\n\n\n\n\n







...

\n\n\n \n Hewlett Packard Enterprise Office Connect 1420 5G Po E+ (32W) Unmanaged L2 Gigabit Ethernet (10/100/1000) Grey 1U Power over Ethernet (Po E)\n \n \n \n \n \n \n Manufacturer:\n Hewlett Packard Enterprise\n \n \n Category:\n Networking\n \n \n Sub-Category:\n Network Switches\n \n \n SKU:\n JH328AACC\n \n \n EAN:\n \n \n \n \n \n \n Description\n \n \n The HPE 1420 Switch Series consists of unmanaged Gigabit Ethernet switches for small businesses & others looking for plug-&-play basic Layer 2 connectivity for their network, including low-cost Po E+ & 10 Gb E uplink models. The HPE 1420 Switch Series has four models: 16-port 10/100/1000, 24-port 10/100/1000 with two SFP Gigabit ports, 24-port 10/100/1000 ports of which 12 are Po E+ enabled (124 W Po E budget), & 24-port 10/100/1000 with two SFP+ 10 Gb E ports.\n\n\n\n Features\n\n\n\n High-performance Gb E Layer 2 Switching, Cost-effective & Easy to Deploy\n\n- The HPE 1420 Switch Series offers small businesses & others Layer 2 Gigabit Ethernet switching with unmanaged affordability & plug-&-play simplicity.\n\n- Gigabit Ethernet is the most recommended & deployed networking technology today, delivering 10 times more performance than Fast Ethernet.\n\n- Unmanaged switches are the most economical offerings, ideal for locations needing only basic Layer 2 switching in a flat single tier network.\n\n\n\n Model Choices to Meet Most Design Needs for Basic Layer 2 Networking\n\n- The HPE 1420 Switch Series has four models to choose from, all with Gigabit performance but offering different uplink options. Consider the 16-port model for locations needing fewer connections & one of the 24-port models where more connectivity is required.\n\n- The 1420-24G-2SFP model with SFP uplinks is ideal where Gigabit fiber is required, while the 1420-24G-2SFP+ 10G Uplink model with SFP+ uplinks is available where 10 Gb E is needed now or in the future.\n\n- Anticipate the installation of IP voice, wireless Access points, or video surveillance cameras by deploying Power over Ethernet (Po E). Choose the Po E+ model for highly cost-effective Po E deployments.\n\n- All 1420 Switch Series models are fanless for silent operation, usable in office settings around workers. Units have internal power supplies with power-cord plug-in simplicity.\n\n- Units can be deployed for desktop operation or can be rack mounted.\n\n\n\n Automated Features for Hands-off Operation\n\n- All HPE 1420 Switch Series models are plug-&-play with zero configuration & no required ongoing administration.\n\n- The switch series has the company's only unmanaged Po E model, with fully automated support for powering compatible IP phones, video surveillance cameras or wireless Access Points.\n\n- The HPE 1420-24G-2SFP+ 10G Uplink Switch requires no configuration beyond installation of optional 10 Gb E transceivers to achieve 10 Gb E speeds. Alternatively, use today with Gigabit SFP transceivers if higher performance is merely a future requirement.\n\n- IEEE 802.1p prioritization & other Qo S features automate the preferred handling of high priority traffic, including Differentiated Services Code Point (DSCP) set priorities.\n\n- The 1420 Switch Series supports Jumbo packets to improve the performance of large data transfers.\n\n\n\n Cost-effective Ownership for Now & into the Future\n\n- The HPE 1420 Switch Series offers a cost-effective upgrade path to next-generation 10 Gb E networks to reduce performance bottlenecks when connecting to storage & servers.\n\n- The switch series

Includes:: Po E+ options to power IP devices without the cost of additional cabling for power.\n\n- Green features include energy-efficient Ethernet IEEE 802.3az, auto-power down mode on idle ports, & power savings on short distance cables for low power consumption.\n\n- Limited Lifetime Warranty.\n \n \n \n Specifications\n \n Ports & interfaces Copper ethernet cabling technology 10BASE-T, 100BASE-TX, 1000BASE-TBasic switching RJ-45 Ethernet ports quantity 5 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000) Performance Packet buffer memory 1 MBStackable Yes Technical details Form factor 1UProduct colour Grey Stackable Yes Rack mounting Yes Management features Switch type Unmanaged Quality of Service (Qo S) support Yes Switch layer L2 Networking Auto-sensing Yes Copper ethernet cabling technology 10BASE-T, 100BASE-TX, 1000BASE-TNetworking standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3u Full duplex Yes Flow control support Yes Auto MDI/MDI-XYes 10G support No Data transmission Throughput 7.4 Mpps Latency (10-100 Mbps)3 &181;s Latency (1 Gbps)2.6 &181;s Packet buffer memory 1 MBMAC address table 2048 entries Switching capacity 10 Gbit/s Jumbo frames support Yes Memory Packet buffer memory 1 MBDesign Form factor 1UProduct colour Grey Stackable Yes Rack mounting Yes Power AC input voltage 100
- 240 VAC input frequency 50
- 60 Hz Power consumption (typical)40 WPower over Ethernet (Po E) Total Power over Ethernet (Po E) budget 32 WPower over Ethernet (Po E) Yes Operational conditions Storage temperature (T-T)-40
- 70 &176;CStorage relative humidity (H-H)15
- 95% Operating temperature (T-T)0
- 40 &176;COperating relative humidity (H-H)15
- 95% Weight & dimensions Width 157.7 mm Depth 104.9 mm Height 26.9 mm Weight 500 g\n \n \n\n \n\n\n\n\n\n







...

\n\n\n \n Hewlett Packard Enterprise Office Connect 1420 5G Po E+ (32W) Unmanaged L2 Gigabit Ethernet (10/100/1000) Grey 1U Power over Ethernet (Po E)\n \n \n \n \n \n \n Manufacturer:\n Hewlett Packard Enterprise\n \n \n Category:\n Networking\n \n \n Sub-Category:\n Network Switches\n \n \n SKU:\n JH328A\n \n \n EAN:\n 0889296966234 0889296966272 0889296966203 5415247123446 5415247105596 0889296966227 0889296966289 4058154105238\n \n \n \n \n \n Description\n \n \n The HPE 1420 Switch Series consists of unmanaged Gigabit Ethernet switches for small businesses & others looking for plug-&-play basic Layer 2 connectivity for their network, including low-cost Po E+ & 10 Gb E uplink models. The HPE 1420 Switch Series has four models: 16-port 10/100/1000, 24-port 10/100/1000 with two SFP Gigabit ports, 24-port 10/100/1000 ports of which 12 are Po E+ enabled (124 W Po E budget), & 24-port 10/100/1000 with two SFP+ 10 Gb E ports.\n\n\n\n Features\n\n\n\n High-performance Gb E Layer 2 Switching, Cost-effective & Easy to Deploy\n\n- The HPE 1420 Switch Series offers small businesses & others Layer 2 Gigabit Ethernet switching with unmanaged affordability & plug-&-play simplicity.\n\n- Gigabit Ethernet is the most recommended & deployed networking technology today, delivering 10 times more performance than Fast Ethernet.\n\n- Unmanaged switches are the most economical offerings, ideal for locations needing only basic Layer 2 switching in a flat single tier network.\n\n\n\n Model Choices to Meet Most Design Needs for Basic Layer 2 Networking\n\n- The HPE 1420 Switch Series has four models to choose from, all with Gigabit performance but offering different uplink options. Consider the 16-port model for locations needing fewer connections & one of the 24-port models where more connectivity is required.\n\n- The 1420-24G-2SFP model with SFP uplinks is ideal where Gigabit fiber is required, while the 1420-24G-2SFP+ 10G Uplink model with SFP+ uplinks is available where 10 Gb E is needed now or in the future.\n\n- Anticipate the installation of IP voice, wireless Access points, or video surveillance cameras by deploying Power over Ethernet (Po E). Choose the Po E+ model for highly cost-effective Po E deployments.\n\n- All 1420 Switch Series models are fanless for silent operation, usable in office settings around workers. Units have internal power supplies with power-cord plug-in simplicity.\n\n- Units can be deployed for desktop operation or can be rack mounted.\n\n\n\n Automated Features for Hands-off Operation\n\n- All HPE 1420 Switch Series models are plug-&-play with zero configuration & no required ongoing administration.\n\n- The switch series has the company's only unmanaged Po E model, with fully automated support for powering compatible IP phones, video surveillance cameras or wireless Access Points.\n\n- The HPE 1420-24G-2SFP+ 10G Uplink Switch requires no configuration beyond installation of optional 10 Gb E transceivers to achieve 10 Gb E speeds. Alternatively, use today with Gigabit SFP transceivers if higher performance is merely a future requirement.\n\n- IEEE 802.1p prioritization & other Qo S features automate the preferred handling of high priority traffic, including Differentiated Services Code Point (DSCP) set priorities.\n\n- The 1420 Switch Series supports Jumbo packets to improve the performance of large data transfers.\n\n\n\n Cost-effective Ownership for Now & into the Future\n\n- The HPE 1420 Switch Series offers a cost-effective upgrade path to next-generation 10 Gb E networks to reduce performance bottlenecks when connecting to storage & servers.\n\n- The switch series

Includes:: Po E+ options to power IP devices without the cost of additional cabling for power.\n\n- Green features include energy-efficient Ethernet IEEE 802.3az, auto-power down mode on idle ports, & power savings on short distance cables for low power consumption.\n\n- Limited Lifetime Warranty.\n \n \n \n Specifications\n \n Ports & interfaces Copper ethernet cabling technology 10BASE-T, 100BASE-TX, 1000BASE-TBasic switching RJ-45 Ethernet ports quantity 5 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000) Performance Packet buffer memory 1 MBStackable Yes Technical details Form factor 1UProduct colour Grey Stackable Yes Rack mounting Yes Management features Switch type Unmanaged Quality of Service (Qo S) support Yes Switch layer L2 Network Auto-sensing Yes Copper ethernet cabling technology 10BASE-T, 100BASE-TX, 1000BASE-TNetworking standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3u Full duplex Yes Flow control support Yes Auto MDI/MDI-XYes 10G support No Data transmission Throughput 7.4 Mpps Latency (10-100 Mbps)3 &181;s Latency (1 Gbps)2.6 &181;s Packet buffer memory 1 MBMAC address table 2048 entries Switching capacity 10 Gbit/s Jumbo frames support Yes Memory Packet buffer memory 1 MBDesign Form factor 1UProduct colour Grey Stackable Yes Rack mounting Yes Power AC input voltage 100
- 240 VAC input frequency 50
- 60 Hz Power consumption (typical)40 WPower over Ethernet (Po E) Total Power over Ethernet (Po E) budget 32 WPower over Ethernet (Po E) Yes Operational conditions Storage temperature (T-T)-40
- 70 &176;CStorage relative humidity (H-H)15
- 95% Operating temperature (T-T)0
- 40 &176;COperating relative humidity (H-H)15
- 95% Weight & dimensions Width 157.7 mm Depth 104.9 mm Height 26.9 mm Weight 500 g\n \n \n\n \n\n\n\n\n\n







...