USB C to Analog Audio 3.5mm stereo jack for all Bright Sign LS423 players. ...

USB C to Analog Audio 3.5mm stereo jack for all Bright Sign LS423 players. ...

USB C to Analog Audio 3.5mm stereo jack for all Bright Sign LS423 players. ...

JBL1780 CBT 1000 Loud Speaker Expanding upon our highly successful Constant Beamwidth Technology&132;&162; breakthrough the CBT1000 represents the next-generation in pattern control consistency utilizing adjustable vertical coverage & a tapered horizontal waveguide to increase the versatility of aiming the coverage of the loudspeaker to more accurately map to the room geometry in a wide variety of listening spaces.\n\n&162; Asymmetrical vertical coverage sends more sound toward far area of room to make front-to-back sound levels more consistent.\n&162; Components: Twenty-four (24) 25 mm (1 in) extra-high-power soft dome tweeters & six (6) 165 mm (6-1/2&157;) high-excursion LF drivers arranged coaxially.\n&162; Constant Beamwidth Technology&132;&162; provides constant directivity up to the highest frequencies & reduces out of coverage lobing.\n&162; Vertical pattern coverage is individually adjustable through a range of four (4) &156; Pattern Up&157; angles & four (4) &156; Pattern Down&157; coverage angles for a total of sixteen (16) different coverage combinations all without the use of external DSP processing.\n&162; Patent-pending Tapered Horizontal Waveguide provides a continuously varying horizontal dispersion (very wide for short-throw narrower for long-throw) delivering superior coverage in both the front & rear corners of a room.\n&162; Single-speaker room coverage at high SPL with little over-splash & strong bass response down to below 40 Hz.\n&162; Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode.\n&162; Swivel (pan)/tilt wall bracket included. Features Wall mountable Yes

Dimensions W/O Stand (W x H x D)250 x 345 x 1020 mm Weight 38.6 kg

...

JBL1780 CBT 1000 Loud Speaker Expanding upon our highly successful Constant Beamwidth Technology&132;&162; breakthrough the CBT1000 represents the next-generation in pattern control consistency utilizing adjustable vertical coverage & a tapered horizontal waveguide to increase the versatility of aiming the coverage of the loudspeaker to more accurately map to the room geometry in a wide variety of listening spaces.\n\n&162; Asymmetrical vertical coverage sends more sound toward far area of room to make front-to-back sound levels more consistent.\n&162; Components: Twenty-four (24) 25 mm (1 in) extra-high-power soft dome tweeters & six (6) 165 mm (6-1/2&157;) high-excursion LF drivers arranged coaxially.\n&162; Constant Beamwidth Technology&132;&162; provides constant directivity up to the highest frequencies & reduces out of coverage lobing.\n&162; Vertical pattern coverage is individually adjustable through a range of four (4) &156; Pattern Up&157; angles & four (4) &156; Pattern Down&157; coverage angles for a total of sixteen (16) different coverage combinations all without the use of external DSP processing.\n&162; Patent-pending Tapered Horizontal Waveguide provides a continuously varying horizontal dispersion (very wide for short-throw narrower for long-throw) delivering superior coverage in both the front & rear corners of a room.\n&162; Single-speaker room coverage at high SPL with little over-splash & strong bass response down to below 40 Hz.\n&162; Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode.\n&162; Swivel (pan)/tilt wall bracket included. Features Wall mountable Yes

Dimensions W/O Stand (W x H x D)250 x 345 x 1020 mm Weight 38.6 kg

...

JBL1780 CBT 1000 Loud Speaker Expanding upon our highly successful Constant Beamwidth Technology&132;&162; breakthrough the CBT1000 represents the next-generation in pattern control consistency utilizing adjustable vertical coverage & a tapered horizontal waveguide to increase the versatility of aiming the coverage of the loudspeaker to more accurately map to the room geometry in a wide variety of listening spaces.\n\n&162; Asymmetrical vertical coverage sends more sound toward far area of room to make front-to-back sound levels more consistent.\n&162; Components: Twenty-four (24) 25 mm (1 in) extra-high-power soft dome tweeters & six (6) 165 mm (6-1/2&157;) high-excursion LF drivers arranged coaxially.\n&162; Constant Beamwidth Technology&132;&162; provides constant directivity up to the highest frequencies & reduces out of coverage lobing.\n&162; Vertical pattern coverage is individually adjustable through a range of four (4) &156; Pattern Up&157; angles & four (4) &156; Pattern Down&157; coverage angles for a total of sixteen (16) different coverage combinations all without the use of external DSP processing.\n&162; Patent-pending Tapered Horizontal Waveguide provides a continuously varying horizontal dispersion (very wide for short-throw narrower for long-throw) delivering superior coverage in both the front & rear corners of a room.\n&162; Single-speaker room coverage at high SPL with little over-splash & strong bass response down to below 40 Hz.\n&162; Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode.\n&162; Swivel (pan)/tilt wall bracket included. Features Wall mountable Yes

Dimensions W/O Stand (W x H x D)250 x 345 x 1020 mm Weight 38.6 kg

...

Patent-pending Constant Beamwidth Technology&132;&162; provides constant directivity up to the highest frequencies & reduces out-of-coverage lobing. \n \n Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode. \n \n Dynamic Sonic Guard&132;&162; overload protection \n \n Built-in 70V/100V transformer plus 8 ohm direct capability. \n \n Swivel (pan) / tilt wall bracket included. \n\n Components: Eight 50 mm\n (2 in) Full-Range \n\n \n Frequency Range (-10 d B): 80 Hz " 20 k Hz \n\n \n Coverage Pattern: Vertical 20&136;&158; (1.5 k Hz
- 16 k Hz &177;10&136;&158;)\n Horizontal 150&136;&158; (ave 1 k Hz " 4 k Hz &177;20&136;&158;) \n\n \n Sensitivity (2.83V@ 1m): 93 d B (speech mode 2 k Hz
- 14 k Hz)\n 89 d B (music mode 300 Hz
- 18 k Hz) \n\n \n Nominal Impedance: 8 ohms \n\n \n Power Capacity (8 ohm setting): 150W (600W peak) 2 hrs\n 100 W (400W peak) 100 hrs \n\n \n Max SPL: Speech mode: 115 d B cont ave (121 peak)\n Music mode: 111 d B cont ave (117 peak) \n\n \n 70V/100V Transformer Taps: 60W 30W 15W (7.5W at 70V only) & 8&206;&169; thru via switch \n\n \n Enclosure: Fiberglass reinforced ABS cabinet painted aluminum grille \n\n \n Outdoor Capability: IP-54 rated per IEC529. UV moisture & salt-spray resistant \n\n \n Colors: Black or White (-WH) \n\n \n Insert Points: Ten M6 insert points on back panel. \n\n \n Mounting: Included swivel (pan) / tilt wall bracket provides continuously variable +/-80 degree left-right swivel aiming (at no up/down tilt -- see Bracket Guide for maximum swivel range at various up/down tilt angles) continuously adjustable &177;15 degree tilt as well as 5 degree fixed increment points within the range. Ten threaded mounting points located on back panel conform to industry standard rectangular 108 x 51 mm (4.25 x 2.0 in) pattern for Omni Mount&134; 30.0 & other compatible third-party brackets. Threaded mounting points can be utilized for suspension. \n\n \n Dimensions (H x W x D): 528 x 99 x 153 mm\n (20.8 x 3.9 x 6.0 in) \n\n Net Weight: 4.1kg (9.0 lb)


...

Patent-pending Constant Beamwidth Technology&132;&162; provides constant directivity up to the highest frequencies & reduces out-of-coverage lobing. \n \n Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode. \n \n Dynamic Sonic Guard&132;&162; overload protection \n \n Built-in 70V/100V transformer plus 8 ohm direct capability. \n \n Swivel (pan) / tilt wall bracket included. \n\n Components: Eight 50 mm\n (2 in) Full-Range \n\n \n Frequency Range (-10 d B): 80 Hz " 20 k Hz \n\n \n Coverage Pattern: Vertical 20&136;&158; (1.5 k Hz
- 16 k Hz &177;10&136;&158;)\n Horizontal 150&136;&158; (ave 1 k Hz " 4 k Hz &177;20&136;&158;) \n\n \n Sensitivity (2.83V@ 1m): 93 d B (speech mode 2 k Hz
- 14 k Hz)\n 89 d B (music mode 300 Hz
- 18 k Hz) \n\n \n Nominal Impedance: 8 ohms \n\n \n Power Capacity (8 ohm setting): 150W (600W peak) 2 hrs\n 100 W (400W peak) 100 hrs \n\n \n Max SPL: Speech mode: 115 d B cont ave (121 peak)\n Music mode: 111 d B cont ave (117 peak) \n\n \n 70V/100V Transformer Taps: 60W 30W 15W (7.5W at 70V only) & 8&206;&169; thru via switch \n\n \n Enclosure: Fiberglass reinforced ABS cabinet painted aluminum grille \n\n \n Outdoor Capability: IP-54 rated per IEC529. UV moisture & salt-spray resistant \n\n \n Colors: Black or White (-WH) \n\n \n Insert Points: Ten M6 insert points on back panel. \n\n \n Mounting: Included swivel (pan) / tilt wall bracket provides continuously variable +/-80 degree left-right swivel aiming (at no up/down tilt -- see Bracket Guide for maximum swivel range at various up/down tilt angles) continuously adjustable &177;15 degree tilt as well as 5 degree fixed increment points within the range. Ten threaded mounting points located on back panel conform to industry standard rectangular 108 x 51 mm (4.25 x 2.0 in) pattern for Omni Mount&134; 30.0 & other compatible third-party brackets. Threaded mounting points can be utilized for suspension. \n\n \n Dimensions (H x W x D): 528 x 99 x 153 mm\n (20.8 x 3.9 x 6.0 in) \n\n Net Weight: 4.1kg (9.0 lb)


...

Patent-pending Constant Beamwidth Technology&132;&162; provides constant directivity up to the highest frequencies & reduces out-of-coverage lobing. \n \n Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode. \n \n Dynamic Sonic Guard&132;&162; overload protection \n \n Built-in 70V/100V transformer plus 8 ohm direct capability. \n \n Swivel (pan) / tilt wall bracket included. \n\n Components: Eight 50 mm\n (2 in) Full-Range \n\n \n Frequency Range (-10 d B): 80 Hz " 20 k Hz \n\n \n Coverage Pattern: Vertical 20&136;&158; (1.5 k Hz
- 16 k Hz &177;10&136;&158;)\n Horizontal 150&136;&158; (ave 1 k Hz " 4 k Hz &177;20&136;&158;) \n\n \n Sensitivity (2.83V@ 1m): 93 d B (speech mode 2 k Hz
- 14 k Hz)\n 89 d B (music mode 300 Hz
- 18 k Hz) \n\n \n Nominal Impedance: 8 ohms \n\n \n Power Capacity (8 ohm setting): 150W (600W peak) 2 hrs\n 100 W (400W peak) 100 hrs \n\n \n Max SPL: Speech mode: 115 d B cont ave (121 peak)\n Music mode: 111 d B cont ave (117 peak) \n\n \n 70V/100V Transformer Taps: 60W 30W 15W (7.5W at 70V only) & 8&206;&169; thru via switch \n\n \n Enclosure: Fiberglass reinforced ABS cabinet painted aluminum grille \n\n \n Outdoor Capability: IP-54 rated per IEC529. UV moisture & salt-spray resistant \n\n \n Colors: Black or White (-WH) \n\n \n Insert Points: Ten M6 insert points on back panel. \n\n \n Mounting: Included swivel (pan) / tilt wall bracket provides continuously variable +/-80 degree left-right swivel aiming (at no up/down tilt -- see Bracket Guide for maximum swivel range at various up/down tilt angles) continuously adjustable &177;15 degree tilt as well as 5 degree fixed increment points within the range. Ten threaded mounting points located on back panel conform to industry standard rectangular 108 x 51 mm (4.25 x 2.0 in) pattern for Omni Mount&134; 30.0 & other compatible third-party brackets. Threaded mounting points can be utilized for suspension. \n\n \n Dimensions (H x W x D): 528 x 99 x 153 mm\n (20.8 x 3.9 x 6.0 in) \n\n Net Weight: 4.1kg (9.0 lb)


...

Patent-pending Constant Beamwidth Technology&132;&162; provides constant directivity up to the highest frequencies & reduces out-of-coverage lobing. \n \n Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode. \n \n Dynamic Sonic Guard&132;&162; overload protection \n \n Built-in 70V/100V transformer plus 8 ohm direct capability. \n \n Swivel (pan) / tilt wall bracket included. \n\n Components: Eight 50 mm\n (2 in) Full-Range \n\n \n Frequency Range (-10 d B): 80 Hz " 20 k Hz \n\n \n Coverage Pattern: Vertical 20&136;&158; (1.5 k Hz
- 16 k Hz &177;10&136;&158;)\n Horizontal 150&136;&158; (ave 1 k Hz " 4 k Hz &177;20&136;&158;) \n\n \n Sensitivity (2.83V@ 1m): 93 d B (speech mode 2 k Hz
- 14 k Hz)\n 89 d B (music mode 300 Hz
- 18 k Hz) \n\n \n Nominal Impedance: 8 ohms \n\n \n Power Capacity (8 ohm setting): 150W (600W peak) 2 hrs\n 100 W (400W peak) 100 hrs \n\n \n Max SPL: Speech mode: 115 d B cont ave (121 peak)\n Music mode: 111 d B cont ave (117 peak) \n\n \n 70V/100V Transformer Taps: 60W 30W 15W (7.5W at 70V only) & 8&206;&169; thru via switch \n\n \n Enclosure: Fiberglass reinforced ABS cabinet painted aluminum grille \n\n \n Outdoor Capability: IP-54 rated per IEC529. UV moisture & salt-spray resistant \n\n \n Colors: Black or White (-WH) \n\n \n Insert Points: Ten M6 insert points on back panel. \n\n \n Mounting: Included swivel (pan) / tilt wall bracket provides continuously variable +/-80 degree left-right swivel aiming (at no up/down tilt -- see Bracket Guide for maximum swivel range at various up/down tilt angles) continuously adjustable &177;15 degree tilt as well as 5 degree fixed increment points within the range. Ten threaded mounting points located on back panel conform to industry standard rectangular 108 x 51 mm (4.25 x 2.0 in) pattern for Omni Mount&134; 30.0 & other compatible third-party brackets. Threaded mounting points can be utilized for suspension. \n\n \n Dimensions (H x W x D): 528 x 99 x 153 mm\n (20.8 x 3.9 x 6.0 in) \n\n Net Weight: 4.1kg (9.0 lb)


...