Small to Medium Business VPN Router with IPSec, PPTP, L2TP, SSL VPN. Dual WAN port with USB (Universal Serial Bus) 3G failover. 130 Mbps throughput, up to 70 VPN tunnels, 600 Policies. Dual band (2.4 G Hz/5 GHz) 11n wireless.
- 4x Gigabit LAN, 2x Gigabit WAN, 2x 2.0 USB (Universal Serial Bus) ports
- IEEE 802.11n Wireless LAN (2.4 G Hz/5 G Hz) with MIMO
- SSL/IPSec/PPTP/L2TP Hub & Spoke VPN
- WAN Load Balancing & Failover to 3G*
- Stateful Packet Inspection (SPI) Firewall
- Intrusion Prevention System (IPS)
- VLAN Support
- IGMP Proxy/ Snooping
- Layer 2 to Layer 7 Access Control
- Remote Management (Web, SNMP, SSH, Telnet)
- IPv 6 Support
- Internal Power Supply
- 19" Rack Mount Kit Included
- D-Link Green Technology













...

D-Link Unified Services Routers provide secure, high performance networking solutions to address the growing needs of small & medium businesses. The integrated high-speed IEEE 802.11n wireless technology in the DSR-250N, DSR-500N, & the DSR-1000N routers offers comparable performance to traditional wired networks, but with fewer limitations. Each router provides optimal network security via features such as Virtual Private Network (VPN) tunnels, IP Security (IPSec), Point-to-Point Tunneling Protocol (PPTP), Layer 2 Tunneling Protocol (L2TP), & Secure Sockets Layer (SSL). These routers also allow you to empower your road warriors with clientless remote access anywhere & anytime using SSL VPN tunnels. Comprehensive Management Capabilities The DSR-500/500N & DSR-1000/1000N include dual WAN Gigabit Ethernet that provides policy-based service management to ensure maximum productivity for your business operations. The failover feature maintains data traffic without disconnecting when a landline connection is lost. The Outbound Load Balancing feature adjusts outgoing traffic across two WAN interfaces & optimizes system performance, resulting in high availability. The second WAN port can be configured as a DMZ port, allowing you to isolate servers from your LAN. Superior Wireless Performance Designed to deliver superior wireless performance, the DSR-250N, DSR-500N, & DSR-1000N include 802.11a/b/g/n, allowing for operation on either the 2.4 GHz or 5 GHz wireless LAN radio bands. Multiple In Multiple Out (MIMO) technology allows the DSR-250N, DSR-500N & DSR-1000N to provide high data rates & a wide wireless coverage area with minimized dead spots." Robust VPN Features A fully featured virtual private network (VPN) provides your mobile workers & branch offices with a secure link to your network. The DSR-250N, DSR-500/500N, & DSR-1000/1000N are capable of simultaneously managing 5, 10, or 20 Secure Sockets Layer (SSL) VPN tunnels respectively, empowering your mobile users by providing remote access to a central corporate database. Site-tosite VPN tunnels use IP Security (IPSec) Protocol, Point-to-Point Tunneling Protocol (PPTP), or Layer 2 Tunneling Protocol (L2TP) to facilitate branch office connectivity through ncrypted virtual links. The DSR-250N supports up to 25 simultaneous VPN tunnels, the DSR-500/500N supports up to 35 VPN tunnels, & the DSR-1000/1000N supports up to 70 VPN tunnels. Efficient Green Technology As a concerned member of the global community, D-Link is devoted to providing eco-friendly products. D-Link Green Wi-Fi & D-Link Green Ethernet features save power & help cut energy usage costs. The D-Link Green WLAN Scheduler shuts down your wireless network automatically according to a schedule you define, allowing you to turn off your wireless network during off-peak hours, saving energy & keeping your network secure. The D-Link Green Ethernet feature can detect the length of the cables connected to the router, & can adjust power usage accordingly to save energy automatically without sacrificing performance. It can also detect if a link is down on a port, & automatically puts that port into a sleep mode that drastically reduces the amount of power used. In addition, compliance with Ro HS (Restriction of Hazardous Substances) & WEEE (Waste Electrical & Electronic Equipment) directives make D-Link Green certified devices an environmentally responsible choice. ...

D-Link Unified Services Routers provide secure, high performance networking solutions to address\nthe growing needs of small & medium businesses. The integrated high-speed IEEE 802.11n wireless technology in the DSR-250N, DSR-500N, & the DSR-1000N routers offers comparable performance to traditional wired networks, but with fewer limitations. Each router provides optimal network security via features such as Virtual Private Network (VPN) tunnels, IP Security (IPSec), Point-to-Point Tunneling Protocol (PPTP), Layer 2 Tunneling Protocol (L2TP), & Secure Sockets Layer (SSL). These routers also allow you to empower your road warriors with clientless remote access anywhere & anytime using SSL VPN tunnels.\n\n Comprehensive Management Capabilities\n The DSR-500/500N & DSR-1000/1000N include dual WAN Gigabit Ethernet that provides policy-based service management to ensure maximum productivity for your business operations. The failover feature maintains data traffic without disconnecting when a landline connection is lost. The Outbound Load Balancing feature adjusts outgoing traffic across two WAN interfaces & optimizes system performance, resulting in high availability. The second WAN port can be configured as a DMZ port, allowing you to isolate servers from your LAN.\n\n Superior Wireless Performance\n Designed to deliver superior wireless performance, the DSR-250N, DSR-500N, & DSR-1000N include 802.11a/b/g/n, allowing for operation on either the 2.4 GHz or 5 GHz wireless LAN radio bands. Multiple In Multiple Out (MIMO) technology allows the DSR-250N, DSR-500N & DSR-1000N to provide high data rates & a wide wireless coverage area with minimized &156;dead spots.&157;\n\n Robust VPN Features\n A fully featured virtual private network (VPN) provides your mobile workers & branch offices\nwith a secure link to your network. The DSR-250N, DSR-500/500N, & DSR-1000/1000N are capable of simultaneously managing 5, 10, or 20 Secure Sockets Layer (SSL) VPN tunnels respectively, empowering your mobile users by providing remote access to a central corporate database. Site-tosite VPN tunnels use IP Security (IPSec) Protocol, Point-to-Point Tunneling Protocol (PPTP), or Layer 2 Tunneling Protocol (L2TP) to facilitate branch office connectivity through ncrypted virtual links. The DSR-250N supports up to 25 simultaneous VPN tunnels, the DSR-500/500N supports up to 35 VPN tunnels, & the DSR-1000/1000N supports up to 70 VPN tunnels.\n\n Efficient Green Technology\n As a concerned member of the global community, D-Link is devoted to providing eco-friendly products. D-Link Green Wi-Fi & D-Link Green Ethernet features save power & help cut energy usage costs. The D-Link Green WLAN Scheduler shuts down your wireless network automatically according to a schedule you define, allowing you to turn off your wireless network during off-peak hours, saving energy & keeping your network secure. The D-Link Green Ethernet feature can detect the length of the cables connected to the router, & can adjust power usage accordingly to save energy automatically without sacrificing performance. It can also detect if a link is down on a port, & automatically puts that port into a sleep mode that drastically reduces the amount of power used. In addition, compliance with Ro HS (Restriction of Hazardous Substances) and\n WEEE (Waste Electrical & Electronic Equipment) directives make D-Link Green certified devices an\nenvironmentally responsible choice.\n\n\n\n Feature Feature Value\n\n\n\n\n Ethernet WAN\n Y\n\n\n Wi-Fi band\n Single-band (2.4 GHz)\n\n\n Top Wi-Fi standard\n Wi-Fi 4 (802.11n)\n\n\n Wi-Fi standards\n 802.11b, 802.11g, Wi-Fi 4 (802.11n)\n\n\n Ethernet LAN\n Y\n\n\n Ethernet LAN interface type\n Gigabit Ethernet\n\n\n Networking standards\n IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1Q, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x\n\n\n Ethernet LAN data rates\n 10, 100, 1000 Mbit/s\n\n\n Cabling technology\n 10/100/1000 Base-T (X)\n\n\n VPN tunnels quantity\n 25\n\n\n Ethernet LAN (RJ-45) ports\n 10\n\n\n USB port\n Y\n\n\n USB 2.0 ports quantity\n 1\n\n\n DC-in jack\n Y\n\n\n Reset button\n Y\n\n\n Security algorithms\n WEP, WPA-PSK, WPS\n\n\n Firewall security\n Port Address Translation (PAT)\n\n\n Network address translation (NAT)\n Y\n\n\n DHCP client\n Y\n\n\n DHCP server\n Y\n\n\n Management protocols\n SNMP, HTTP/HTTPS\n\n\n Supported network protocols\n I Pv 6\n\n\n Product colour\n Black\n\n\n Antenna gain level (max)\n 2 d Bi\n\n\n Antennas quantity\n 2\n\n\n Mean time between failures (MTBF)\n 250000 h\n\n\n Safety\nc UL, LVD\n\n\n Certification\n FCC Class B, CE Class B, C-Tick\n\n\n Power consumption (typical)\n 15.6 W\n\n\n Operating temperature (T-T)\n 0
- 40 &176;C\n\n\n Storage temperature (T-T)\n-20
- 70 &176;C\n\n\n Operating relative humidity (H-H)\n 5
- 95%\n\n\n Width\n 203 mm\n\n\n Depth\n 140 mm\n\n\n Height\n 35 mm\n\n\n USB ports quantity\n 1\n\n\n Dimensions (Wx Dx H)\n 280 x 180 x 44 mm\n\n\n Number of users\n 25 user (s)\n\n\n Networking features\n Gigabit Ethernet\n\n\n Maximum data transfer rate\n 1 Gbit/s\n\n\n Interface\n Ethernet\n\n\n Input current\n 2.5 A\n\n\n Input voltage\n 12 V\n\n\n Data transfer rate\n 1000 Mbit/s\n\n\n Compliance industry standards\n IEEE 802.3, IEEE 802.3u, IEEE 802.3ab\n\n\n


...

The DSS-100E-18P is part of D-Link&153;s premier Power over Ethernet (Po E) Surveillance Switch series. They are the safest, most reliable & all-round best solutions for surveillance deployments.\n\n Designed for Surveillance\n The DSS-100E-18P has a total Po E power budget of 230W, with up to 30W on each port meaning it&153;s ready to power your Po E-ready cameras & other devices. Simply connect your Po E supported devices & you&153;ve got a capable surveillance network with minimal wiring required. Meanwhile, it has an extended Po E range of 250m, reaching devices further than before. Finally, its Gigabit uplink provides ample bandwidth. This ensures smooth transmission of footage when connecting to Network Video Recorder (NVR) or core switch.\n\n Reach Further\n The DSS-100E-18P surveillance switch can be further combined with the DPE-302GE Po E Extender to maximize your Po E camera deployment distance to virtually anywhere, drastically lowering the cost for installing any Po E Ethernet devices. It provides you huge time & cost savings & greater flexibility of endpoint device positioning.\n\n- Power your device up to a distance of 650 meters at 10 Mbps\n- Innovative design reduces long distance power transmission loss\n- Leverages existing copper twisted-pair cabling to deliver electrical power over the same network connection\n\n Versatility for a Range of Scenarios\n The DSS-100E-18P is not just for cameras, it&153;s ready to support other surveillance-related devices as well. Simply plug in the devices you need to complete your setup; the switch can then automatically detect what has been connected. It then adjusts accordingly to provide optimal performance. Ideal for a power surveillance with minimal management fuss.\n\n Weather the Storm\n The DSS-100E-18P is equipped with 6k V surge protection. This keeps the switch safe against lightning strikes or other power related incidents. This shield will prevent Po E devices from damage, ensuring your vital surveillance systems continue to function without interruption.\n\n Plug & Play\n The DSS-100E-18P is developed with simple setup in mind. No configuration is required, simply connect the switch to your network & you are ready to go. You can start adding IP cameras, IP phones & other Po E & non-Po E capable devices to your network. Meanwhile, the switch will automatically detect what has been connected & intelligently adjust to offer optimal performance. It is ideal for those who want a powerful network, without the fuss of managing it.\n\n Compatible with a Wide Range of D-Link Po E-Enabled Cameras\n Our switches are highly compatible with a variety of cameras. You can be safe in the knowledge that the cameras & devices you choose will easily integrate into your surveillance network.\n\n Better for Your Budget, Better for the Planet\n To further cut OPEX, the DSS-100E-18P supports IEEE 802.3az Energy Efficient Ethernet. The switch can automatically detect when network traffic is being passed through ports. Those that are not in use are powered down. Not just good for cutting operating costs, but better for the environment too.\n\n Standard mode\n All ports can communicate with each other, working as a common unmanaged switch. Ports 1 to 16 support Po E to devices up to 100m away & transmit data at 10/100 Mbps.\n Meanwhile ports 1 to 8 support port priority to optimize port cache.\n\n Isolation mode\n To enhance security, ports 1-16 are separated, allowing each to only communicate with ports 17 & 18. This protects the network from tampering.\n\n Extend mode\n Have a device more than 100m away? Use this mode to keep supplying Po E over distances of 100m, doing away with the need for more equipment such as Po E extenders.\n\n\n\n\n\n Product Model: DSS-100E-18P\n\n\n ...

The DSS-100E-18P is part of D-Link&153;s premier Power over Ethernet (Po E) Surveillance Switch series. They are the safest, most reliable & all-round best solutions for surveillance deployments.\n\n Designed for Surveillance\n The DSS-100E-18P has a total Po E power budget of 230W, with up to 30W on each port meaning it&153;s ready to power your Po E-ready cameras & other devices. Simply connect your Po E supported devices & you&153;ve got a capable surveillance network with minimal wiring required. Meanwhile, it has an extended Po E range of 250m, reaching devices further than before. Finally, its Gigabit uplink provides ample bandwidth. This ensures smooth transmission of footage when connecting to Network Video Recorder (NVR) or core switch.\n\n Reach Further\n The DSS-100E-18P surveillance switch can be further combined with the DPE-302GE Po E Extender to maximize your Po E camera deployment distance to virtually anywhere, drastically lowering the cost for installing any Po E Ethernet devices. It provides you huge time & cost savings & greater flexibility of endpoint device positioning.\n\n- Power your device up to a distance of 650 meters at 10 Mbps\n- Innovative design reduces long distance power transmission loss\n- Leverages existing copper twisted-pair cabling to deliver electrical power over the same network connection\n\n Versatility for a Range of Scenarios\n The DSS-100E-18P is not just for cameras, it&153;s ready to support other surveillance-related devices as well. Simply plug in the devices you need to complete your setup; the switch can then automatically detect what has been connected. It then adjusts accordingly to provide optimal performance. Ideal for a power surveillance with minimal management fuss.\n\n Weather the Storm\n The DSS-100E-18P is equipped with 6k V surge protection. This keeps the switch safe against lightning strikes or other power related incidents. This shield will prevent Po E devices from damage, ensuring your vital surveillance systems continue to function without interruption.\n\n Plug & Play\n The DSS-100E-18P is developed with simple setup in mind. No configuration is required, simply connect the switch to your network & you are ready to go. You can start adding IP cameras, IP phones & other Po E & non-Po E capable devices to your network. Meanwhile, the switch will automatically detect what has been connected & intelligently adjust to offer optimal performance. It is ideal for those who want a powerful network, without the fuss of managing it.\n\n Compatible with a Wide Range of D-Link Po E-Enabled Cameras\n Our switches are highly compatible with a variety of cameras. You can be safe in the knowledge that the cameras & devices you choose will easily integrate into your surveillance network.\n\n Better for Your Budget, Better for the Planet\n To further cut OPEX, the DSS-100E-18P supports IEEE 802.3az Energy Efficient Ethernet. The switch can automatically detect when network traffic is being passed through ports. Those that are not in use are powered down. Not just good for cutting operating costs, but better for the environment too.\n\n Standard mode\n All ports can communicate with each other, working as a common unmanaged switch. Ports 1 to 16 support Po E to devices up to 100m away & transmit data at 10/100 Mbps.\n Meanwhile ports 1 to 8 support port priority to optimize port cache.\n\n Isolation mode\n To enhance security, ports 1-16 are separated, allowing each to only communicate with ports 17 & 18. This protects the network from tampering.\n\n Extend mode\n Have a device more than 100m away? Use this mode to keep supplying Po E over distances of 100m, doing away with the need for more equipment such as Po E extenders.\n\n\n\n\n\n Product Model: DSS-100E-18P\n\n\n ...

The DUB-1312 USB (Universal Serial Bus) 3.0 to Gigabit Ethernet Adapter means that you can instantly add gigabit connectivity to your desktop, notebook, or netbook computer. Just plug the DUB-1312 in to an available USB (Universal Serial Bus) 3.0 port & you&153;re ready to connect to your switch, hub, or router with the speed & reliability of a wired gigabit connection.\n\n Fast Ethernet Connectivity\n The DUB-1312 USB (Universal Serial Bus) 3.0 to Gigabit Ethernet Adapter plugs into any available USB (Universal Serial Bus) port on your computer to enable you to connect to an Ethernet network at speeds up to 1 Gbps. High-speed gigabit Ethernet means that you can transfer large files in no time, or make light work of backups to a server or network storage device. The adapter eliminates the need to open your computer to install a network card, & it also keeps your computer&153;s expansion slots free for other uses.\n\n Easy to Install & Use\n The DUB-1312 USB (Universal Serial Bus) 3.0 to Gigabit Ethernet Adapter connects to your computer&153;s USB (Universal Serial Bus) 3.0 port & is ready to run almost as soon as it&153;s plugged in. There is no need to change any configuration settings on your computer, as the drivers are installed automatically after you insert the included installation CD1. For extra convenience, the adapter&153;s compact design means you can easily slip the DUB-1312 into your pocket or laptop bag & take it with you.\n\n Energy-saving Functionality\n Power to the DUB-1312 is provided directly by the USB (Universal Serial Bus) port, eliminating the need for an external AC power adapter. The DUB-1312 not only supports the USB (Universal Serial Bus) 3.0 standard&153;s power-saving features, but also

Includes:: an energysaving suspend & resume function to minimize power consumption when network traffic is light, the device is idle, or when the Ethernet cable is unplugged. This feature is especially useful if you are using a notebook or netbook computer, as it helps conserve battery life, allowing you to keep working for longer without needing to recharge.\n\n 1 Windows operating systems support plug-&-play functionality. Other operating systems may require software installation before the product can be used. Windows XP requires users to confirm before automatic installation can begin. Feature Feature Value Connectivity technology Wired Host interface USBInterface Ethernet Ethernet LAN (RJ-45) ports 1 Maximum data transfer rate 1000 Mbit/s Internal Y Product colour Black Plug & Play YLED indicators Activity, Link Certification CE, FCCOutput voltage 5 VOperating temperature (T-T)0
- 45 &176;CStorage temperature (T-T)-20
- 70 &176;CWidth 74.4 mm Depth 21 mm Height 16 mm Weight 46.4 g Relative humidity 10
- 90%




...

The D-Link DUB-E100 is a Hi-Speed USB (Universal Serial Bus) 2.0 10/100 Mbps Fast Ethernet Adapter specifically designed to plug into an available Universal Serial Bus (USB) port on a desktop or laptop PC running Microsoft Windows XP, Me, 2000 or 98SE. Based on USB (Universal Serial Bus) 2.0, the DUB-E100 extends the transfer speed of earlier USB (Universal Serial Bus) Fast Ethernet adapters to true 10/100 Mbps connectivity. As a USB (Universal Serial Bus) device, the D-Link DUB-E100 eliminates the need to use an ISA, PCI, or PC Card slot to add LAN connectivity to a PC desktop or laptop computer. Installation & use are further simplified by living up to USB's out-of-the-box installation approach to connecting computer peripherals. You will not need to open the case of your computer, nor will you be required to set IRQ's. The D-Link DUB-E100 represents the simplest way to connect your computer to an Ethernet based network. The D-Link DUB-E100 provides a standard RJ-45 connector for a quick & simple method of connecting to an Ethernet 10 Mbps or Fast Ethernet 100 Mbps based LAN via a network hub or switch. The built-in USB (Universal Serial Bus) 2.0 cable connects directly to your computer or laptop. Power for the DUB-E100 is provided directly by the USB (Universal Serial Bus) bus, eliminating the need for an external power adapter. It also supports USB's energy saving suspend & resume functions to minimize power consumption, which is especially useful for laptop/notebook users. ...

The D-Link DUB-E100 is a Hi-Speed USB (Universal Serial Bus) 2.0 10/100 Mbps Fast Ethernet Adapter specifically designed to plug into an available Universal Serial Bus (USB) port on a desktop or laptop PC running Microsoft Windows XP, Me, 2000 or 98SE. Based on USB (Universal Serial Bus) 2.0, the DUB-E100 extends the transfer speed of earlier USB (Universal Serial Bus) Fast Ethernet adapters to true 10/100 Mbps connectivity.\n\n As a USB (Universal Serial Bus) device, the D-Link DUB-E100 eliminates the need to use an ISA, PCI, or PC Card slot to add LAN connectivity to a PC desktop or laptop computer. Installation & use are further simplified by living up to USB's out-of-the-box installation approach to connecting computer peripherals. You will not need to open the case of your computer, nor will you be required to set IRQ's. The D-Link DUB-E100 represents the simplest way to connect your computer to an Ethernet based network.\n\n The D-Link DUB-E100 provides a standard RJ-45 connector for a quick & simple method of connecting to an Ethernet 10 Mbps or Fast Ethernet 100 Mbps based LAN via a network hub or switch. The built-in USB (Universal Serial Bus) 2.0 cable connects directly to your computer or laptop.\n\n Power for the DUB-E100 is provided directly by the USB (Universal Serial Bus) bus, eliminating the need for an external power adapter. It also supports USB's energy saving suspend & resume functions to minimize power consumption, which is especially useful for laptop/notebook users. Feature Feature Value Connectivity technology Wired Host interface USBInterface Ethernet Ethernet LAN (RJ-45) ports 1 Maximum data transfer rate 100 Mbit/s Networking standards IEEE 802.3, IEEE 802.3u Cabling technology 10/100 Base T (X) Full duplex Y Internal N Product colour Black LED indicators Link, Power Certification FCC Class B, CE Class BInput current 0.5 APower consumption (typical)2.5 WPower consumption 150 m A Operating temperature (T-T)0
- 55 &176;CStorage temperature (T-T)20
- 70 &176;COperating relative humidity (H-H)0
- 95% Storage relative humidity (H-H)5
- 95% Windows operating systems supported Windows 2000, Windows 2000 Professional, Windows 98, Windows ME, Windows XP Home, Windows XP Home x 64, Windows XP Professional, Windows XP Professional x 64 Width 21.3 mm Depth 73 mm Height 20 mm Weight 22 g Compliance industry standards OHCI, EHCISupported data transfer rates 10/100 Ports quantity 1



...

The D-Link DUB-E100 is a Hi-Speed USB (Universal Serial Bus) 2.0 10/100 Mbps Fast Ethernet Adapter specifically designed to plug into an available Universal Serial Bus (USB) port on a desktop or laptop PC running Microsoft Windows XP, Me, 2000 or 98SE. Based on USB (Universal Serial Bus) 2.0, the DUB-E100 extends the transfer speed of earlier USB (Universal Serial Bus) Fast Ethernet adapters to true 10/100 Mbps connectivity.\n\n As a USB (Universal Serial Bus) device, the D-Link DUB-E100 eliminates the need to use an ISA, PCI, or PC Card slot to add LAN connectivity to a PC desktop or laptop computer. Installation & use are further simplified by living up to USB's out-of-the-box installation approach to connecting computer peripherals. You will not need to open the case of your computer, nor will you be required to set IRQ's. The D-Link DUB-E100 represents the simplest way to connect your computer to an Ethernet based network.\n\n The D-Link DUB-E100 provides a standard RJ-45 connector for a quick & simple method of connecting to an Ethernet 10 Mbps or Fast Ethernet 100 Mbps based LAN via a network hub or switch. The built-in USB (Universal Serial Bus) 2.0 cable connects directly to your computer or laptop.\n\n Power for the DUB-E100 is provided directly by the USB (Universal Serial Bus) bus, eliminating the need for an external power adapter. It also supports USB's energy saving suspend & resume functions to minimize power consumption, which is especially useful for laptop/notebook users. Feature Feature Value Connectivity technology Wired Host interface USBInterface Ethernet Ethernet LAN (RJ-45) ports 1 Maximum data transfer rate 100 Mbit/s Networking standards IEEE 802.3, IEEE 802.3u Cabling technology 10/100 Base T (X) Full duplex Y Internal N Product colour Black LED indicators Link, Power Certification FCC Class B, CE Class BInput current 0.5 APower consumption (typical)2.5 WPower consumption 150 m A Operating temperature (T-T)0
- 55 &176;CStorage temperature (T-T)20
- 70 &176;COperating relative humidity (H-H)0
- 95% Storage relative humidity (H-H)5
- 95% Windows operating systems supported Windows 2000, Windows 2000 Professional, Windows 98, Windows ME, Windows XP Home, Windows XP Home x 64, Windows XP Professional, Windows XP Professional x 64 Width 21.3 mm Depth 73 mm Height 20 mm Weight 22 g Compliance industry standards OHCI, EHCISupported data transfer rates 10/100 Ports quantity 1



...

Add a second screen at up to 4K resolutions\n \n Connect a second display to the 4K HDMI port for video up to 4K resolution with no lag\n \n Super Speed USB (Universal Serial Bus) 3.0\n \n Transfer data at 5 Gbps. Ideal for transferring from USB (Universal Serial Bus) drives, phones, tablets, cameras, & other peripherals.\n \n Plug & Play\n \n Add more available ports simply by plugging the hub into a USB (Universal Serial Bus)-C port. No additional software required.\n \n Power Delivery\n \n Deliver up to 60W of power through the hub to your laptop by connecting your USB (Universal Serial Bus)-C charger to the USB (Universal Serial Bus)-C port.\n \n Thunderbolt 3\n \n Use the Thunderbolt 3 port to transfer data, deliver power, or extend your display in seconds.\n \n Turn one port into four new ports.\n \n Instantly add an HDMI port for a second display, two USB (Universal Serial Bus) 3.0 ports, while keeping a USB'C port free for your laptop simply by plugging the hub into a USB'C port.\n \n Transfer Large Files in Seconds\n \n Use the hub to quickly transfer files to your USB (Universal Serial Bus) devices like phones, tablets, external hard drives, & flash drives, to your computer. It has the latest USB (Universal Serial Bus) 3.0 technology built in to make transfers of music, HD videos, entire photo albums, backups & other large files up to x 10 faster than USB (Universal Serial Bus) 2.0. You can connect older USB (Universal Serial Bus) 2.0/1.1/1.0 devices as well as ones using the latest USB (Universal Serial Bus) 3.0 technology.\n \n Easy to take with you everywhere.\n \n The hub&153;s compact design makes it convenient to carry with you anywhere & it fits into any laptop bag. When you need it, simply plug the hub into any Mac, Windows or Linux computer with a USB (Universal Serial Bus)-C port. It&153;s that easy. No drivers needed, & no complex software installation required.\n \n Extend your screen to a vivid 4K monitor.\n \n Plug into the hub&153;s HDMI port to instantly mirror or extend your display to a second monitor with vibrant 4K resolution. & full backwards compatibility means you can connect to a 720p or 1080p monitor.\n \n Deliver power through the hub.\n \n With the Power Delivery feature, you can charge your laptop at the same time as connecting to your USB (Universal Serial Bus) peripheral devices. Simply connect your USB (Universal Serial Bus)-C charger to the hub&153;s USB (Universal Serial Bus)-C port to provide up to 60W of power to your laptop.\n\n class="generic"> Ports & interfaces USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity 2USB 3.2 Gen 1 (3.1 Gen 1) Type-C ports quantity 1 Host interface USB 3.2 Gen 1 (3.1 Gen 1) Type-CHDMI ports quantity 1HDMI version 1.4 Microphone in No Connectivity technology Wired USB Power Delivery Yes USB Power Delivery up to 60 WNetwork Ethernet LANNo Performance Maximum digital resolution 4096 x 2160 pixels Product colour Black, Silver Card reader integrated No Plug & Play Yes Data transfer rate 5 Gbit/s Certification CE, FCC, IC, RCMTechnical details Product colour Black, Silver Plug & Play Yes Data transfer rate 5 Gbit/s Storage Card reader integrated No Power Input current 0.031 AOutput voltage 20 VOutput current 3 ASoftware Windows operating systems supported Yes Mac operating systems supported Yes Other operating systems supported Chrome Weight & dimensions Weight 50 g Width 68 mm Depth 67 mm Height 18 mm Design Windows operating systems supported Yes Mac operating systems supported Yes Product colour Black, Silver Certification CE, FCC, IC, RCMOperational conditions Operating temperature (T-T)0
- 70 &176;CStorage temperature (T-T)-25
- 85 &176;COperating relative humidity (H-H)5
- 80% Storage relative humidity (H-H)5
- 80% Certificates Certification CE, FCC, IC, RCM\n\n\n\nhttp://objects.icecat.biz/objects/mmo_78364474_1583935347_4058_12200.pdf



...