APC Smart-UPS X 2200VA Uninterruptible Power Supply (UPS)
Line-Interactive 1980 W 10 AC Outlet(s)

Product Description

Cold-start capable\n Provides temporary battery power when the utility power is out.\n \n Energy meter\n Provides actual kilowatt hours of usage for energy conscious users.\n \n Green mode\n Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.\n \n High online efficiency\n Reduces utlility costs, generates less heat.\n \n Intuitive LCD interface\n Provides clear & accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.\n \n Predictive replace battery date\n Dynamically provides the month & year when battery replacement is recommended to aide in long term maintenance planning.\n \n Preinstalled network management card\n Provides for remote management & control of the UPS over a network out of the box.\n \n Single switched outlet group\n Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off & non-critical load shedding.\n \n Smart Slot\n Customize UPS capabilities with management cards.\n \n Temperature-compensated battery charging\n Prolongs battery life by regulating the charge voltage according to battery temperature.\n \n Availability\n \n Disconnected battery notification\n Warns when a battery is not available to provide backup power.\n \n Automatic restart of loads after UPS shutdown\n Automatically starts up the connected equipment upon the return of utility power.\n \n Automatic self-test\n Periodic battery self-test ensures early detection of a battery that needs to be replaced.\n \n Intelligent battery management\n Maximizes battery performance, life, & reliability through intelligent, precision charging.\n \n Temperature-compensated battery charging\n Prolongs battery life by regulating the charge voltage according to battery temperature.\n \n Boost & Trim Automatic Voltage Regulation (AVR)\n Gives higher application availability by correcting low & high voltage conditions without using the battery (not available on all models).\n \n Power conditioning\n Protects connected loads from surges, spikes, lightning, & other power disturbances.\n \n Manageability\n \n Network manageable\n Provides remote power management of the UPS over the network.\n \n Serial connectivity\n Provides management of the UPS via a serial port.\n \n Audible alarms\n Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.\n \n Disconnected battery notification\n Warns when a battery is not available to provide backup power.\n \n LED status indicators\n Quickly understand unit & power status with visual indicators.\n \n USB (Universal Serial Bus) connectivity\n Provides management of the UPS via a USB (Universal Serial Bus) port (not available on all models).\n \n Safety\n \n Safety-agency approved\n Ensures the product has been tested & approved to work safely with the connected service provider equipment & within the specified environment.\n \n Marketing Features\n \n Low operating & maintenance costs with high efficiency, proven reliability & intelligent battery management\n Patented green operating mode achieves efficiencies over 97%. Smart-ups was the first network UPS to be Energy Star certified. Intelligent battery management, pioneered by APC, maximizes battery performance & life through intelligent, precision temperature compensated charging.\n Dynamic battery replacement date indicator & automatic self tests insure battery reliability & warn in advance of needing replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down. Designed & manufactured by APC for over 23 years, Smart-UPS is the world&153;s most trusted network UPS with over 25 million units sold.\n \n Save time with easy & convenient remote accessibility\n Network manageable via serial, USB (Universal Serial Bus) or optional ethernet.

Includes:: Powerchute&174; Business Edition Software for convenient monitoring & control, safe operating system shutdown & innovative energy management capabilities.\n \n Smarter productivity with ability to tailor to your specific application needs\n Intuitive LCD interface provides clear information with the ability to configure the UPS locally with easy to use navigation keys. Over 15 different programmable settings including switched outlet group control allow for application specific settings, thresholds & notifications.\n \n Peace of mind that comes with full equipment compatibility & reliability of a leader\n Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested & approved means that you can deploy Smart-UPS with complete confidence that they meet or exceed the industry&153;s most rigorous standards.\n \n Avoids costly power problems by keeping your IT equipment & data safe & available\n Network grade power conditioning protects from damaging surges & disruptive noise. Solid state automatic voltage regulation boosts low input voltage up to 30% & trims high voltage up to 12% without battery operation. Reliable battery back-up capacity to power through outages or gracefully shutdown systems\n \n Serviceability\n \n Resettable circuit breakers\n Enables a quick recovery from overload events.\n \n Hot-swappable batteries\n Ensures clean, uninterrupted power to protected equipment while batteries are being replaced\n \n Predictive failure notification\n Provides early-warning fault analysis ensuring proactive component replacement.\n \n User-replaceable batteries\n Increases availability by allowing a trained user to perform upgrades & replacements of the batteries reducing Mean Time to Repair (MTTR)\n \n Battery failure notification\n Provides early-warning fault analysis on batteries enabling timely preventive maintenance\n \n Adaptability\n \n Adjustable voltage-transfer points\n Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.\n \n Adjustable voltage sensitivity\n Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.\n\n class="generic"> Power Output voltage regulation 5% Output frequency regulation+/- 3 Hz Output power 1980 WInput operation voltage (min)140 VInput operation voltage (max)280 VOutput operation voltage (min)208 VOutput operation voltage (max)240 VEmergency Power Off (EPO) Yes Output power capacity 2200 VAPorts & interfaces Cable length 2 m AC outlets quantity 10 AC outlet (s)AC outlet types C13 coupler, C19 coupler, C20 coupler Power plug C20 coupler USB 2.0 ports quantity 1 Ethernet LAN (RJ-45) ports 1 Performance Audible alarm modes Battery replacement UPS topology Line-Interactive Waveform Sine Auto-restart Yes Response time 10 ms LED indicators Yes EMI/RFI noise filtering Yes Surge protection Yes Noise level 55 d B Audible alarm (s) Yes Features Output frequency 50/60 Hz Web-based management Yes Audible alarm modes Battery replacement UPS topology Line-Interactive Waveform Sine Output voltage regulation 5% Output frequency regulation+/- 3 Hz Auto-restart Yes Response time 10 ms Output power 1980 WInput operation voltage (min)140 VInput operation voltage (max)280 VOutput operation voltage (min)208 VOutput operation voltage (max)240 VEMI/RFI noise filtering Yes Surge protection Yes Emergency Power Off (EPO) Yes Noise level 55 d B Audible alarm (s) Yes Output power capacity 2200 VAInput frequency 50/60 Hz Battery Battery capacity 702 Ah Battery technology Sealed Lead Acid (VRLA) Battery recharge time 3 h Hot-swap battery Yes Cold start Yes Automatic battery test Yes Design Rack capacity 2UForm factor Rackmount/ Tower LED indicators Yes Product colour Black Display LEDCertification CE, EAC, EN/IEC 62040-1, EN/IEC 62040-2, GS Mark, IRAM, RCM, VDE, WEEECable length 2 m Ro HS compliance Yes Operational conditions Operating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-15
- 45 &176;COperating relative humidity (H-H)0
- 95% Storage relative humidity (H-H)0
- 95% Operating altitude 0
- 3000 m Non-operating altitude 0
- 15000 m Technical details Output voltage 230 VOutput frequency 50/60 Hz Management features Web-based management Yes Weight & dimensions Weight 38.6kg Width 178 mm Height 432 mm Depth 483 mm Package width 586 mm Package depth 633 mm Package height 330 mm Package weight 47.6kg Packaging data Quick installation guide Yes Cables included Input power cable, USB cable Resource CDYes Rack mount kit Yes Package width 586 mm Package depth 633 mm Package height 330 mm Package weight 47.6kg Logistics data Quantity per pallet 6 pc (s) Certificates Certification CE, EAC, EN/IEC 62040-1, EN/IEC 62040-2, GS Mark, IRAM, RCM, VDE, WEEERo HS compliance Yes Other features Output voltage 230 VPackaging content Quick installation guide Yes Cables included Input power cable, USB cable Resource CDYes Rack mount kit Yes\n\n\n\n