More From Contributor

£287.15
The 10GBASE-T SFP+ transceiver module delivers the flexibility & port density well known to the SFP+ form-factor, utilising Cat 6a UTP structured cabling for network connectivity. It is a power-optimised solution for lengths up to 30m, engineered to deliver a minimum power saving of at least 0.5W per port compared to an equivalent embedded 10GBASE-T RJ45 for the same length (Cat 6a, up to 30m). These power savings can add-up in To R, mid-row & end-of-row switch connectivity.\n\n It&153;s the alternative compared with standard SFP+ SR/LR fibre optics, which uses standard-based technology with the familiar RJ45 connector & provides backward compatibility with legacy networks.\n\n\n\n\n\n Product Model: DEM-410T\n\n\n ...
Available
£287.15
The 10GBASE-T SFP+ transceiver module delivers the flexibility & port density well known to the SFP+ form-factor, utilising Cat 6a UTP structured cabling for network connectivity. It is a power-optimised solution for lengths up to 30m, engineered to deliver a minimum power saving of at least 0.5W per port compared to an equivalent embedded 10GBASE-T RJ45 for the same length (Cat 6a, up to 30m). These power savings can add-up in To R, mid-row & end-of-row switch connectivity.\n\n It&153;s the alternative compared with standard SFP+ SR/LR fibre optics, which uses standard-based technology with the familiar RJ45 connector & provides backward compatibility with legacy networks.\n\n\n\n\n\n Product Model: DEM-410T\n\n\n ...
Available
£196.60
49884 Feature Feature Value SFP transceiver type Fiber optic Maximum data transfer rate 10000 Mbit/s Interface type SFP+ Multi-mode fiber (MMF) supported Y Fiber optic connector LCFiber cable diameters supported (core/cladding)50/125, 62.5/125 &181;m Maximum transfer distance 300 m Wavelength 850 nm Tx power (min)-6.5 d Bm W Tx power (max)-1 d Bm W Rx power (min)-11.1 d Bm W Rx power (max)-1 d Bm W Networking standards IEEE 802.3ae Ro HS compliance Y Safety UL, TUV, CDRHCertification CE, FCC, VCCI, C-Tick Maximum voltage 3.3 VMaximum current 300 AOperating temperature (T-T)0
- 70 &176;CStorage temperature (T-T)-40
- 85 &176;COperating relative humidity (H-H)5
- 85% Storage relative humidity (H-H)5
- 95% Width 14.8 mm Depth 11.8 mm Height 56.5 mm Weight 18 g



...
Available
£400.10
49887 Feature Feature Value SFP transceiver type Fiber optic Maximum data transfer rate 10000 Mbit/s Interface type SFP+ Single-mode fiber (SMF) supported Y Fiber optic connector LCFiber cable diameters supported (core/cladding)9/125 &181;m Maximum transfer distance 10000 m Wavelength 1310 nm Tx power (min)-8.5 d Bm W Tx power (max)0.5 d Bm W Rx power (min)-12.6 d Bm W Rx power (max)0.5 d Bm W Networking standards IEEE 802.3ae Ro HS compliance Y Safety UL, TUV, CDRHCertification CE, FCC, VCCIMaximum voltage 3.3 VMaximum current 300 AOperating temperature (T-T)0
- 70 &176;CStorage temperature (T-T)-40
- 85 &176;COperating relative humidity (H-H)5
- 85% Storage relative humidity (H-H)5
- 95% Width 14.8 mm Depth 11.8 mm Height 56.5 mm Weight 19.5 g



...
Available
£243.45
D-Link&153;s 40G QSFP+ Module series are hot-swappable QSFP+ transceivers that plug into QSFP+ slots on switches & support 40G Ethernet. The D-Link 40GBASE QSFP+ Module Series transceivers offer customers a wide variety of 40G Ethernet connectivity options for data centers, enterprise wiring closets, & service provider transport applications.\n\n Quad Small Form-factor Pluggable Plus Format \n The transceivers use the Quad Small Form-factor Pluggable Plus format (QSFP+) connectors, which integrate four transmitting & four receiving channels. QSFP+ supports up to 10.5 Gb/s per channel for applications such as 40G Ethernet.\n\n Hot Pluggable\n All D-Link transceivers are hot pluggable. You can connect atransceiver while the system is powered on without causing any issues, & easily swap one for another without having to reboot the switch each time. This permits modules to be added or removed without interrupting the network, facilitating maintenance & greatly reducing downtime.\n\n 40G Ethernet speeds\n The transceivers all support 40G Ethernet, which results in very fast data transmissions of up to 40 Gbit/s. This is 40 times faster than Gigabit Ethernet & enables the switch to handle faster & higher data transmissions, making it very suitable for business needs.\n\n Digital Diagnostics Monitoring (DDM)\n All 40G QSFP+ modules feature DDM real time monitoring of critical parameters, including transmitted & received power, temperature, & voltage. This allows for convenient monitoring of the module&153;s fiber connection & ensures that network connection issues are detected early.\n\n\n\n\n\n\n\n Model: DEM-QX01Q-SR4\n\n\n\n\n\n\n\n ...
Available
£10.33
D-Link switches are economical to own, simple to operate, & flexible for use in a variety of applications. They present effective, affordable & easy-to-implement solutions to meet demands for higher network loads & quicker response time in small workgroups or medium-sized departments. Blazing speed & raw power are what you get from top-of-the-line DES-1008 switches. Ultimate 10BASE-T/100BASE-TX flexibility is achieved through a series of NWay ports, & in full duplex mode, any workstation in your network can receive 20 Mbps or 200 Mbps of data from any port. Complies with IEEE 802.3 & IEEE802.3u Standards. 8 NWay 10M/100M auto-detect Ethernet/ Fast Ethernet ports. Full/ Half duplex for each port. Operating at maximum packet filtering & forwarding rate. ...
Available
£9.45
D-Link switches are economical to own, simple to operate, & flexible for use in a variety of applications. They present effective, affordable & easy-to-implement solutions to meet demands for higher network loads & quicker response time in small workgroups or medium-sized departments.\n\n Blazing speed & raw power are what you get from top-of-the-line DES-1008 switches. Ultimate 10BASE-T/100BASE-TX flexibility is achieved through a series of NWay ports, & in full duplex mode, any workstation in your network can receive 20 Mbps or 200 Mbps of data from any port.\n\n Complies with IEEE 802.3 & IEEE802.3u Standards. \n 8 NWay 10M/100M auto-detect Ethernet/ Fast Ethernet ports. \n Full/ Half duplex for each port. \n Operating at maximum packet filtering & forwarding rate. Feature Feature Value Basic switching RJ-45 Ethernet ports quantity 8 Full duplex YMAC address table 8000 entries Maximum data transfer rate 0.1 Gbit/s Packet buffer memory 0.256 MBData link protocols Ethernet, Fast Ethernet Power consumption (typical)2 WOperating temperature (T-T)0
- 50 &176;CStorage temperature (T-T)-10
- 70 &176;COperating relative humidity (H-H)10
- 90% Data transfer rate 100 Mbit/s Connectivity technology Wired Power requirements DC 7.5V/1AI/O ports 10/100 Mbps x 8


...
Available
£9.45
D-Link switches are economical to own, simple to operate, & flexible for use in a variety of applications. They present effective, affordable & easy-to-implement solutions to meet demands for higher network loads & quicker response time in small workgroups or medium-sized departments.\n\n Blazing speed & raw power are what you get from top-of-the-line DES-1008 switches. Ultimate 10BASE-T/100BASE-TX flexibility is achieved through a series of NWay ports, & in full duplex mode, any workstation in your network can receive 20 Mbps or 200 Mbps of data from any port.\n\n Complies with IEEE 802.3 & IEEE802.3u Standards. \n 8 NWay 10M/100M auto-detect Ethernet/ Fast Ethernet ports. \n Full/ Half duplex for each port. \n Operating at maximum packet filtering & forwarding rate. Feature Feature Value Basic switching RJ-45 Ethernet ports quantity 8 Full duplex YMAC address table 8000 entries Maximum data transfer rate 0.1 Gbit/s Packet buffer memory 0.256 MBData link protocols Ethernet, Fast Ethernet Power consumption (typical)2 WOperating temperature (T-T)0
- 50 &176;CStorage temperature (T-T)-10
- 70 &176;COperating relative humidity (H-H)10
- 90% Data transfer rate 100 Mbit/s Connectivity technology Wired Power requirements DC 7.5V/1AI/O ports 10/100 Mbps x 8


...
Available
£56.88
8-Port Desktop Switch with 4 Power over Ethernet (Po E) ports\n\n The DES-1008P 8-Port switch can convey power to up to four network devices via the usual network cables using Power over Ethernet technology. This provides a cost-effective entry-level solution for users wishing to make the most of their network. The DES-1008P enables users to easily connect & supply power to devices such as wireless Access Points (AP), IP cameras & IP phones via the common network cables.\n\n As a switch, the DES-1008P can be used to share files, music & video across your network or create a multi-player gaming environment. Users can also add multiple computers, printers, Network Attached Storage (NAS) & any other Ethernet device onto a network.\n\n This device runs ultra-quiet, making it ideal for both home & small office use. In addition, it can be wall-mounted to save desktop space.\n\n IEEE 802.3af Power over Ethernet (Po E)\n\n Four out of the eight ports on the DES-1008P support the IEEE 802.3af standard for Power over Ethernet (Po E). Each of these ports can supply up to 15.4W, up to a total Po E budget of 56W, allowing users to attach IEEE 802.3af-compliant devices without requiring an additional power source.\n Networking devices receiving power in this way do not need to be placed within close proximity of a power outlet, allowing greater flexibility for their placement.\n Compliance with IEEE 802.3af also means that when a compliant device is attached, the switch automatically adjusts the power supplied to that device.\n For non-compliant devices, a Po E adapter such as D-Link&153;s DWL-P50 can be used to still allow the switch to be the power source.\n\n Superior performance\n\n The switch is completely unmanaged, so no configuration is required & installation is quick & easy. Support for auto-MDI/MDI-X on all ports eliminates the need for crossover cables for connection to another switch or hub. Auto-negotiation on each port senses the link speed of a network device (either 10 Mbps or 100 Mbps) & intelligently adjusts for compatibility & optimal performance.\n The DES-1008P also features diagnostic LEDs that display status & activity, allowing you to quickly detect & correct problems on the network. With wire-speed filtering & store-&-forward switching, the DES-1008P also maximizes network performance while minimising the transmission of bad network packets. Combining the convenience of Po E, superior performance, & ease of use, the D-Link DES-1008P is the ideal choice for adding Po E devices to either a home or a small business network.\n\n Hassle-free set-up\n\n The DES-1008P is a plug-&-play device requiring no configuration, which makes set-up simple & hassle-free. Feature Feature Value Switch type Unmanaged Basic switching RJ-45 Ethernet ports quantity 8 Basic switching RJ-45 Ethernet ports type Fast Ethernet (10/100) Fast Ethernet (copper) ports quantity 8 Networking standards IEEE 802.3, IEEE 802.3af, IEEE 802.3u, IEEE 802.3x 10G support N Flow control support YMAC address table 1000 entries Switching capacity 1.6 Gbit/s Store-&-forward Y Maximum data transfer rate 1 Gbit/s Packet buffer memory 0.09 MBProduct colour Black LED indicators LAN, Po E, Power Safety LVDCertification FCC, CE, VCCIInput current 1.45 APower consumption (typical)69 WPower over Ethernet (Po E)YPower over Ethernet (Po E) ports quantity 4 Total Power over Ethernet (Po E) budget 52 WOperating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-10
- 70 &176;COperating relative humidity (H-H)10
- 95% Storage relative humidity (H-H)5
- 90% Width 170.2 mm Depth 99.1 mm Height 27.9 mm Weight 454 g Input voltage 48 V



...
Available
£56.88
8-Port Desktop Switch with 4 Power over Ethernet (Po E) ports\n\n The DES-1008P 8-Port switch can convey power to up to four network devices via the usual network cables using Power over Ethernet technology. This provides a cost-effective entry-level solution for users wishing to make the most of their network. The DES-1008P enables users to easily connect & supply power to devices such as wireless Access Points (AP), IP cameras & IP phones via the common network cables.\n\n As a switch, the DES-1008P can be used to share files, music & video across your network or create a multi-player gaming environment. Users can also add multiple computers, printers, Network Attached Storage (NAS) & any other Ethernet device onto a network.\n\n This device runs ultra-quiet, making it ideal for both home & small office use. In addition, it can be wall-mounted to save desktop space.\n\n IEEE 802.3af Power over Ethernet (Po E)\n\n Four out of the eight ports on the DES-1008P support the IEEE 802.3af standard for Power over Ethernet (Po E). Each of these ports can supply up to 15.4W, up to a total Po E budget of 56W, allowing users to attach IEEE 802.3af-compliant devices without requiring an additional power source.\n Networking devices receiving power in this way do not need to be placed within close proximity of a power outlet, allowing greater flexibility for their placement.\n Compliance with IEEE 802.3af also means that when a compliant device is attached, the switch automatically adjusts the power supplied to that device.\n For non-compliant devices, a Po E adapter such as D-Link&153;s DWL-P50 can be used to still allow the switch to be the power source.\n\n Superior performance\n\n The switch is completely unmanaged, so no configuration is required & installation is quick & easy. Support for auto-MDI/MDI-X on all ports eliminates the need for crossover cables for connection to another switch or hub. Auto-negotiation on each port senses the link speed of a network device (either 10 Mbps or 100 Mbps) & intelligently adjusts for compatibility & optimal performance.\n The DES-1008P also features diagnostic LEDs that display status & activity, allowing you to quickly detect & correct problems on the network. With wire-speed filtering & store-&-forward switching, the DES-1008P also maximizes network performance while minimising the transmission of bad network packets. Combining the convenience of Po E, superior performance, & ease of use, the D-Link DES-1008P is the ideal choice for adding Po E devices to either a home or a small business network.\n\n Hassle-free set-up\n\n The DES-1008P is a plug-&-play device requiring no configuration, which makes set-up simple & hassle-free. Feature Feature Value Switch type Unmanaged Basic switching RJ-45 Ethernet ports quantity 8 Basic switching RJ-45 Ethernet ports type Fast Ethernet (10/100) Fast Ethernet (copper) ports quantity 8 Networking standards IEEE 802.3, IEEE 802.3af, IEEE 802.3u, IEEE 802.3x 10G support N Flow control support YMAC address table 1000 entries Switching capacity 1.6 Gbit/s Store-&-forward Y Maximum data transfer rate 1 Gbit/s Packet buffer memory 0.09 MBProduct colour Black LED indicators LAN, Po E, Power Safety LVDCertification FCC, CE, VCCIInput current 1.45 APower consumption (typical)69 WPower over Ethernet (Po E)YPower over Ethernet (Po E) ports quantity 4 Total Power over Ethernet (Po E) budget 52 WOperating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-10
- 70 &176;COperating relative humidity (H-H)10
- 95% Storage relative humidity (H-H)5
- 90% Width 170.2 mm Depth 99.1 mm Height 27.9 mm Weight 454 g Input voltage 48 V



...
Available

D-Link DEM-QX10Q-LR4 Network Transceiver Module Fiber Optic 40000
Mbit/s QSFP+ 1331 Nm

D-Link&153;s 40G QSFP+ Module series are hot-swappable QSFP+ transceivers that plug into QSFP+ slots on switches and support 40G Ethernet. The D-Link 40GBASE QSFP+ Module Series transceivers offer customers a wide variety of 40G Ethernet connectivity options for data centers, enterprise wiring closets, and service provider transport applications.\n\nQuad Small Form-factor Pluggable Plus Format\nThe transceivers use the Quad Small Form-factor Pluggable Plus format (QSFP+) connectors, which integrate four transmitting and four receiving channels. QSFP+ supports up to 10.5 Gb/s per channel for applications such as 40G Ethernet.\n\nHot Pluggable\nAll D-Link transceivers are hot pluggable. You can connect atransceiver while the system is powered on without causing any issues, and easily swap
one for another without having to reboot the switch each time. This permits modules to be added or removed without interrupting the network, facilitating maintenance and greatly reducing downtime.\n\n40G Ethernet speeds\nThe transceivers all support 40G Ethernet, which results in very fast data transmissions of up to 40 Gbit/s. This is 40 times faster than Gigabit Ethernet and enables the switch to handle faster and higher data transmissions, making it very suitable for business needs.\n\nDigital Diagnostics Monitoring (DDM)\nAll 40G QSFP+ modules feature DDM real time monitoring of critical parameters, including transmitted and received power, temperature, and voltage. This allows for convenient monitoring of the module&153;s fiber connection and ensures that network connection
issues are detected early.\n\n\n\n\n\n\n\nModel: DEM-QX10Q-LR4\n\n\n\n\n\n\n\n
Availability: In Stock
£1582.47

Product Description

D-Link&153;s 40G QSFP+ Module series are hot-swappable QSFP+ transceivers that plug into QSFP+ slots on switches & support 40G Ethernet. The D-Link 40GBASE QSFP+ Module Series transceivers offer customers a wide variety of 40G Ethernet connectivity options for data centers, enterprise wiring closets, & service provider transport applications.\n\n Quad Small Form-factor Pluggable Plus Format\n The transceivers use the Quad Small Form-factor Pluggable Plus format (QSFP+) connectors, which integrate four transmitting & four receiving channels. QSFP+ supports up to 10.5 Gb/s per channel for applications such as 40G Ethernet.\n\n Hot Pluggable\n All D-Link transceivers are hot pluggable. You can connect atransceiver while the system is powered on without causing any issues, & easily swap one for another without having to reboot the switch each time. This permits modules to be added or removed without interrupting the network, facilitating maintenance & greatly reducing downtime.\n\n 40G Ethernet speeds\n The transceivers all support 40G Ethernet, which results in very fast data transmissions of up to 40 Gbit/s. This is 40 times faster than Gigabit Ethernet & enables the switch to handle faster & higher data transmissions, making it very suitable for business needs.\n\n Digital Diagnostics Monitoring (DDM)\n All 40G QSFP+ modules feature DDM real time monitoring of critical parameters, including transmitted & received power, temperature, & voltage. This allows for convenient monitoring of the module&153;s fiber connection & ensures that network connection issues are detected early.\n\n\n\n\n\n\n\n Model: DEM-QX10Q-LR4\n\n\n\n\n\n\n\n

Reviews/Comments

Add New

Price History

Oooops!
We couldn't find any historical pricing!

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

hot - An indication of the temperature being high and a sensation of heat to the tough
Gigabit Ethernet - Also known as GbE or 1 GigE, a network standard which transfers date at one gigabit per second.
Fiber - Also known as fibre is a class of material similar to a length of thread. Fiber Optics are used in computer communications. Natural fibers are used in clothing maufacturer and many other applications.
Network - A link and communication between things. Often computers or people.
Small - something that takes up less space than normal.
Quad - Multiple items, meaning four
Wide - Something with a large width.
Voltage - A measurement of volts.
Feature - An attribute that makes something stand out.
Slots - A narrow opening which something can be inserted into, or a machine commonly found in casinos to win money and tokens.
Transport - Something that carries people or goods.
Convenient - Something that suits and fits well to other activities.

Supplier Information

Transparent Communications
We are a provider of IT and networking equipment at competitive prices with friendly and knowledgeable customer service. Our products include PCs, laptops, tablets, routers, network storage and CCTV, including top brands such as HP, Cisco and Apple.
Page Updated: 2022-11-11 12:11:34

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu