\n Cisco Small Business WS-C2960X-48LPS-L network switch Managed L2/L3 Gigabit Ethernet (10/100/1000) Black 1U Power over Ethernet (Po E)\n \n \n \n \n \n \n Manufacturer:\n Cisco\n \n \n Category:\n Networking\n \n \n Sub-Category:\n Network Switches\n \n \n SKU:\n WS-C2960X-48LPS-L\n \n \n EAN:\n 0882658554384 0801940084583 0804066551588 0044702009275 4053162349117 8826585543846 0806293519843 0578432670523 0809185795806\n \n \n \n \n\n Description\n \n \n Cisco&174; Catalyst&174; 2960-X Series Switches are fixed-configuration, stackable Gigabit Ethernet switches that provide enterprise-class access for campus & branch applications (Figure 1). Designed for operational simplicity to lower total cost of ownership, they enable scalable, secure & energy-efficient business operations with intelligent services & a range of advanced Cisco IOS&174; Software features.\n\n\n\n Product Highlights\n\n\n\n Cisco Catalyst 2960-X switches feature:\n\n\n\n- 24 or 48 Gigabit Ethernet ports with line-rate forwarding performance\n\n- Gigabit Small Form-Factor Pluggable (SFP) or 10G SFP+ uplinks\n\n- Flex Stack Plus for stacking of up to 8 switches with 80 Gbps of stack throughput (optional)\n\n- Power over Ethernet Plus (Po E+) support with up to 740W of Po E budget\n\n- 24-port Po E fanless switch for deployment outside the wiring closet\n\n- Reduced power consumption & advanced energy management features\n\n- USB (Universal Serial Bus) & Ethernet management interfaces for simplified operations\n\n- Application visibility & capacity planning with integrated Net Flow-Lite\n\n- LAN Base or LAN Lite Cisco IOS&174; software features\n\n- Enhanced limited lifetime warranty (E-LLW) offering next-business-day hardware replacement\n\n\n\n Cisco Catalyst 2960-XR models also offer:\n\n\n\n- Power resiliency with optional dual field-replaceable power supplies\n\n- IP Lite Cisco IOS&174; software with dynamic routing & Layer 3 features\n\n\n\n Switch Models & Configurations\n\n\n\n Catalyst 2960-X switches include a single fixed power supply & are available with either the Cisco IOS LAN Base or LAN Lite feature set. Catalyst 2960-XR switch models include a field-replaceable modular power supply & can accommodate a second power supply. Catalyst 2960-XR is available only with the Cisco IOS IP Lite feature set.\n\n\n\n Catalyst 2960-X series Software Features\n\n\n\n All Catalyst 2960-X Series Switches use a single Universal Cisco IOS Software Image for all SKUs. Depending on the switch model, the Cisco IOS image automatically configures the LAN Lite, LAN Base, or IP Lite feature set.\n\n\n\n LAN Lite models have reduced functionality & scalability for small deployments with basic requirements. Cisco Catalyst 2960-X Family of Switches are available with the LAN Base & LAN Lite feature sets & Catalyst 2960-XR Family of switches are available IP Lite feature sets.\n\n\n\n Note that each switch model is tied to a specific feature level; LAN Lite cannot be upgraded to LAN Base & LAN Base cannot be upgraded to IP Lite.\n\n\n\n Cisco Catalyst 2960-XR IP-Lite High-Performance Routing\n\n\n\n The Cisco hardware routing architecture delivers extremely high-performance IP routing in the Cisco Catalyst 2960-XR IP-Lite Switches:\n\n\n\n- IP unicast routing protocols (Static, Routing Information Protocol Version 1 [RIPv 1], RIPv 2, RIPng, & EIGRP-Stub) are supported for network routing applications.\n\n- Advanced IP unicast routing protocols (OSPF for Routed Access) are supported for load balancing & constructing scalable LANs. IPv 6 routing (OSPFv 3) is supported in hardware for maximum performance.\n\n- EIGRPv 3-Stub & PIMv 6-Stub are supported as a part of the IPv 6 routing suite.\n\n- Equal-cost routing facilitates Layer 3 load balancing & redundancy across the stack.\n\n- Policy-based routing (PBR) allows superior control by facilitating flow redirection regardless of the routing protocol configured (for both IPv 4 & IPv 6).\n\n- Hot Standby Routing Protocol (HSRP) & Virtual Router Redundancy Protocol (VRRP) provides dynamic load balancing & failover for routed links.\n\n- Protocol Independent Multicast (PIM) for IP multicast is supported, including PIM sparse mode (PIM-SM), PIM dense mode (PIM-DM), PIM sparse-dense mode & Source Specific Multicast (SSM).\n\n\n\n Network Security\n\n\n\n The Cisco Catalyst 2960-X Series Switches provide a range of security features to limit access to the network & mitigate threats, including:\n\n\n\n- MAC-based VLAN assignment enables different users to authenticate on different VLANs. This feature enables each user to have a different data VLAN on the same interface.\n\n- Cisco Trust Sec uses SXP to simplify security & policy enforcement throughout the network. For more information about Cisco Trust Sec security solutions, visit cisco.com/go/ Trust Sec.\n\n- Comprehensive 802.1X Features to control access to the network, including Flexible Authentication, 802.1x Monitor Mode, & RADIUS Change of Authorization.\n\n- IPv 6 First-Hop Security enhances Layer-2 & Layer-3 network access from proliferating IPv 6 devices especially BYOD devices. It protects against rogue router advertisements, address spoofing, fake DHCP replies & other risks introduced by IPv 6 technology.\n\n- Device Sensor & Device Classifier enable seamless versatile device profiles including BYOD devices. They also enable Cisco Identity Services Engine (ISE) to provision identity based security policies. This feature is available on both the 2960-X & the 2960-XR product families.\n\n- Cisco Trust Anchor Technology enables easy distribution of a single universal image for all models of Catalyst 2960-X by verifying the authenticity of IOS images. This technology allows the switch to perform IOS integrity checks at boot-up by verifying the signature, verifying the Trusted Asset under Management & authenticating the license.\n\n- Cisco Threat Defense features including Port Security, Dynamic ARP Inspection, & IP Source Guard.\n\n- Private VLANs restrict traffic between hosts in a common segment by segregating traffic at Layer 2, turning a broadcast segment into a nonbroadcast multi access like segment. This feature is available in IP-Lite feature set only.\n\n- Private VLAN Edge provides security & isolation between switch ports, which helps ensure that users cannot snoop on other users&153; traffic.\n\n- Unicast Reverse Path Forwarding (u RPF) feature helps mitigate problems caused by the introduction of malformed or forged (spoofed) IP source address into a network by discarding IP packets that lack a verifiable IP source address. This feature is available in IP-Lite feature set only.\n\n- Multidomain Authentication allows an IP phone & a PC to authenticate on the same switch port while placing them on appropriate voice & data VLAN.\n\n- Access Control Lists (ACLs) for IPv 6 & IPv 4 for security & Qo S ACEs.\n\n- VLAN ACLs on all VLANs prevent unauthorized data flows from being bridged within VLANs.\n\n- Router ACLs define security policies on routed interfaces for control-plane & data-plane traffic. IPv 6 ACLs can be applied to filter IPv 6 traffic.\n\n- Port-based ACLs for Layer 2 interfaces allow security policies to be applied on individual switch ports.\n\n- Secure Shell (SSH) Protocol, Kerberos, & Simple Network Management Protocol Version 3 (SNMPv 3) provide network security by encrypting administrator traffic during Telnet & SNMP sessions. SSH Protocol, Kerberos, & the cryptographic version of SNMPv 3 require a special cryptographic software image because of U.S. export restrictions.\n\n- Switched Port Analyzer (SPAN), with bidirectional data support, allows Cisco Intrusion Detection System (IDS) to take action when an intruder is detected.\n\n- TACACS+ & RADIUS authentication facilitates centralized control of the switch & restricts unauthorized users from altering the configuration.\n\n- MAC Address Notification allows administrators to be notified of users added to or removed from the network.\n\n- Multilevel security on console access prevents unauthorized users from altering the switch configuration.\n\n- Bridge protocol data unit (BPDU) Guard shuts down Spanning Tree Port Fast-enabled interfaces when BPDUs are received to avoid accidental topology loops.\n\n- Spanning Tree Root Guard (STRG) prevents edge devices not in the network administrator&153;s control from becoming Spanning Tree Protocol root nodes.\n\n- IGMP filtering provides multicast authentication by filtering out nonsubscribers & limits the number of concurrent multicast streams available per port.\n\n- Dynamic VLAN assignment is supported through implementation of VLAN Membership Policy Server client capability to provide flexibility in assigning ports to VLANs. Dynamic VLAN facilitates the fast assignment of IP addresses.\n\n\n\n Redundancy & Resiliency\n\n\n\n Cisco Catalyst 2960-X Series Switches offer a number of redundancy & resiliency features to prevent outages & help ensure that the network remains available:\n\n\n\n- Cross-stack Ether Channel provides the ability to configure Cisco Ether Channel technology across different members of the stack for high resiliency.\n\n- Flexlink provides link redundancy with convergence time less than 100 milliseconds.\n\n- IEEE 802.1s/w Rapid Spanning Tree Protocol (RSTP) & Multiple Spanning Tree Protocol (MSTP) provide rapid spanning-tree convergence independent of spanning-tree timers & also offer the benefit of Layer 2 load balancing & distributed processing. Stacked units behave as a single spanning-tree node.\n\n- Per-VLAN Rapid Spanning Tree (PVRST+) allows rapid spanning-tree reconvergence on a per-VLAN spanning-tree basis, without requiring the implementation of spanning-tree instances.\n\n- Cisco Hot Standby Router Protocol (HSRP) is supported to create redundant, fail safe routing topologies in 2960-XR IP-Lite SKUs.\n\n- Switch-port auto-recovery (Error Disable) automatically attempts to reactivate a link that is disabled because of a network error.\n\n- Power redundancy with an optional second power supply on 2960-XR models, or with an external RPS on 2960-X models.\n\n\n\n Enhanced Quality of Service\n\n\n\n The Cisco Catalyst 2960-X Series Switches offers intelligent traffic management that keeps everything flowing smoothly. Flexible mechanisms for marking, classification, & scheduling deliver superior performance for data, voice, & video traffic, all at wire speed. Primary Qo S features include:\n\n\n\n- Up to eight egress queues per port & strict priority queuing so that the highest priority packets are serviced ahead of all other traffic.\n\n- Shaped Round Robin (SRR) scheduling & Weighted Tail Drop (WTD) congestion avoidance.\n\n- Flow-based rate limiting & up to 256 aggregate or individual policers per port.\n\n- 802.1p class of service (Co S) & Differentiated Services Code Point (DSCP) classification, with marking & reclassification on a per-packet basis by source & destination IP address, MAC address, or Layer 4 TCP/UDP port number.\n\n- Cross-stack Qo S to allow Qo S to be configured across a stack of 2960-X series switches.\n\n- The Cisco committed information rate (CIR) function provides bandwidth in increments as low as 8 Kbps.\n\n- Rate limiting is provided based on source & destination IP address, source & destination MAC address, Layer 4 TCP/UDP information, or any combination of these fields, using Qo S ACLs (IP ACLs or MAC ACLs), class maps, & policy maps.\n \n \n\n Specifications\n \n Management features Multicast support Yes ARP inspection Yes Switch type Managed Web-based management Yes Quality of Service (Qo S) support Yes MIB support Yes Switch layer L2/L3 Networking IGMP snooping Yes Networking standards IEEE 802.1ab, IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3af, IEEE 802.3ah, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z Full duplex Yes VLAN support Yes Spanning tree protocol Yes Rate limiting Yes Number of VLANs 1023 Link aggregation Yes Broadcast storm control Yes Auto MDI/MDI-XYes 10G support Yes Virtual LAN features VLAN support Yes Number of VLANs 1023 Data transmission Number of multicast groups filtered 1000 Number of VLANs 1023 Jumbo frames 9216 Throughput 107.1 Mpps Number of static routes 1000MAC address table 16000 entries Switching capacity 216 Gbit/s Number of queues 8 Jumbo frames support Yes Performance Stackable Yes Physical stacking (units)8 Processor frequency 600 MHz Noise level 43 d B Memory type DRAMMean time between failures (MTBF)276870 h Internal memory 512 MBFlash memory 128 MBBuilt-in processor Yes Processor model Applied Micro APM8639 Technical details Physical stacking (units)8 Form factor 1UProduct colour Black Stackable Yes Processor frequency 600 MHz Noise level 43 d B Mean time between failures (MTBF)276870 h Rack mounting Yes Built-in processor Yes Ports & interfaces SFP module slots quantity 4 Basic switching RJ-45 Ethernet ports quantity 48 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000) Gigabit Ethernet (copper) ports quantity 48USB 2.0 ports quantity 2 Console port RJ-45 Security Authentication MAC-based authentication, Port-based authentication Access Control List (ACL) rules 3SSH/SSL support Yes Security algorithms 802.1x RADIUS, SNMP, SSHIGMP snooping Yes Access Control List (ACL) Yes DHCP features DHCP server Multicast features Number of multicast groups filtered 1000 Multicast support Yes Protocols Management protocols SNMPv 3 Switching protocols UDP, TCP, RADIUS/TACACS+ Certificates Safety UL 60950-1, CAN/CSA-C22.2 No. 60950-1, EN 60950-1, IEC 60950-1, AS/NZS 60950-1 Certification 47CFR Part 15 (CFR 47)\n AS/NZS CISPR22\n CISPR22\n EN55022\n ICES003\n VCCI\n EN61000-3-2\n EN61000-3-3\n KN22\n CNS13438 Memory Memory type DRAMInternal memory 512 MBFlash memory 128 MBDesign Safety UL 60950-1, CAN/CSA-C22.2 No. 60950-1, EN 60950-1, IEC 60950-1, AS/NZS 60950-1 Form factor 1UProduct colour Black Stackable Yes LED indicators Yes Certification 47CFR Part 15 (CFR 47)\n AS/NZS CISPR22\n CISPR22\n EN55022\n ICES003\n VCCI\n EN61000-3-2\n EN61000-3-3\n KN22\n CNS13438 Rack mounting Yes Indication Power LEDYes LED indicators Yes Power AC input voltage 100
- 240 VAC input frequency 50
- 60 Hz Power consumption (typical)60.9 WRedundant power supply (RPS) support Yes Number of power supply units 1 Input current 5 APower over Ethernet (Po E) Power over Ethernet plus (Po E+) ports quantity 12 Total Power over Ethernet (Po E) budget 370 WPower over Ethernet (Po E) ports quantity 24 Power over Ethernet (Po E) Yes Operational conditions Storage temperature (T-T)-25
- 70 &176;CStorage relative humidity (H-H)10
- 95% Operating temperature (T-T)-5
- 40 &176;COperating relative humidity (H-H)10
- 95% Operating altitude 0
- 3000 m Non-operating altitude 0
- 4000 m Weight & dimensions Width 445 mm Depth 368 mm Height 45 mm Weight 5.8kg Packaging data User guide Yes Cables included ACOther features Power LEDYes Packaging content User guide Yes Cables included AC\n \n \n\n\n\n\n\n