The MAC722 adds support for two displays side-by-side to carts & floor stands.\n\n Note: If you have already ordered a universal cart or st&, you only need to order one interface bracket since these stands come with a universal interface bracket. If you do not ordered a universal cart or st&, you will need two interface brackets (one for each sceeen).\n\n- Supports two 39.2-58.8" (99.6
- 149.4 cm) wide displays (must be same size) Feature Feature Value Product type Flat panel mount arm Product colour Black Housing material Metal
...

Chief's FUSION Flat Panel Ceiling Mounts are installer inspired & offer perfect display positioning & flexible adjustments for medium flat panel screens. Great for digital signage installations.\n\n- Ceiling plate & extension column are required & must be ordered separately\n- Compatible with traditional 1.5" NPT & new CPA pinned ceiling plates & column systems\n- See ceiling plates & extension columns (Adjustable & Fixed) for 1.5" NPT compatibility\n- See CPA ceiling plates & CPA columns for pin connection compatibility\n- Stackable on a single pole when used with CPA columns Feature Feature Value Maximum weight capacity 56.7kg Maximum screen size compatibility 127 cm (50") Minimum screen size compatibility 66 cm (26") Number of displays supported 2 Tilt angle range-20
- 5&176; Product colour Black Certification ULWidth 529 mm Depth 259 mm Height 420 mm Package weight 14kg
...

Installer-inspired Fusion tilt mount solves top flat panel installation problems, offering flexible adjustments for medium displays with a low-profile display mounting solution. \n\n This single stud Fusion mount hides better behind smaller narrow bezel displays in the 32-47" range. Many installer-friendly features of Fusion in a smaller form to create superior aesthetic results.\n\n The mount incorporates Fusion favorites like Centris tilt, Control Zone leveling adjustment & Click Connect Latching. \n\n- Centris low-profile tilt uses the center of gravity to balance the screen while maintaining a low profile\n- Tilt can be locked at 0&176;, -6&176; or -12&176;\n- Control Zone leveling allows post-installation fine-tuning of height & leveling\n- Click Connect offers an audible click when the display safely engages with the mount\n- Post-installation lateral positioning\n- Set screws keep the mount rigid, stable & secure throughout the life of the installation\n- Exclusive nesting spacers can be stacked to achieve any depth\n- Quick-Store Cords use magnets to easily store & access pull cords\n- Integrated Security\n- Ships with a custom hardware kit that can be hung from mount rails if installing in stages\n- Easy Open box with less waste to throw away Feature Feature Value Maximum weight capacity 34kg Maximum screen size compatibility 119.4 cm (47") Minimum VESA mount 200 x 200 mm Maximum VESA mount 450 x 400 mm Minimum screen size compatibility 81.3 cm (32") Suitable for Public display Number of displays supported 1 Height adjustment Y Height adjustment range 0
- 25 mm Tilt angle range-12
- 2&176; Product colour Black Certification UL Listed Width 463 mm Depth 51 mm Depth (min)5.1 cm Height 359 mm

...

A lightweight, mobile AV cart with a collapsible design that is perfect for rental & staging to corporate applications.\n\n- Centris Technology provides effortless, fingertip tilt\n- Screen angle stays set in place until you decide to re-adjust\n- Provides telescoping height adjustment without tools\n- Click Connect Technology provides an audible click to confirm that the flat panel is locked in place\n- Offers quick connect/disconnect wtih no tools necessary\n-

Includes:: integrated security with the addition of a padlock\n- Screen can be installed in portrait or landscape orientation (MAC400 accessory can be used to rotate without removing the screen)\n- Integrated cable management with flexible covers to hide cables out of sight for a fast, clean installation\n- Smooth rolling casters for effortless positioning (2 locking casters)\n- Unique, angled base makes corner positioning easy Feature Feature Value Maximum weight capacity 56.7kg Maximum screen size compatibility 165.1 cm (65") Suitable for TVMinimum VESA mount 100 x 100 mm Minimum screen size compatibility 81.3 cm (32") Panel mounting interface 100 x 100 mm Number of displays supported 1 Height adjustment Y Height adjustment range 1219
- 1829 mm Tilt adjustment Y Tilt angle range-15
- 15&176; Wheels Y Number of wheels 4 wheel (s) Cord management Y Type Portable flat panel floor stand Product colour Black Base type H-shaped Certification ULWeight 29kg Width 941 mm Depth 816 mm Height 1977 mm Manual Y Turn angle 15&176;



...

Chief upgraded fixed wall mounts based on installer feedback & direct observations of installers in the field. Many new features join Fusion favorites like Centerless shift & Click Connect Latching.\n\n New benefits included added stability, faster install, enhanced lateral shift, easier cable management & enhanced security.\n\n Installer-inspired Fusion fixed mount solves top flat panel installation problems, offering flexible adjustments for large displays with a low-profile display mounting solution.\n\n- Integrated teardrop design speeds up wall plate installation by allowing pre-installation of the bolts to the wall\n- Centerless Shift provides up to 12.9" (327 mm) of post-installation lateral shift for limitless centering\n- Set screws keep the mount rigid, stable & secure throughout the life of the installation\n- Click Connect offers an audible click when the screen safely engages with the mount\n- Built-in cable stand provides easy access under the screen\n- A full line of accessories can be installed with the mount & the entire unit can be adjusted together\n- Multiple installation options for various stud distances\n- Exclusive nesting spacers can be stacked to achieve any depth\n- Quick-Store Cords use magnets to easily store & access pull cords\n- enhanced cable management with new end caps\n- Integrated Security\n- Ships with a custom hardware kit that can be hung from mount rails if installing in stages\n- Easy Open box with less waste to throw away Feature Feature Value Maximum weight capacity 56.8kg Maximum screen size compatibility 119.4 cm (47") Minimum VESA mount 100 x 100 mm Maximum VESA mount 640 x 400 mm Minimum screen size compatibility 66 cm (26") Number of displays supported 1 Height adjustment Y Product colour Black Certification ULWidth 654 mm Depth 51 mm Height 455 mm Package weight 6kg ...

Chief upgraded fixed wall mounts based on installer feedback & direct observations of installers in the field. Many new features join Fusion favorites like Centerless shift, Control Zone leveling adjustment & Click Connect Latching.\n \n New benefits included added stability, faster install, enhanced lateral shift, easier cable management & enhanced security.\n \n Installer-inspired Fusion fixed mount solves top flat panel installation problems, offering flexible adjustments for large displays with a low-profile display mounting solution.\n \n
- Integrated teardrop design speeds up wall plate installation by allowing pre-installation of the bolts to the wall\n
- Control Zone Leveling for post-installation fine tuning of height & leveling\n
- Centerless Shift provides up to 12.9" (327 mm) of post-installation lateral shift for limitless centering\n
- Set screws keep the mount rigid, stable & secure throughout the life of the installation\n
- Click Connect offers an audible click when the screen safely engages with the mount\n
- Built-in cable stand provides easy access under the screen\n
- A full line of accessories can be installed with the mount & the entire unit can be adjusted together\n
- Multiple installation options for various stud distances\n
- Exclusive nesting spacers can be stacked to achieve any depth\n
- Quick-Store Cords use magnets to easily store & access pull cords\n
- enhanced cable management with new end caps\n
- Integrated Security\n
- Ships with a custom hardware kit that can be hung from mount rails if installing in stages\n
- Easy Open box with less waste to throw away\n\n\n Mounting Minimum screen size compatibility 66 cm (26") Number of displays supported 1 Minimum VESA mount 100 x 100 mm Maximum VESA mount 650 x 400 mm Maximum screen size compatibility 119.4 cm (47") Maximum weight capacity 57kg Ergonomics Height adjustment Yes Technical details Number of displays supported 1 Product colour Black Design Product colour Black Weight & dimensions Width 654 mm Depth 51 mm Height 464 mm Packaging data Package weight 8 kg\n\n\n













...

Chief upgraded fixed wall mounts based on installer feedback & direct observations of installers in the field. Many new features join Fusion favorites like Centerless shift, Centris tilt & Click Connect Latching.\n\n New benefits included added stability, faster install, enhanced lateral shift, easier cable management & enhanced security.\n\n Installer-inspired Fusion tilt mount solves top flat panel installation problems, offering flexible adjustments for large displays with a low-profile display mounting solution.\n\n- Integrated teardrop design speeds up wall plate installation by allowing pre-installation of the bolts to the wall\n- Centerless Shift provides up to 17.5" (445 mm) of post-installation lateral shift
- 8.75" (222 mm) left/right of uprights
- for limitless centering\n- Centris low-profile tilt uses the center of gravity to balance the screen while maintaining a low profile\n- Set screws keep the mount rigid, stable & secure throughout the life of the installation\n- Click Connect offers an audible click when the screen safely engages with the mount\n- Built-in cable stand provides easy access under the screen\n- A full line of accessories can be installed with the mount & the entire unit can be adjusted together\n- Multiple installation options for various stud distances\n- Exclusive nesting spacers can be stacked to achieve any depth\n- Quick-Store Cords use magnets to easily store & access pull cords\n- enhanced cable management with new end caps\n- Integrated Security\n- Ships with a custom hardware kit that can be hung from mount rails if installing in stages\n- Easy Open box with less waste to throw away Feature Feature Value Maximum weight capacity 56.8kg Maximum screen size compatibility 116.8 cm (46") Minimum VESA mount 100 x 100 mm Maximum VESA mount 640 x 400 mm Minimum screen size compatibility 66 cm (26") Number of displays supported 1 Height adjustment Y Product colour Black Certification ULWidth 654 mm Depth 51 mm Height 419 mm Package weight 7kg

...

Chief upgraded fixed wall mounts based on installer feedback & direct observations of installers in the field. Many new features join Fusion favorites like Centerless shift, Centris tilt, Control Zone leveling adjustment & Click Connect Latching.\n\n New benefits included added stability, faster install, enhanced lateral shift, easier cable management & enhanced security.\n\n Installer-inspired Fusion tilt mount solves top flat panel installation problems, offering flexible adjustments for large displays with a low-profile display mounting solution.\n\n- Integrated teardrop design speeds up wall plate installation by allowing pre-installation of the bolts to the wall\n- Centerless Shift provides up to 17.5" (445 mm) of post-installation lateral shift
- 8.75" (222 mm) left/right of uprights
- for limitless centering\n- Centris low-profile tilt uses the center of gravity to balance the screen while maintaining a low profile\n- Set screws keep the mount rigid, stable & secure throughout the life of the installation\n- Click Connect offers an audible click when the screen safely engages with the mount\n- Built-in cable stand provides easy access under the screen\n- A full line of accessories can be installed with the mount & the entire unit can be adjusted together\n- Multiple installation options for various stud distances\n- Exclusive nesting spacers can be stacked to achieve any depth\n- Quick-Store Cords use magnets to easily store & access pull cords\n- enhanced cable management with new end caps\n- Integrated Security\n- Ships with a custom hardware kit that can be hung from mount rails if installing in stages\n- Easy Open box with less waste to throw away Feature Feature Value Maximum weight capacity 57kg Maximum screen size compatibility 119.4 cm (47") Minimum VESA mount 100 x 100 mm Maximum VESA mount 600 x 400 mm Minimum screen size compatibility 66 cm (26") Number of displays supported 1 Height adjustment Y Product colour Black Certification ULWidth 654 mm Depth 51 mm Height 432 mm Package weight 9kg

...

Chief upgraded fixed wall mounts based on installer feedback & direct observations of installers in the field. Many new features join Fusion favorites like Centerless shift, Centris tilt & Click Connect Latching.\n\n New benefits included added stability, faster install, enhanced lateral shift, easier cable management & enhanced security.\n\n Installer-inspired Fusion tilt mount solves top flat panel installation problems, offering flexible adjustments for large displays with a low-profile display mounting solution. Feature Feature Value Maximum weight capacity 91kg Maximum screen size compatibility 119.4 cm (47") Minimum VESA mount 100 x 100 mm Maximum VESA mount 570 x 600 mm Minimum screen size compatibility 81.3 cm (32") Height adjustment Y Product colour Black Certification ULWidth 530 mm Depth 81 mm Height 622 mm Package weight 11kg ...

The CMA330 allows projector cables to be routed through the extension column & out the top of the ceiling plate for cable management.\n Feature Feature Value Maximum weight capacity 226.8kg Product colour Black ...