Availability\n Boost & Trim Automatic Voltage Regulation (AVR)\n Gives higher application availability by correcting low & high voltage conditions without using the battery.\n \n Intelligent battery management\n Maximizes battery performance, life, & reliability through intelligent, precision charging.\n \n Power conditioning\n Protects connected loads from surges, spikes, lightning, & other power disturbances.\n \n Temperature-compensated battery charging\n Prolongs battery life by regulating the charge voltage according to battery temperature.\n \n Automatic restart of loads after UPS shutdown\n Automatically starts up the connected equipment upon the return of utility power.\n \n Automatic self-test\n Periodic battery self-test ensures early detection of a battery that needs to be replaced.\n \n Disconnected battery notification\n Warns when a battery is not available to provide backup power.\n \n Manageability\n Network manageable\n Provides remote management of the UPS over the network.\n \n Audible alarms\n Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.\n \n LED status indicators\n Quickly understand unit & power status with visual indicators.\n \n Serial Connectivity\n Provides management of the UPS via a serial port.\n \n USB (Universal Serial Bus) connectivity\n Provides management of the UPS via a USB (Universal Serial Bus) port (not available on all models).\n \n Disconnected battery notification\n Warns when a battery is not available to provide backup power.\n \n Serviceability\n User-replaceable batteries\n Increases availability by allowing a trained user to perform upgrades & replacements of the batteries reducing Mean Time to Repair (MTTR)\n \n Hot-swappable batteries\n Ensures clean, uninterrupted power to protected equipment while batteries are being replaced\n \n Predictive failure notification\n Provides early-warning fault analysis ensuring proactive component replacement.\n \n Resettable circuit breakers\n Enables a quick recovery from overload events.\n \n Battery failure notification\n Provides early-warning fault analysis on batteries enabling timely preventive maintenance\n \n Adaptability\n Adjustable voltage-transfer points\n Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.\n \n Adjustable voltage sensitivity\n Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.\n \n Safety\n Safety-agency approved\n Ensures the product has been tested & approved to work safely with the connected service provider equipment & within the specified environment.\n\n class="generic"> Power Output frequency regulation 50/60 Hz Output power 2700 WOutput operation voltage (min)208 VOutput operation voltage (max)240 VSurge energy rating 645 JEfficiency 98.5% Emergency Power Off (EPO) Yes Output power capacity 3000 VAPorts & interfaces Cable length 2.44 m Smart Slot Yes AC outlets quantity 9 AC outlet (s)AC outlet types C13 coupler, C19 coupler Power plug British BS1363A, IEC-320 C20, Schuko CEE 7/EU1-16 P Number of output IEC jumpers 2 Performance Hold time (min)2 ms Hold time (max)10 ms UPS topology Line-Interactive Waveform Sine Auto-restart Yes Automatic Voltage Regulation (AVR) Yes LED indicators Battery replacement Surge protection Yes Noise level 55 d B Audible alarm (s) Yes Features Hold time (min)2 ms Hold time (max)10 ms UPS topology Line-Interactive Waveform Sine Output frequency regulation 50/60 Hz Auto-restart Yes Automatic Voltage Regulation (AVR) Yes Output power 2700 WOutput operation voltage (min)208 VOutput operation voltage (max)240 VSurge energy rating 645 JEfficiency 98.5% Surge protection Yes Emergency Power Off (EPO) Yes Noise level 55 d B Audible alarm (s) Yes Output power capacity 3000 VAInput frequency 50/60 Hz Battery Battery life (max)5 year (s) Battery capacity 738 VAh Battery technology Sealed Lead Acid (VRLA) Battery recharge time 3 h Typical backup time at half load 18 min Typical backup time at full load 6.3 min Hot-swap battery Yes Automatic battery test Yes Design Rack capacity 2UForm factor Rackmount/ Tower LED indicators Battery replacement Product colour Black Certification C-tick, CE, EN 50091-1, EN 50091-2, EN 55022 Class A, EN 60950, FCC Part 15 Class A, GOST, IRAM, UL 1778, VDE, REACH, PEP, EOLICable length 2.44 m Ro HS compliance Yes Operational conditions Operating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-15
- 45 &176;COperating relative humidity (H-H)0
- 95% Storage relative humidity (H-H)0
- 95% Operating altitude 0
- 3000 m Non-operating altitude 0
- 15000 m Packaging data Packaging content Web/SNMP Management Card Cables included RS-232 Rack mount kit Yes Manual Yes Temperature sensor Yes Software CDYes Package width 596 mm Package depth 869 mm Package height 85 mm Package weight 45.4kg Weight & dimensions Weight 37.3kg Width 432 mm Height 85 mm Depth 667 mm Package width 596 mm Package depth 869 mm Package height 85 mm Package weight 45.4kg Logistics data Quantity per pallet 8 pc (s) Certificates Certification C-tick, CE, EN 50091-1, EN 50091-2, EN 55022 Class A, EN 60950, FCC Part 15 Class A, GOST, IRAM, UL 1778, VDE, REACH, PEP, EOLIRo HS compliance Yes Other features Packaging content Web/SNMP Management Card Nominal output voltage 230 VNominal input voltage 230 VPackaging content Cables included RS-232 Rack mount kit Yes Manual Yes Temperature sensor Yes Software CDYes Packaging content Web/SNMP Management Card\n\n\n\nhttp://objects.icecat.biz/objects/mmo_9491695_1474544212_5458_19340.pdf