Advancements in digital signage allow much greater freedom in creating & deploying any scale signage projects. At the forefront of this is the Datapath Fx 4 a multi-faceted stand alone display controller. The Fx 4 supports a choice of inputs high bandwidth loop-through as well as 4 genlocked outputs in either Display Port or HDMI. \n\n The Fx 4 features a Display Port 1.2 main input alongside two HDMI1.4 inputs offering 4k 4096x 2160p at 60fps. The intuitive user interface allows users to determine which input is used.\n\n Each output monitor can take its input from any region of the input image as all of the required cropping scaling rotation & frame-rate conversion is handled by the Fx 4 hardware. These regions can overlap to allow any output to replicate another or can be configured to support any creative splice of the source material. This allows the support of many non-rectangular screen arrangements as well as any mix of monitor orientations allowing users to create an almost unlimited multi-monitor canvas. \n\n The Fx 4 also allows users to pre-load an image for immediate display in those cases when the media source or cables malfunction & no signal is being received.\n\n Datapath&153;s hugely popular multi-screen design tool Wall Designer has also been updated to incorporate Fx 4. Wall Designer allows users to add displays from the ever expanding database of monitors visualise their content by adding inputs & adjusting display regions & finally instantly program all Datapath Fx 4s either via USB (Universal Serial Bus) or the network ports. \n\n Features \n&162; Infinite creative configurations \n&162; UHD / 4K60 input four HD 1080p outputs \n&162; Rotates crops scales mirrors & bezel corrects \n&162; Multiple inputs for flexible connectivity (Dual HDMI1.4 or single Display Port 1.2 inputs) \n&162; HDCP1.4 support on all inputs & outputs \n&162; True st&-alone operation: Fx 4 can adapt to changes in inputs by adjusting all scale factors \n&162; Network or USB (Universal Serial Bus) interfaces allow platform independent control (MAC OS X 10.6 & later) \n&162; Pre-load an image for use when signal is not detecte ...

Advancements in digital signage allow much greater freedom in creating & deploying any scale signage projects. At the forefront of this is the Datapath Fx 4 a multi-faceted stand alone display controller. The Fx 4 supports a choice of inputs high bandwidth loop-through as well as 4 genlocked outputs in either Display Port or HDMI. \n\n The Fx 4 features a Display Port 1.2 main input alongside two HDMI1.4 inputs offering 4k 4096x 2160p at 60fps. The intuitive user interface allows users to determine which input is used.\n\n Each output monitor can take its input from any region of the input image as all of the required cropping scaling rotation & frame-rate conversion is handled by the Fx 4 hardware. These regions can overlap to allow any output to replicate another or can be configured to support any creative splice of the source material. This allows the support of many non-rectangular screen arrangements as well as any mix of monitor orientations allowing users to create an almost unlimited multi-monitor canvas. \n\n The Fx 4 also allows users to pre-load an image for immediate display in those cases when the media source or cables malfunction & no signal is being received.\n\n Datapath&153;s hugely popular multi-screen design tool Wall Designer has also been updated to incorporate Fx 4. Wall Designer allows users to add displays from the ever expanding database of monitors visualise their content by adding inputs & adjusting display regions & finally instantly program all Datapath Fx 4s either via USB (Universal Serial Bus) or the network ports. \n\n Features \n&162; Infinite creative configurations \n&162; UHD / 4K60 input four HD 1080p outputs \n&162; Rotates crops scales mirrors & bezel corrects \n&162; Multiple inputs for flexible connectivity (Dual HDMI1.4 or single Display Port 1.2 inputs) \n&162; HDCP1.4 support on all inputs & outputs \n&162; True st&-alone operation: Fx 4 can adapt to changes in inputs by adjusting all scale factors \n&162; Network or USB (Universal Serial Bus) interfaces allow platform independent control (MAC OS X 10.6 & later) \n&162; Pre-load an image for use when signal is not detecte ...

Advancements in digital signage allow much greater freedom in creating & deploying any scale signage projects. At the forefront of this is the Datapath Fx 4 a multi-faceted stand alone display controller. The Fx 4 supports a choice of inputs high bandwidth loop-through as well as 4 genlocked outputs in either Display Port or HDMI. \n\n The Fx 4 features a Display Port 1.2 main input alongside two HDMI1.4 inputs offering 4k 4096x 2160p at 60fps. The intuitive user interface allows users to determine which input is used.\n\n Each output monitor can take its input from any region of the input image as all of the required cropping scaling rotation & frame-rate conversion is handled by the Fx 4 hardware. These regions can overlap to allow any output to replicate another or can be configured to support any creative splice of the source material. This allows the support of many non-rectangular screen arrangements as well as any mix of monitor orientations allowing users to create an almost unlimited multi-monitor canvas. \n\n The Fx 4 also allows users to pre-load an image for immediate display in those cases when the media source or cables malfunction & no signal is being received.\n\n Datapath&153;s hugely popular multi-screen design tool Wall Designer has also been updated to incorporate Fx 4. Wall Designer allows users to add displays from the ever expanding database of monitors visualise their content by adding inputs & adjusting display regions & finally instantly program all Datapath Fx 4s either via USB (Universal Serial Bus) or the network ports. \n\n Features \n&162; Infinite creative configurations \n&162; UHD / 4K60 input four HD 1080p outputs \n&162; Rotates crops scales mirrors & bezel corrects \n&162; Multiple inputs for flexible connectivity (Dual HDMI1.4 or single Display Port 1.2 inputs) \n&162; HDCP1.4 support on all inputs & outputs \n&162; True st&-alone operation: Fx 4 can adapt to changes in inputs by adjusting all scale factors \n&162; Network or USB (Universal Serial Bus) interfaces allow platform independent control (MAC OS X 10.6 & later) \n&162; Pre-load an image for use when signal is not detecte ...

The latest addition to TOA&0s acclaimed speaker line the new F-1000 Series of compact high efficiency two-way speakers achieve higher performance levels for wide range frequency response & power handling. Designed to be extremely versatile in order to meet different installation & application requirements the new F-1000 Series are ideal solutions that solve increasing needs for adaptable sound reinforcement.\n\n&162; External rotary control for various impedance settings\n&162; Multi position Bracket included \n&162; Built in speaker protection\n&162; Low impedance & 100V versions (F-100WT) Features Type Two Way Single/ Pair Single Wall mountable Yes ...

The latest addition to TOA&0s acclaimed speaker line the new F-1000 Series of compact high efficiency two-way speakers achieve higher performance levels for wide range frequency response & power handling. Designed to be extremely versatile in order to meet different installation & application requirements the new F-1000 Series are ideal solutions that solve increasing needs for adaptable sound reinforcement.\n\n&162; External rotary control for various impedance settings\n&162; Multi position Bracket included \n&162; Built in speaker protection\n&162; Low impedance & 100V versions (F-100WT) Features Type Two Way Single/ Pair Single Wall mountable Yes ...

The TOA F-1000 Series comprise a two-way speaker line of compact units offering wide frequency response & higher more powerful performance. These highly adaptable speaker systems are intended to meet the requirements of a wide range of venues & applications both indoors & outdoors. Features Type Two Way Single/ Pair Single Wall mountable Yes ...

F-2000BT full range wide dispersion speaker\n\n The latest addition to TOA&0s acclaimed speaker line the new F-2000 & F-1000 Series of compact high efficiency two-way speakers achieve higher performance levels for wide range frequency response & power handling. Designed to be extremely versatile in order to meet different installation & application requirements the new F-2000 & F-1000 Series are ideal solutions that solve increasing needs for adaptable sound reinforcement.\n\n&162; Low impedance & 100V versions (F-2000BT) \n&162; External rotary control for various impedance settings\n&162; Multi position Bracket included \n&162; Built in speaker protection Features Type Two Way Single/ Pair Single Wall mountable Yes Fashion Speaker Yes ...

F-2000BT full range wide dispersion speaker\n\n The latest addition to TOA&0s acclaimed speaker line the new F-2000 & F-1000 Series of compact high efficiency two-way speakers achieve higher performance levels for wide range frequency response & power handling. Designed to be extremely versatile in order to meet different installation & application requirements the new F-2000 & F-1000 Series are ideal solutions that solve increasing needs for adaptable sound reinforcement.\n\n&162; Low impedance & 100V versions (F-2000BT) \n&162; External rotary control for various impedance settings\n&162; Multi position Bracket included \n&162; Built in speaker protection Features Type Two Way Single/ Pair Single Wall mountable Yes Fashion Speaker Yes ...

Product Family: Getac F110\n\n Datasheet: https://www.jarltech.com/ger_new/new/pdf/en/getac_f 110.pdf\n\n Warranty: 12 Months ...

Product Family: Getac F110\n\n Datasheet: https://www.jarltech.com/ger_new/new/pdf/en/getac_f 110.pdf\n\n Warranty: 12 Months ...