Cisco Catalyst compact switches (Figure 1) easily extend an intelligent, fully managed Cisco Catalyst wired switching infrastructure, including end-to-end IP & Borderless Network services, with a single Ethernet cable or fiber from the wiring closet. These attractive, small form-factor Gigabit & Fast Ethernet switches are ideal for connecting multiple devices on the retail sales floor; in classrooms, hotels, & factories; & for extending wireless LAN networks: wherever space is at a premium & multiple cable runs could be challenging. Cisco Catalyst 2960-C & 3560-C Series Compact Switches highlights:
- Extend a highly secure, intelligent, managed Cisco Catalyst infrastructure with a single Ethernet cable or fiber from the wiring closet;
- Support for advanced security & services, including voice, video, & Cisco Borderless Network services, to remote endpoints;
- Power over Ethernet (Po E) pass-through enables the compact switch to draw power from the wiring closet & pass it to end devices (selected models);
- Attractive, small form factor & fanless operation fit in confined spaces where multiple cable runs could be challenging;
- Easy to deploy, manage & extend the network loop free;
- Enhanced limited lifetime hardware warranty.





...

Cisco pays special attention to its network accessories which are the foundation stone of the whole network system. Cisco cables, adapters & other accessories will never let you down & you can always rely on the superior quality & outstanding reliability. Cisco has a wide range of network cables that will fit even the most extraordinary demands. ...

\n\n\n \n Cisco 3750X Stack networking cable 0.3 m Black\n \n \n \n \n \n \n Manufacturer:\n Cisco\n \n \n Category:\n Computer Cables\n \n \n Sub-Category:\n Networking Cables\n \n \n SKU:\n CAB-SPWR-30CM=\n \n \n EAN:\n 0882658330797 4053162282902 0151903036990 0641508465634 0031112580449 4054318027071 8826583307976 0763615820745 0971471744529 0999992561906\n \n \n \n \n \n Description\n \n \n The Cisco Stack Power cables are thick but flexible, & they carry power as well as a data signal to provide a communications channel among the switches in the power stack. \n\n\n\n Stack Power & XPS cables are keyed & have colored bands on the ends to help you understand what cable plugs into what switch or XPS.\n\n\n\n A Stack Power cable has colors bands on the cable ends, green on one end & yellow on the other end. This cable can be used between Catalyst 3750-X switches & an XPS. Note that the connector with the blue band can only connect into a Catalyst 3750-X switch while the connector with the yellow band can connect to a Catalyst 3750-X or an XPS.\n\n\n\n An XPS cable has a color band on the cable ends as well, red on one end & yellow on the other end. This cable can only be used to connect Catalyst 3750-X or 3560-X switch to an XPS. Note that the connector with the red band can only connect to an XPS while the connector with the green & blue band can connect to Catalyst 3750-X or 3560-X switch.\n\n\n\n The Cisco Catalyst 3750-X Series Switches come with four power supply options & any of them can be used on any switch in a stack & in any combination.\n \n \n \n Specifications\n \n Technical details Cable length 0.3 m I/O ports Stack Power Compatible products Cisco Catalyst 3750-XCable colour Black Features Cable colour Black Connector gender Male/ Male Cable length 0.3 m Packaging data Quantity per pack 1 pc (s) Other features Compatible products Cisco Catalyst 3750-XI/O ports Stack Power Cable colour Black\n \n \n\n \n\n\n\n\n\n ...

The Cisco Unified SIP Phone 3905 is a cost-effective, entry-level IP phone that addresses the need for basic voice communications with common Cisco Unified Communications features in an attractive design that is also budget-friendly. The phone can fill the communication needs of cubicle, retail, classroom, manufacturing floor & hallway, as well as various wall-mounted deployments. The single-line Cisco Unified SIP Phone 3905 supports two calls per line. Fixed keys for redial, transfer, & hold/resume, along with a full-duplex speakerphone & two-line display, which comes standard, deliver a more productive, easier-to-use, & flexible endpoint experience. With its dual-port 10/100 Ethernet switch for network & PC connections, the Cisco Unified SIP Phone 3905 offers IT organizations a cost-effective solution to reduce cabling infrastructure & administration costs at the desktop. The phone is also eco-friendly, taking advantage of reground & recyclable plastics to deliver a more earth-responsible solution. ...

\n Cisco 3905 IP phone Chocolate Wired handset 1 lines\n \n \n \n \n \n \n Manufacturer:\n Cisco\n \n \n Category:\n Telecom & Navigation\n \n \n Sub-Category:\n IP Phones\n \n \n SKU:\n CP-3905=\n \n \n EAN:\n 0882658385216 4053162392274 5052916664291 4054318038206\n \n \n \n \n\n Description\n \n \n The Cisco&174; Unified SIP Phone 3905 is a cost-effective, entry-level IP phone that addresses the need for basic voice communications with common Cisco Unified Communications features in an attractive design that is also budget-friendly. The phone can fill the communication needs of cubicle, retail, classroom, manufacturing floor & hallway, as well as various wall-mounted deployments.\n\n\n\n The single-line Cisco Unified SIP Phone 3905 supports two calls per line. Fixed keys for redial, transfer, & hold/resume, along with a full-duplex speakerphone & two-line display, which comes standard, deliver a more productive, easier-to-use, & flexible endpoint experience. With its dual-port 10/100 Ethernet switch for network & PC connections, the Cisco Unified SIP Phone 3905 offers IT organizations a cost-effective solution to reduce cabling infrastructure & administration costs at the desktop.\n\n\n\n The phone is also eco-friendly, taking advantage of reground & recyclable plastics to deliver a more earth-responsible solution.\n \n \n\n Specifications\n \n Features Handset type Wired handset Wall mountable Yes Volume control Digital Internet connection required Yes Product colour Chocolate Technical details Handset type Wired handset Built-in camera No Volume control Digital Speakerphone Yes Internet connection required Yes Display Display number of lines 2 lines Display number of colours Monochrome Touchscreen No Display resolution 128 x 32 pixels Phone features Lines quantity 1 lines Redialing Yes Conference call Yes Call pick up Yes Call forwarding Yes Audio Voice codecs G.711, G.729 Speakerphone Yes Microphone mute Yes Networking Vo IP protocols SIPNetworking standards IEEE 802.3af Ethernet LAN interface type Fast Ethernet Ethernet LAN data rates 10, 100 Mbit/s Wi-Fi No Ethernet LANYes DHCP client Yes Bluetooth No Ports & interfaces Interface Ethernet Ethernet LAN (RJ-45) ports 1DC-in jack Yes Memory Internal memory 32 MBFlash memory 4 MBCamera Built-in camera No Weight & dimensions Width 150 mm Depth 205 mm Height 53.5 mm Weight 594.3 g Operational conditions Storage temperature (T-T)-10
- 60 &176;COperating temperature (T-T)0
- 40 &176;COperating relative humidity (H-H)10
- 95% Colour Product colour Chocolate Microphone Microphone mute Yes Certificates Safety- UL 60950 Second Edition
- CAN/CSA-C22.2 No. 60950 Second Edition
- EN 60950 Second Edition
- IEC 60950 Second Edition
- AS/NZS 60950
- GB4943 Certification- FCC Part 68 (47CFR) (HAC)\n- Canada-CS-03-HAC\n- Australia AS/ACIF S004, AS/ACIF S040\n- New Zeal&- PTC 220 Draft\n- FCC Part 15 (CFR 47) Class B\n- ICES-003 Class B\n- EN55022 Class B\n- CISPR22 Class B\n- AS/NZS CISPR22 Class B\n- VCCI Class B\n- KN22 Class B\n- CISPR24\n- EN55024\n- EN61000-3-2\n- EN61000-3-3\n- KN 24\n- CE markings per directives 2004/108/EC & 2006/95/ECErgonomics Wall mountable Yes Packaging content Number of handles included 1 pc (s)\n \n \n\n\n\n\n\n







...

The Cisco 3925 Integrated Services Router (ISR) delivers highly secure data, voice, video, & application services to small branch offices. Key features include:
- Modular Services Performance Engine (SPE) 100, which can be upgraded for even higher performance as next-generation WAN environments evolve
- 3 integrated 10, 100, 1000 Ethernet ports with 2 ports capable of RJ-45 or SFP connectivity
- 2 service module slots
- 4 Enhanced High-Speed WAN Interface Card (EHWIC) slots
- 4 onboard digital signal processor (DSP) slots
- 1 Internal Services Module slot
- Dual integrated power supplies
- Fully integrated power distribution to modules supporting 802.3af Power over Ethernet
- A universal IOS image that lets you deploy new IOS services quickly
- Security









...

The Cisco 3945E Integrated Services Router (ISR) delivers highly secure data, voice, video, & application services to large branch offices. Cisco 3945E features include:
- Modular Services Performance Engine (SPE) 250 for even higher performance as WAN environments evolve;
- 4 integrated 10/100/1000 Ethernet ports with 2 SFP ports;
- 4 service module slots;
- 3 Enhanced High-Speed WAN Interface Card slots;
- 3 onboard digital signal processor (DSP) slots. Power
- Dual integrated power supplies;
- Fully integrated power distribution to modules supporting 802.3af Power over Ethernet (Po E)'
- A universal IOS image helps you deploy new IOS services quickly. Security
- Embedded hardware-accelerated VPN encryption for secure connectivity;
- Integrated threat control using Cisco IOS Firewall, Zone-Based Firewall, IPS, & Content Filtering.
- Identity management using authentication, authorization, & accounting (AAA) & public key infrastructure. Unified Communications
- High-density packet voice DSP module, optimized for voice & video support;
- Standards-certified Voice XML browser services;
- Cisco Unified Border Element capabilities for up to 2500 sessions;
- Support for Cisco Unity Express voicemail, Cisco Communications Manager Express, & Survivable Remote Site Telephony.














...

\n Cisco 4-Port T1/E1 Clear Channel High-Speed WAN Interface Card network switch component\n \n \n \n \n \n \n Manufacturer:\n Cisco\n \n \n Category:\n Networking\n \n \n Sub-Category:\n Network Switch Components\n \n \n SKU:\n HWIC-4T1/E1=\n \n \n EAN:\n 0882658110689 4053162323469 8826581106892 4054318209729 0151903050767\n \n \n \n \n\n Description\n \n \n The Cisco&174; 4-Port Clear Channel T1/E1 High-Speed WAN Interface Card provides n x T1/E1 connectivity in a compact form factor & reduces deployment & management costs.\n\n\n\n As more data & voice services are enabled in branch offices, the demand for WAN bandwidth increases accordingly. Multilink Point-to-Point Protocol (PPP) & Multilink Frame Relay enable customers to scale their leased lines from single T1/E1 to multiples of T1/E1, adding bandwidth as their needs increase. The Cisco 4-Port Clear Channel T1/E1 High-Speed WAN Interface Card (HWIC) integrates four T1/E1 ports in a singlewide HWIC to facilitate n x T1/E1 connectivity in a compact form factor. It also expands the scalability of T1/E1 ports on Cisco 3800 Series Integrated Services Routers. You can use the increased port densities for small-scale WAN aggregation in your regional offices.\n\n\n\n With the Cisco 4-Port Clear Channel T1/E1 HWIC with integrated channel service unit & data service unit (CSU/DSU), you can consolidate customer premises equipment (CPE). The modules support balanced & unbalanced E1 connectivity & conform to G.703 & G.704 standards for unframed & framed E1 modes. The module supports both T1 & E1 modes, selectable by software configuration.\n \n \n\n Specifications\n \n Features Internal Yes Safety EN60950LED indicators Yes Technical details Internal Yes LED indicators Yes Compatibility Cisco 2821, \n Cisco 2851, \n Cisco 3825 & 3845. Networking Connectivity technology Wired Performance Compatibility Cisco 2821, \n Cisco 2851, \n Cisco 3825 & 3845. Operational conditions Storage temperature (T-T)-40
- 70 &176;CRelative humidity 5
- 95% Operating temperature (T-T)0
- 40 &176;CWeight & dimensions Weight 90 g Dimensions (Wx Dx H)78.2 x 120.4 x 19.1 mm Certificates Safety EN60950 Software Compatible operating systems IOS 12.4 (11)XW5, 12.4 (20)TPorts & interfaces I/O ports 4x T1/E1 RJ-48\n \n \n\n\n\n\n\n


...

\n Cisco 4-Port T1/E1 Clear Channel High-Speed WAN Interface Card network switch component\n \n \n \n \n \n \n Manufacturer:\n Cisco\n \n \n Category:\n Networking\n \n \n Sub-Category:\n Network Switch Components\n \n \n SKU:\n HWIC-4T1/E1=\n \n \n EAN:\n 0882658110689 4053162323469 8826581106892 4054318209729 0151903050767\n \n \n \n \n\n Description\n \n \n The Cisco&174; 4-Port Clear Channel T1/E1 High-Speed WAN Interface Card provides n x T1/E1 connectivity in a compact form factor & reduces deployment & management costs.\n\n\n\n As more data & voice services are enabled in branch offices, the demand for WAN bandwidth increases accordingly. Multilink Point-to-Point Protocol (PPP) & Multilink Frame Relay enable customers to scale their leased lines from single T1/E1 to multiples of T1/E1, adding bandwidth as their needs increase. The Cisco 4-Port Clear Channel T1/E1 High-Speed WAN Interface Card (HWIC) integrates four T1/E1 ports in a singlewide HWIC to facilitate n x T1/E1 connectivity in a compact form factor. It also expands the scalability of T1/E1 ports on Cisco 3800 Series Integrated Services Routers. You can use the increased port densities for small-scale WAN aggregation in your regional offices.\n\n\n\n With the Cisco 4-Port Clear Channel T1/E1 HWIC with integrated channel service unit & data service unit (CSU/DSU), you can consolidate customer premises equipment (CPE). The modules support balanced & unbalanced E1 connectivity & conform to G.703 & G.704 standards for unframed & framed E1 modes. The module supports both T1 & E1 modes, selectable by software configuration.\n \n \n\n Specifications\n \n Features Internal Yes Safety EN60950LED indicators Yes Technical details Internal Yes LED indicators Yes Compatibility Cisco 2821, \n Cisco 2851, \n Cisco 3825 & 3845. Networking Connectivity technology Wired Performance Compatibility Cisco 2821, \n Cisco 2851, \n Cisco 3825 & 3845. Operational conditions Storage temperature (T-T)-40
- 70 &176;CRelative humidity 5
- 95% Operating temperature (T-T)0
- 40 &176;CWeight & dimensions Weight 90 g Dimensions (Wx Dx H)78.2 x 120.4 x 19.1 mm Certificates Safety EN60950 Software Compatible operating systems IOS 12.4 (11)XW5, 12.4 (20)TPorts & interfaces I/O ports 4x T1/E1 RJ-48\n \n \n\n\n\n\n\n


...

The Cisco Catalyst 3560 v 2 Series is the next-generation energy-efficient Layer 3 fast Ethernet switches. This new series of switches supports Cisco Energy Wise technology, which enables companies to measure & manage power consumption of network infrastructure & network-attached devices, thereby reducing their energy costs & their carbon footprint. The Cisco Catalyst 3560 v 2 Series consumes less power than its predecessors & is the ideal access layer switch for enterprise, retail, & branch-office environments, as it maximizes productivity & investment protection by enabling a unified network for data, voice, & video. Cisco Catalyst 3560 v 2 Series Highlights -Lower power consumption than its predecessors. -Backward compatible
- uses the same Cisco IOS Software image as the 3560 series & has the same feature set. -Full Energy Wise support to monitor energy consumption of network infrastructure & implement energy saving programs to reduce energy costs. -Compatible with Cisco Redundant Power System (RPS) 2300. -All units have a uniform depth of 11.9 inches for better cable management. -Preconfigurable with the Cisco IOS Software release at the time of ordering. -IPv 6 routing included in the IP Services feature set. -DC powered st&-alone model. Cisco Catalyst 3560 v 2 Series Software The Cisco Catalyst 3560 v 2 Series can be purchased with the IP Base or IP Services licenses preinstalled. The IP Base license offers advanced Qo S, rate limiting, ACLs, & basic static & Routing Information Protocol (RIP) routing functions. The IP Services license provides a richer set of enterprise-class features, including advanced hardware-based IP unicast & IP Multicast routing as well as policy-based routing (PBR). The Advanced IP Services license, which

Includes:: IPv 6 routing & IPv 6 ACL support, is now included in the IP Services license. Upgrade licenses are available to upgrade a switch from the IP Base license to the IP Services license. Configurable Cisco IOS Software The Cisco Catalyst 3560 v 2 Series can be preconfigured with a specific Cisco IOS Software release at the time of ordering. This option eliminates the need to reload a specific Cisco IOS Software release during deployment, thereby reducing deployment time & cost. The Cisco IOS Software release to be preloaded can be selected from a list of supported Cisco IOS Software releases, including the crypto version. Cisco Energy Wise The Cisco Catalyst 3560 v 2 series support Cisco Energy Wise, which is a technology that enables monitoring, reporting, & management of energy consumption by end devices that are Cisco Energy Wise enabled. This technology enables companies to reduce their energy cost & carbon footprint. These are some of the Energy Wise features available: -Discover all Cisco Energy Wise enabled devices on the network. -Monitor & report power consumption by these devices. -Implement business rules to control power to these end devices. Power over Ethernet The Cisco Catalyst 3560 v 2 Series can provide a lower total cost of ownership (TCO) for deployments that incorporate Cisco IP phones, Cisco Aironet wireless LAN (WLAN) access points, or any IEEE 802.3af-compliant end device. Po E eliminates the need for wall power outlets for each Po E-enabled device & significantly reduces the cost for additional electrical cabling that would otherwise be necessary in IP phone & WLAN deployments. The Cisco Catalyst 3560 v 2 24-port Po E switch can support Class 3 Po E or 15.4W of Po E power on all 24 ports. Taking advantage of Cisco Catalyst Intelligent Power Management, the Cisco Catalyst 3560 v 2 48-port Po E configurations can deliver the necessary power to support 24 ports at 15.4W, 48 ports at 7.7W, or any combination in between. Maximum power availability for a converged voice & data network is attainable when a Cisco Catalyst 3560 v 2 series switch is combined with the Cisco Redundant Power System 2300 (RPS 2300) for protection against internal power supply failures & an uninterruptible power supply (UPS) system to safeguard against power outages. Redundant Power System The Cisco Catalyst 3560 v 2 Series access switches support the new generation of Cisco RPS 2300, which increases availability in a converged data, voice, & video network by providing transparent power backup to two of six attached Cisco Catalyst 3560 v 2 Series Switches at the same time. The Cisco Catalyst 3560 v 2 Series switches are capable of reverting back to their internal power supply without any service interruption. In addition, the RPS 2300 can be managed via a Cisco Catalyst 3560 v 2 Series switch that is connected to the RPS 2300.


...