More From Contributor

£211.94
\n Cisco WS-C2960L-8TS-LL network switch Managed L2 Gigabit Ethernet (10/100/1000) Grey 1U\n \n \n \n \n \n \n Manufacturer:\n Cisco\n \n \n Category:\n Networking\n \n \n Sub-Category:\n Network Switches\n \n \n SKU:\n WS-C2960L-8TS-LL\n \n \n EAN:\n 0882658965135 5057454528319\n \n \n \n \n\n Description\n \n \n Cisco Catalyst&174; 2960-L Series Switches are fixed-configuration, Gigabit Ethernet switches that provide entry-level enterprise-class Layer 2 access for branch offices, conventional workspaces, & out-of-wiring closet applications. Designed for operational simplicity to lower total cost of ownership, they enable secure, & energy-efficient business operations with a range of Cisco IOS&174; Software features.\n\n\n\n- Increase flexibility by extending your LAN beyond the wiring closet in a slim & noiseless body\n\n- Improve experiences by offering enterprise-class switching & Cisco Catalyst quality & support at a great value.\n\n- Reduce operating cost by simplifying management over wire or air, & lowering energy consumption through Cisco Energy Wise&174; technology.\n\n- 8, 16, 24, or 48 Gigabit Ethernet ports with line-rate forwarding.\n \n \n\n Specifications\n \n Management features Multicast support Yes ARP inspection Yes Switch type Managed Quality of Service (Qo S) support Yes MIB support Yes Switch layer L2 Ports & interfaces Copper ethernet cabling technology 10BASE-T, 100BASE-TX, 1000BASE-TBasic switching RJ-45 Ethernet ports quantity 8 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000) Installed SFP modules quantity 2 Console port RJ-45 Networking IGMP snooping Yes Copper ethernet cabling technology 10BASE-T, 100BASE-TX, 1000BASE-TNetworking standards IEEE 802.1D, IEEE 802.1ab, IEEE 802.1af, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z Full duplex Yes VLAN support Yes Spanning tree protocol Yes Number of VLANs 4094 Broadcast storm control Yes Auto MDI/MDI-XYes Virtual LAN features Private VLANVirtual LAN features VLAN support Yes Number of VLANs 4094 Virtual LAN features Private VLANData transmission Number of VLANs 4094MAC address table 8000 entries Switching capacity 20 Gbit/s Jumbo frames support Yes Technical details Form factor 1UProduct colour Grey Processor frequency 800 MHz Mean time between failures (MTBF)2448133 h Rack mounting Yes Built-in processor Yes Security SSH/SSL support Yes Security algorithms SNMP, SSHIGMP snooping Yes Access Control List (ACL) Yes DHCP features DHCP server, DHCP client Multicast features Multicast support Yes Protocols Management protocols SNMPv 3, Telnet, RMONCertificates Safety UL 60950-1 Second Edition, CAN/CSA-C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, AS/NZS 60950-1 Electromagnetic compatibility 47CFR Part 15 (CFR 47) Class A, AS/NZS CISPR22 Class A, CISPR22 Class A, EN55022 Class A, ICES003 Class A, VCCI Class A, EN61000-3-2, EN61000-3-3, KN22 Class A, CNS13438 Class AMemory Internal memory 512 MBFlash memory 256 MBDesign Safety UL 60950-1 Second Edition, CAN/CSA-C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, AS/NZS 60950-1 Form factor 1UProduct colour Grey LED indicators Activity, Link, Po E, Speed, System Electromagnetic compatibility 47CFR Part 15 (CFR 47) Class A, AS/NZS CISPR22 Class A, CISPR22 Class A, EN55022 Class A, ICES003 Class A, VCCI Class A, EN61000-3-2, EN61000-3-3, KN22 Class A, CNS13438 Class ARack mounting Yes Performance Processor frequency 800 MHz Mean time between failures (MTBF)2448133 h Internal memory 512 MBFlash memory 256 MBBuilt-in processor Yes Indication LED indicators Activity, Link, Po E, Speed, System Power AC input voltage 110
- 240 VAC input frequency 50
- 60 Hz Power consumption (typical)14.9 WInput current 0.22 AOperational conditions Storage temperature (T-T)-25
- 70 &176;CStorage relative humidity (H-H)5
- 95% Operating temperature (T-T)-5
- 40 &176;COperating relative humidity (H-H)5
- 90% Operating altitude 0
- 3000 m Non-operating altitude 0
- 4500 m Weight & dimensions Width 268 mm Depth 215 mm Height 44 mm Weight 2.02 kg\n \n \n\n\n\n\n\n







...
Available
£211.94
\n Cisco WS-C2960L-8TS-LL network switch Managed L2 Gigabit Ethernet (10/100/1000) Grey 1U\n \n \n \n \n \n \n Manufacturer:\n Cisco\n \n \n Category:\n Networking\n \n \n Sub-Category:\n Network Switches\n \n \n SKU:\n WS-C2960L-8TS-LL\n \n \n EAN:\n 0882658965135 5057454528319\n \n \n \n \n\n Description\n \n \n Cisco Catalyst&174; 2960-L Series Switches are fixed-configuration, Gigabit Ethernet switches that provide entry-level enterprise-class Layer 2 access for branch offices, conventional workspaces, & out-of-wiring closet applications. Designed for operational simplicity to lower total cost of ownership, they enable secure, & energy-efficient business operations with a range of Cisco IOS&174; Software features.\n\n\n\n- Increase flexibility by extending your LAN beyond the wiring closet in a slim & noiseless body\n\n- Improve experiences by offering enterprise-class switching & Cisco Catalyst quality & support at a great value.\n\n- Reduce operating cost by simplifying management over wire or air, & lowering energy consumption through Cisco Energy Wise&174; technology.\n\n- 8, 16, 24, or 48 Gigabit Ethernet ports with line-rate forwarding.\n \n \n\n Specifications\n \n Management features Multicast support Yes ARP inspection Yes Switch type Managed Quality of Service (Qo S) support Yes MIB support Yes Switch layer L2 Ports & interfaces Copper ethernet cabling technology 10BASE-T, 100BASE-TX, 1000BASE-TBasic switching RJ-45 Ethernet ports quantity 8 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000) Installed SFP modules quantity 2 Console port RJ-45 Networking IGMP snooping Yes Copper ethernet cabling technology 10BASE-T, 100BASE-TX, 1000BASE-TNetworking standards IEEE 802.1D, IEEE 802.1ab, IEEE 802.1af, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z Full duplex Yes VLAN support Yes Spanning tree protocol Yes Number of VLANs 4094 Broadcast storm control Yes Auto MDI/MDI-XYes Virtual LAN features Private VLANVirtual LAN features VLAN support Yes Number of VLANs 4094 Virtual LAN features Private VLANData transmission Number of VLANs 4094MAC address table 8000 entries Switching capacity 20 Gbit/s Jumbo frames support Yes Technical details Form factor 1UProduct colour Grey Processor frequency 800 MHz Mean time between failures (MTBF)2448133 h Rack mounting Yes Built-in processor Yes Security SSH/SSL support Yes Security algorithms SNMP, SSHIGMP snooping Yes Access Control List (ACL) Yes DHCP features DHCP server, DHCP client Multicast features Multicast support Yes Protocols Management protocols SNMPv 3, Telnet, RMONCertificates Safety UL 60950-1 Second Edition, CAN/CSA-C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, AS/NZS 60950-1 Electromagnetic compatibility 47CFR Part 15 (CFR 47) Class A, AS/NZS CISPR22 Class A, CISPR22 Class A, EN55022 Class A, ICES003 Class A, VCCI Class A, EN61000-3-2, EN61000-3-3, KN22 Class A, CNS13438 Class AMemory Internal memory 512 MBFlash memory 256 MBDesign Safety UL 60950-1 Second Edition, CAN/CSA-C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, AS/NZS 60950-1 Form factor 1UProduct colour Grey LED indicators Activity, Link, Po E, Speed, System Electromagnetic compatibility 47CFR Part 15 (CFR 47) Class A, AS/NZS CISPR22 Class A, CISPR22 Class A, EN55022 Class A, ICES003 Class A, VCCI Class A, EN61000-3-2, EN61000-3-3, KN22 Class A, CNS13438 Class ARack mounting Yes Performance Processor frequency 800 MHz Mean time between failures (MTBF)2448133 h Internal memory 512 MBFlash memory 256 MBBuilt-in processor Yes Indication LED indicators Activity, Link, Po E, Speed, System Power AC input voltage 110
- 240 VAC input frequency 50
- 60 Hz Power consumption (typical)14.9 WInput current 0.22 AOperational conditions Storage temperature (T-T)-25
- 70 &176;CStorage relative humidity (H-H)5
- 95% Operating temperature (T-T)-5
- 40 &176;COperating relative humidity (H-H)5
- 90% Operating altitude 0
- 3000 m Non-operating altitude 0
- 4500 m Weight & dimensions Width 268 mm Depth 215 mm Height 44 mm Weight 2.02 kg\n \n \n\n\n\n\n\n







...
Available
£913.73
- Cisco Flex Stack: A hot swappable module provides true stacking with all switches in a stack acting as a single unit;
- Po E:
...
Archived Product
£1574.42
- Cisco Flex Stack: A hot swappable module provides true stacking with all switches in a stack acting as a single unit;
- Po E:
...
Archived Product
£1331.95
- Cisco Flex Stack: A hot swappable module provides true stacking with all switches in a stack acting as a single unit;
- Po E:
...
Archived Product
£2529.11
The Cisco Catalyst 3560 v 2 Series is the next-generation energy-efficient Layer 3 fast Ethernet switches. This new series of switches supports Cisco Energy Wise technology, which enables companies to measure & manage power consumption of network infrastructure & network-attached devices, thereby reducing their energy costs & their carbon footprint. The Cisco Catalyst 3560 v 2 Series consumes less power than its predecessors & is the ideal access layer switch for enterprise, retail, & branch-office environments, as it maximizes productivity & investment protection by enabling a unified network for data, voice, & video. Cisco Catalyst 3560 v 2 Series Highlights -Lower power consumption than its predecessors. -Backward compatible
- uses the same Cisco IOS Software image as the 3560 series & has the same feature set. -Full Energy Wise support to monitor energy consumption of network infrastructure & implement energy saving programs to reduce energy costs. -Compatible with Cisco Redundant Power System (RPS) 2300. -All units have a uniform depth of 11.9 inches for better cable management. -Preconfigurable with the Cisco IOS Software release at the time of ordering. -IPv 6 routing included in the IP Services feature set. -DC powered st&-alone model. Cisco Catalyst 3560 v 2 Series Software The Cisco Catalyst 3560 v 2 Series can be purchased with the IP Base or IP Services licenses preinstalled. The IP Base license offers advanced Qo S, rate limiting, ACLs, & basic static & Routing Information Protocol (RIP) routing functions. The IP Services license provides a richer set of enterprise-class features, including advanced hardware-based IP unicast & IP Multicast routing as well as policy-based routing (PBR). The Advanced IP Services license, which

Includes::
IPv 6 routing & IPv 6 ACL support, is now included in the IP Services license. Upgrade licenses are available to upgrade a switch from the IP Base license to the IP Services license. Configurable Cisco IOS Software The Cisco Catalyst 3560 v 2 Series can be preconfigured with a specific Cisco IOS Software release at the time of ordering. This option eliminates the need to reload a specific Cisco IOS Software release during deployment, thereby reducing deployment time & cost. The Cisco IOS Software release to be preloaded can be selected from a list of supported Cisco IOS Software releases, including the crypto version. Cisco Energy Wise The Cisco Catalyst 3560 v 2 series support Cisco Energy Wise, which is a technology that enables monitoring, reporting, & management of energy consumption by end devices that are Cisco Energy Wise enabled. This technology enables companies to reduce their energy cost & carbon footprint. These are some of the Energy Wise features available: -Discover all Cisco Energy Wise enabled devices on the network. -Monitor & report power consumption by these devices. -Implement business rules to control power to these end devices. Power over Ethernet The Cisco Catalyst 3560 v 2 Series can provide a lower total cost of ownership (TCO) for deployments that incorporate Cisco IP phones, Cisco Aironet wireless LAN (WLAN) access points, or any IEEE 802.3af-compliant end device. Po E eliminates the need for wall power outlets for each Po E-enabled device & significantly reduces the cost for additional electrical cabling that would otherwise be necessary in IP phone & WLAN deployments. The Cisco Catalyst 3560 v 2 24-port Po E switch can support Class 3 Po E or 15.4W of Po E power on all 24 ports. Taking advantage of Cisco Catalyst Intelligent Power Management, the Cisco Catalyst 3560 v 2 48-port Po E configurations can deliver the necessary power to support 24 ports at 15.4W, 48 ports at 7.7W, or any combination in between. Maximum power availability for a converged voice & data network is attainable when a Cisco Catalyst 3560 v 2 series switch is combined with the Cisco Redundant Power System 2300 (RPS 2300) for protection against internal power supply failures & an uninterruptible power supply (UPS) system to safeguard against power outages. Redundant Power System The Cisco Catalyst 3560 v 2 Series access switches support the new generation of Cisco RPS 2300, which increases availability in a converged data, voice, & video network by providing transparent power backup to two of six attached Cisco Catalyst 3560 v 2 Series Switches at the same time. The Cisco Catalyst 3560 v 2 Series switches are capable of reverting back to their internal power supply without any service interruption. In addition, the RPS 2300 can be managed via a Cisco Catalyst 3560 v 2 Series switch that is connected to the RPS 2300.


...
Archived Product
£1243.92
The Cisco Catalyst 3560 v 2 Series is the next-generation energy-efficient Layer 3 fast Ethernet switches. This new series of switches supports Cisco Energy Wise technology, which enables companies to measure & manage power consumption of network infrastructure & network-attached devices, thereby reducing their energy costs & their carbon footprint. The Cisco Catalyst 3560 v 2 Series consumes less power than its predecessors & is the ideal access layer switch for enterprise, retail, & branch-office environments, as it maximizes productivity & investment protection by enabling a unified network for data, voice, & video. Cisco Catalyst 3560 v 2 Series Highlights -Lower power consumption than its predecessors. -Backward compatible
- uses the same Cisco IOS Software image as the 3560 series & has the same feature set. -Full Energy Wise support to monitor energy consumption of network infrastructure & implement energy saving programs to reduce energy costs. -Compatible with Cisco Redundant Power System (RPS) 2300. -All units have a uniform depth of 11.9 inches for better cable management. -Preconfigurable with the Cisco IOS Software release at the time of ordering. -IPv 6 routing included in the IP Services feature set. -DC powered st&-alone model. Cisco Catalyst 3560 v 2 Series Software The Cisco Catalyst 3560 v 2 Series can be purchased with the IP Base or IP Services licenses preinstalled. The IP Base license offers advanced Qo S, rate limiting, ACLs, & basic static & Routing Information Protocol (RIP) routing functions. The IP Services license provides a richer set of enterprise-class features, including advanced hardware-based IP unicast & IP Multicast routing as well as policy-based routing (PBR). The Advanced IP Services license, which

Includes::
IPv 6 routing & IPv 6 ACL support, is now included in the IP Services license. Upgrade licenses are available to upgrade a switch from the IP Base license to the IP Services license. Configurable Cisco IOS Software The Cisco Catalyst 3560 v 2 Series can be preconfigured with a specific Cisco IOS Software release at the time of ordering. This option eliminates the need to reload a specific Cisco IOS Software release during deployment, thereby reducing deployment time & cost. The Cisco IOS Software release to be preloaded can be selected from a list of supported Cisco IOS Software releases, including the crypto version. Cisco Energy Wise The Cisco Catalyst 3560 v 2 series support Cisco Energy Wise, which is a technology that enables monitoring, reporting, & management of energy consumption by end devices that are Cisco Energy Wise enabled. This technology enables companies to reduce their energy cost & carbon footprint. These are some of the Energy Wise features available: -Discover all Cisco Energy Wise enabled devices on the network. -Monitor & report power consumption by these devices. -Implement business rules to control power to these end devices. Power over Ethernet The Cisco Catalyst 3560 v 2 Series can provide a lower total cost of ownership (TCO) for deployments that incorporate Cisco IP phones, Cisco Aironet wireless LAN (WLAN) access points, or any IEEE 802.3af-compliant end device. Po E eliminates the need for wall power outlets for each Po E-enabled device & significantly reduces the cost for additional electrical cabling that would otherwise be necessary in IP phone & WLAN deployments. The Cisco Catalyst 3560 v 2 24-port Po E switch can support Class 3 Po E or 15.4W of Po E power on all 24 ports. Taking advantage of Cisco Catalyst Intelligent Power Management, the Cisco Catalyst 3560 v 2 48-port Po E configurations can deliver the necessary power to support 24 ports at 15.4W, 48 ports at 7.7W, or any combination in between. Maximum power availability for a converged voice & data network is attainable when a Cisco Catalyst 3560 v 2 series switch is combined with the Cisco Redundant Power System 2300 (RPS 2300) for protection against internal power supply failures & an uninterruptible power supply (UPS) system to safeguard against power outages. Redundant Power System The Cisco Catalyst 3560 v 2 Series access switches support the new generation of Cisco RPS 2300, which increases availability in a converged data, voice, & video network by providing transparent power backup to two of six attached Cisco Catalyst 3560 v 2 Series Switches at the same time. The Cisco Catalyst 3560 v 2 Series switches are capable of reverting back to their internal power supply without any service interruption. In addition, the RPS 2300 can be managed via a Cisco Catalyst 3560 v 2 Series switch that is connected to the RPS 2300.


...
Available
£1546.12
The Cisco Catalyst 3560 v 2 Series is the next-generation energy-efficient Layer 3 fast Ethernet switches. This new series of switches supports Cisco Energy Wise technology, which enables companies to measure & manage power consumption of network infrastructure & network-attached devices, thereby reducing their energy costs & their carbon footprint. The Cisco Catalyst 3560 v 2 Series consumes less power than its predecessors & is the ideal access layer switch for enterprise, retail, & branch-office environments, as it maximizes productivity & investment protection by enabling a unified network for data, voice, & video. Cisco Catalyst 3560 v 2 Series Highlights -Lower power consumption than its predecessors. -Backward compatible
- uses the same Cisco IOS Software image as the 3560 series & has the same feature set. -Full Energy Wise support to monitor energy consumption of network infrastructure & implement energy saving programs to reduce energy costs. -Compatible with Cisco Redundant Power System (RPS) 2300. -All units have a uniform depth of 11.9 inches for better cable management. -Preconfigurable with the Cisco IOS Software release at the time of ordering. -IPv 6 routing included in the IP Services feature set. -DC powered st&-alone model. Cisco Catalyst 3560 v 2 Series Software The Cisco Catalyst 3560 v 2 Series can be purchased with the IP Base or IP Services licenses preinstalled. The IP Base license offers advanced Qo S, rate limiting, ACLs, & basic static & Routing Information Protocol (RIP) routing functions. The IP Services license provides a richer set of enterprise-class features, including advanced hardware-based IP unicast & IP Multicast routing as well as policy-based routing (PBR). The Advanced IP Services license, which

Includes::
IPv 6 routing & IPv 6 ACL support, is now included in the IP Services license. Upgrade licenses are available to upgrade a switch from the IP Base license to the IP Services license. Configurable Cisco IOS Software The Cisco Catalyst 3560 v 2 Series can be preconfigured with a specific Cisco IOS Software release at the time of ordering. This option eliminates the need to reload a specific Cisco IOS Software release during deployment, thereby reducing deployment time & cost. The Cisco IOS Software release to be preloaded can be selected from a list of supported Cisco IOS Software releases, including the crypto version. Cisco Energy Wise The Cisco Catalyst 3560 v 2 series support Cisco Energy Wise, which is a technology that enables monitoring, reporting, & management of energy consumption by end devices that are Cisco Energy Wise enabled. This technology enables companies to reduce their energy cost & carbon footprint. These are some of the Energy Wise features available: -Discover all Cisco Energy Wise enabled devices on the network. -Monitor & report power consumption by these devices. -Implement business rules to control power to these end devices. Power over Ethernet The Cisco Catalyst 3560 v 2 Series can provide a lower total cost of ownership (TCO) for deployments that incorporate Cisco IP phones, Cisco Aironet wireless LAN (WLAN) access points, or any IEEE 802.3af-compliant end device. Po E eliminates the need for wall power outlets for each Po E-enabled device & significantly reduces the cost for additional electrical cabling that would otherwise be necessary in IP phone & WLAN deployments. The Cisco Catalyst 3560 v 2 24-port Po E switch can support Class 3 Po E or 15.4W of Po E power on all 24 ports. Taking advantage of Cisco Catalyst Intelligent Power Management, the Cisco Catalyst 3560 v 2 48-port Po E configurations can deliver the necessary power to support 24 ports at 15.4W, 48 ports at 7.7W, or any combination in between. Maximum power availability for a converged voice & data network is attainable when a Cisco Catalyst 3560 v 2 series switch is combined with the Cisco Redundant Power System 2300 (RPS 2300) for protection against internal power supply failures & an uninterruptible power supply (UPS) system to safeguard against power outages. Redundant Power System The Cisco Catalyst 3560 v 2 Series access switches support the new generation of Cisco RPS 2300, which increases availability in a converged data, voice, & video network by providing transparent power backup to two of six attached Cisco Catalyst 3560 v 2 Series Switches at the same time. The Cisco Catalyst 3560 v 2 Series switches are capable of reverting back to their internal power supply without any service interruption. In addition, the RPS 2300 can be managed via a Cisco Catalyst 3560 v 2 Series switch that is connected to the RPS 2300.


...
Archived Product
£990.21
The Cisco Catalyst 3560 v 2 Series is the next-generation energy-efficient Layer 3 fast Ethernet switches. This new series of switches supports Cisco Energy Wise technology, which enables companies to measure & manage power consumption of network infrastructure & network-attached devices, thereby reducing their energy costs & their carbon footprint. The Cisco Catalyst 3560 v 2 Series consumes less power than its predecessors & is the ideal access layer switch for enterprise, retail, & branch-office environments, as it maximizes productivity & investment protection by enabling a unified network for data, voice, & video. Cisco Catalyst 3560 v 2 Series Highlights -Lower power consumption than its predecessors. -Backward compatible
- uses the same Cisco IOS Software image as the 3560 series & has the same feature set. -Full Energy Wise support to monitor energy consumption of network infrastructure & implement energy saving programs to reduce energy costs. -Compatible with Cisco Redundant Power System (RPS) 2300. -All units have a uniform depth of 11.9 inches for better cable management. -Preconfigurable with the Cisco IOS Software release at the time of ordering. -IPv 6 routing included in the IP Services feature set. -DC powered st&-alone model. Cisco Catalyst 3560 v 2 Series Software The Cisco Catalyst 3560 v 2 Series can be purchased with the IP Base or IP Services licenses preinstalled. The IP Base license offers advanced Qo S, rate limiting, ACLs, & basic static & Routing Information Protocol (RIP) routing functions. The IP Services license provides a richer set of enterprise-class features, including advanced hardware-based IP unicast & IP Multicast routing as well as policy-based routing (PBR). The Advanced IP Services license, which

Includes::
IPv 6 routing & IPv 6 ACL support, is now included in the IP Services license. Upgrade licenses are available to upgrade a switch from the IP Base license to the IP Services license. Configurable Cisco IOS Software The Cisco Catalyst 3560 v 2 Series can be preconfigured with a specific Cisco IOS Software release at the time of ordering. This option eliminates the need to reload a specific Cisco IOS Software release during deployment, thereby reducing deployment time & cost. The Cisco IOS Software release to be preloaded can be selected from a list of supported Cisco IOS Software releases, including the crypto version. Cisco Energy Wise The Cisco Catalyst 3560 v 2 series support Cisco Energy Wise, which is a technology that enables monitoring, reporting, & management of energy consumption by end devices that are Cisco Energy Wise enabled. This technology enables companies to reduce their energy cost & carbon footprint. These are some of the Energy Wise features available: -Discover all Cisco Energy Wise enabled devices on the network. -Monitor & report power consumption by these devices. -Implement business rules to control power to these end devices. Power over Ethernet The Cisco Catalyst 3560 v 2 Series can provide a lower total cost of ownership (TCO) for deployments that incorporate Cisco IP phones, Cisco Aironet wireless LAN (WLAN) access points, or any IEEE 802.3af-compliant end device. Po E eliminates the need for wall power outlets for each Po E-enabled device & significantly reduces the cost for additional electrical cabling that would otherwise be necessary in IP phone & WLAN deployments. The Cisco Catalyst 3560 v 2 24-port Po E switch can support Class 3 Po E or 15.4W of Po E power on all 24 ports. Taking advantage of Cisco Catalyst Intelligent Power Management, the Cisco Catalyst 3560 v 2 48-port Po E configurations can deliver the necessary power to support 24 ports at 15.4W, 48 ports at 7.7W, or any combination in between. Maximum power availability for a converged voice & data network is attainable when a Cisco Catalyst 3560 v 2 series switch is combined with the Cisco Redundant Power System 2300 (RPS 2300) for protection against internal power supply failures & an uninterruptible power supply (UPS) system to safeguard against power outages. Redundant Power System The Cisco Catalyst 3560 v 2 Series access switches support the new generation of Cisco RPS 2300, which increases availability in a converged data, voice, & video network by providing transparent power backup to two of six attached Cisco Catalyst 3560 v 2 Series Switches at the same time. The Cisco Catalyst 3560 v 2 Series switches are capable of reverting back to their internal power supply without any service interruption. In addition, the RPS 2300 can be managed via a Cisco Catalyst 3560 v 2 Series switch that is connected to the RPS 2300.


...
Archived Product
£1228.99
The Cisco Catalyst 3750 v 2 Series Switches are next-generation energy-efficient Layer 3 Fast Ethernet stackable switches. This new series of switches supports Cisco Energy Wise technology, which enables companies to measure & manage power consumption of network infrastructure & network-attached devices, thereby reducing their energy costs & their carbon footprints. The Cisco Catalyst 3750 v 2 Series consumes less power than its predecessors & is the ideal access layer for enterprise, retail, & branch-office environments, as it increases productivity & investment protection by enabling a unified network for data, voice, & video. Cisco Catalyst 3750 v 2 Series Highlights -Lower power consumption than its predecessors. -Backward compatible with Cisco Catalyst 3750 & 3750-E Series Switches. -Full Energy Wise support to monitor energy consumption of network infrastructure & implement energy saving programs to reduce energy costs. -Compatible with Cisco Redundant Power System (RPS) 2300. -Uniform depth of 11.9 inches on all units for better cable management. -Preconfigurable with a Cisco IOS Software release at the time of ordering. Cisco Stack Wise Technology for Stackable Resiliency Cisco Stack Wise technology is a stacking architecture optimized for Gigabit Ethernet. This technology is designed to respond to additions, deletions, & redeployment while maintaining constant performance. Cisco Stack Wise technology unites up to nine individual switches in a single logical unit, using special stack-interconnect cables & stacking software. The individual switches can be any combination of Cisco Catalyst 3750, 3750 v 2, & 3750-E Series Switches. The stack behaves as a single switching unit that is managed by a master switch, chosen from one of the member switches. The master switch automatically creates & updates all the switching & optional routing tables. A working stack can accept new members or delete old ones without service interruption. Cisco Stack Wise stacking creates a 32-Gbps switch interconnection. Stacking does not require user ports. Up to 9 units can be stacked together for a maximum of 468 10/100 ports. Additional port combinations can be created by stacking together the Cisco Catalyst 3750 v 2, 3750, & 3750-E Series Switches. Cisco Catalyst 3750 v 2 Series Software The Cisco Catalyst 3750 v 2 Series can be purchased with the IP Base or IP Services license preinstalled. The IP Base license offers advanced quality of service (Qo S), rate limiting, access control lists (ACLs), & basic static & Routing Information Protocol (RIP) routing functions. The IP Services license provides a richer set of enterprise-class features, including advanced hardware-based IP unicast & IP multicast routing as well as policy-based routing (PBR). The Advanced IP Services license, which

Includes::
IPv 6 routing & IPv 6 ACL support, is now included in the IP Services license. Upgrade licenses are available to upgrade a switch from the IP Base license to the IP Services license. Configurable Cisco IOS Software The Cisco Catalyst 3750 v 2 Series can be preconfigured with a specific Cisco IOS Software release at the time of ordering. This option eliminates the need to reload a specific Cisco IOS Software release during deployment, thereby reducing deployment time & cost. The Cisco IOS Software release to be preloaded can be selected from a list of supported Cisco IOS Software releases, including the crypto version. Cisco Energy Wise The Cisco Catalyst 3750 v 2 Series supports Cisco Energy Wise, which is a technology that enables monitoring, reporting, & management of energy consumption by end devices that are Energy Wise enabled. This technology enables companies to reduce their energy costs & carbon footprints. Energy Wise features enable you to: -Discover all Cisco Energy Wise enabled devices on the network -Monitor & report power consumption by these devices -Implement business rules to control power to these end devices Power over Ethernet The Cisco Catalyst 3750 v 2 Series can provide a lower total cost of ownership (TCO) for deployments that incorporate Cisco IP Phones, Cisco Aironet wireless LAN (WLAN) access points, or any IEEE 802.3af-compliant end device. Po E eliminates the need for wall power outlets for each Po E-enabled device & significantly reduces the cost for additional electrical cabling that would otherwise be necessary in IP phone & WLAN deployments. The Cisco Catalyst 3750 v 2 24-port Po E switch can support Class 3 Po E or 15.4 watts (W) of Po E power on all 24 ports. Taking advantage of Cisco Catalyst Intelligent Power Management, the Cisco Catalyst 3750 v 2 48-port Po E configurations can deliver the necessary power to support 24 ports at 15.4W, 48 ports at 7.7W, or any combination in between. Maximum power availability for a converged voice & data network is attainable when a Cisco Catalyst 3750 v 2 Series Switch is combined with the Cisco RPS 2300 for protection against internal power supply failures & an uninterruptible power supply (UPS) system to safeguard against power outages. Redundant Power System The Cisco Catalyst 3750 v 2 Series access switches support the new generation of Cisco RPS 2300, which increases availability in a converged data, voice, & video network by providing transparent power backup to two of six attached Cisco Catalyst 3750 v 2 Series Switches at the same time. The Cisco Catalyst 3750 v 2 Series Switches are capable of reverting to their internal power supply without any service interruption. In addition, the Cisco RPS 2300 can be managed by a Cisco Catalyst 3750 v 2 Series Switch that is connected to it. -IPv 6 routing included in the IP Services feature set.

...
Available

Cisco WS-C3560CG-8TC-S Network Switch

Cisco Borderless Networks and Access Switching Borderless Networks, a Cisco next-generation architecture, deliver the new workspace experience, connecting anyone, anywhere, using any device, to any resource - securely, reliably, transparently. The Cisco Borderless Networks architecture addresses primary IT and business challenges to help create a truly borderless experience by bringing interactions closer to the employee and customer. Innovations in switching help organizations deliver ease of operation, green efficiency, security, and performance to accelerate the way IT delivers and scales those services on the network. Figure 2 depicts the Cisco Borderless Network benefits. Cisco Borderless Networks Primary Capabilities - Sustainability: PoE pass-through to provide PoE to
downlink ports using PoE or PoE+ switches in the wiring closet; Cisco EnergyWise to measure, report, and reduce energy usage across the entire organization; - Operational excellence: Cisco Catalyst Smart Operations; - Secure business: Intelligent features at the network edge for sophisticated access control lists (ACLs) and identity services with a wide range of authentication methods, data encryption, and Network Admission Control (NAC)-based technology; - Workspace experience: Network control and bandwidth optimization for granular rate limiting, ACLs, and multicast video services. Advanced, Intelligent Network Management Tools The Cisco Catalyst 3560-C and 2960-C Series Compact Switches offer both the traditional Cisco CLI for detailed configuration and Cisco Network Assistant
software, a PC-based tool for quick configuration based on preset templates. In addition, CiscoWorks LAN Management Solution (LMS) supports the Cisco Catalyst 3560-C and 2960-C Series Compact Switches for networkwide management. CiscoWorks LAN Management Solution CiscoWorks LAN Management Solution (LMS) is a comprehensive network lifecycle management solution. It provides an extensive library of easy-to-use features to automate the initial and day-to-day management of your Cisco network infrastructure. CiscoWorks LMS uniquely uses Cisco hardware and software platform knowledge and operational experience into a powerful set of workflow-driven configuration, monitoring, troubleshooting, reporting, and administrative tools. Including: - Support for new Cisco hardware platforms the day
they ship; - Support for new technologies and services from initial deployment to day-to-day administration and management, such as EnergyWise, Identity, Cisco Auto Smartports, Cisco Smart Install, and much more; - Configuration management tools built from Cisco experience and Cisco Validated Design recommendations; - Monitoring and troubleshooting capabilities that incorporates Cisco hardware best practices and diagnostics features; - Automation in managing hardware inventories, security vulnerabilities (PSIRTS), and platform end-of-life and support cycles.
RIP - This product is no longer available on our network. It was last seen on 11.11.2022

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
Availability: In Stock
£443.78

Product Description

Cisco Borderless Networks & Access Switching Borderless Networks, a Cisco next-generation architecture, deliver the new workspace experience, connecting anyone, anywhere, using any device, to any resource
- securely, reliably, transparently. The Cisco Borderless Networks architecture addresses primary IT & business challenges to help create a truly borderless experience by bringing interactions closer to the employee & customer. Innovations in switching help organizations deliver ease of operation, green efficiency, security, & performance to accelerate the way IT delivers & scales those services on the network. Figure 2 depicts the Cisco Borderless Network benefits. Cisco Borderless Networks Primary Capabilities
- Sustainability: Po E pass-through to provide Po E to downlink ports using Po E or Po E+ switches in the wiring closet; Cisco Energy Wise to measure, report, & reduce energy usage across the entire organization;
- Operational excellence: Cisco Catalyst Smart Operations;
- Secure business: Intelligent features at the network edge for sophisticated access control lists (ACLs) & identity services with a wide range of authentication methods, data encryption, & Network Admission Control (NAC)-based technology;
- Workspace experience: Network control & bandwidth optimization for granular rate limiting, ACLs, & multicast video services. Advanced, Intelligent Network Management Tools The Cisco Catalyst 3560-C & 2960-C Series Compact Switches offer both the traditional Cisco CLI for detailed configuration & Cisco Network Assistant software, a PC-based tool for quick configuration based on preset templates. In addition, Cisco Works LAN Management Solution (LMS) supports the Cisco Catalyst 3560-C & 2960-C Series Compact Switches for networkwide management. Cisco Works LAN Management Solution Cisco Works LAN Management Solution (LMS) is a comprehensive network lifecycle management solution. It provides an extensive library of easy-to-use features to automate the initial & day-to-day management of your Cisco network infrastructure. Cisco Works LMS uniquely uses Cisco hardware & software platform knowledge & operational experience into a powerful set of workflow-driven configuration, monitoring, troubleshooting, reporting, & administrative tools. Including:
- Support for new Cisco hardware platforms the day they ship;
- Support for new technologies & services from initial deployment to day-to-day administration & management, such as Energy Wise, Identity, Cisco Auto Smartports, Cisco Smart Install, & much more;
- Configuration management tools built from Cisco experience & Cisco Validated Design recommendations;
- Monitoring & troubleshooting capabilities that incorporates Cisco hardware best practices & diagnostics features;
- Automation in managing hardware inventories, security vulnerabilities (PSIRTS), & platform end-of-life & support cycles.

Reviews/Comments

Add New

Price History

Oooops!
We couldn't find any historical pricing!

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

LAN - Local Area Network
deliver - The method by which something is delivered fomr one location to another
compact - Carefuly designed to ensure an item has a minimal physical size
PC - Personal Computer - an electronic device for acheiving multiple electronic tasks including word processing, emails and internet access
edge - Enhanced data rates for GSM evolution also known as enhanced GPRS. A mobile phone technology with improved data transmission rates.
edge - The point at which two surfaces meet
Day - The time it takes a planet or other space objects to complete one rotation.
Set - a group of items usually related to one another. Some objects cannot function without the complete set of items.
Quick - Something that is fast
Network - A link and communication between things. Often computers or people.
Compact - something that has a lot combined within a small space.
Traditional - Something that has become the same through a period of time and thus repeated.
Install - A process of putting materials together to create a finished product.
Traditional - Something that has been around for a while and is repeated regularly.
Wide - Something with a large width.
Experience - To gain further knowledge by practising.
Design - A drawing or styles that shows the look and functionality of something before its made.
Sophisticated - Something that is a high level of complexity, can relate to a persons personality.
Primary - the beginning of something, of chief importance.
Performance - When someone is presenting a form of entertainment, also how well someone is doing within a role.

Supplier Information

Transparent Communications
We are a provider of IT and networking equipment at competitive prices with friendly and knowledgeable customer service. Our products include PCs, laptops, tablets, routers, network storage and CCTV, including top brands such as HP, Cisco and Apple.
Page Updated: 2022-11-11 12:11:34

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu