Basic Protection Against Power Surges for Computers & Electronics.\n\n Surge Arrest will warn you if its circuitry has been damaged by heavy strike or power line surge & it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged Surge Arrest free of charge.\n\n Resettable circuit breaker\n\n Easy recovery from overloads; no need to replace a fuse.\n\n Right Angle Plug\n\n Plug angle allows for equipment & furniture to be placed closer to the wall than with a standard power cord. Reduces cord stress too.\n\n EMI & RFI noise filtering\n\n Reduces line noise that can cause data loss & keyboard errors.\n\n Catastrophic Event Protection\n\n Surge Arrest components such as MOVs & Thermal fuse ensure instantaneous reaction to lightning strikes & wiring faults. If the surge components are damaged due to power spike or over voltage, excess power cannot reach your equipment. Unlike the APC Surge Arrest products, most surge suppressors continue to let power through even after circuits have been damaged, leaving your equipment exposed to other damaging surges.\n\n\n\n Product ID: PM5-GR\n\n\n\n\n\n Model: PM5-GR\n\n\n\n\n\n\n\n\n\n\n\n\n\n ...

Surge Arrest components such as MOVs & Thermal fuse ensure instantaneous reaction to lightning strikes & wiring faults. If the surge components are damaged due to power spike or over voltage, excess power cannot reach your equipment. Unlike the APC Surge Arrest products, most surge suppressors continue to let power through even after circuits have been damaged, leaving your equipment exposed to other damaging surges.nn APC surge protectors undergo stringent testing by IEEE, & are awarded ""let-through ratings"", which indicate the maximum voltage level that can possibly reach your equipment after a surge or voltage spike has passed through an electric surge protector. Lower IEEE let-through ratings indicate better protection & performance. The APC Essential Surge Arrest series offers optimal performance with a let-through rating of less than 330V for North American products, & a rating of less than 15% for products sold worldwide. All APC products comply with local agency safety requirements, including UL in North America & CE/ Kema/ Gost/C-tick/A-Tick/ Telepermit in their respective regions.nn Surge Arrest will warn you if its circuitry has been damaged by heavy strike or power line surge & it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged Surge Arrest free of charge.\n\n\n\n Product ID: PM6U-UK\n\n\n\n\n\n Model: PM6U-UK\n\n\n\n\n\n\n\n\n\n\n\n\n\n ...

Surge Arrest components such as MOVs & Thermal fuse ensure instantaneous reaction to lightning strikes & wiring faults. If the surge components are damaged due to power spike or over voltage, excess power cannot reach your equipment. Unlike the APC Surge Arrest products, most surge suppressors continue to let power through even after circuits have been damaged, leaving your equipment exposed to other damaging surges.nn APC surge protectors undergo stringent testing by IEEE, & are awarded ""let-through ratings"", which indicate the maximum voltage level that can possibly reach your equipment after a surge or voltage spike has passed through an electric surge protector. Lower IEEE let-through ratings indicate better protection & performance. The APC Essential Surge Arrest series offers optimal performance with a let-through rating of less than 330V for North American products, & a rating of less than 15% for products sold worldwide. All APC products comply with local agency safety requirements, including UL in North America & CE/ Kema/ Gost/C-tick/A-Tick/ Telepermit in their respective regions.nn Surge Arrest will warn you if its circuitry has been damaged by heavy strike or power line surge & it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged Surge Arrest free of charge.\n\n\n\n Product ID: PM6U-UK\n\n\n\n\n\n Model: PM6U-UK\n\n\n\n\n\n\n\n\n\n\n\n\n\n ...

Free up space & secure power cords between rack-mount PDUs & attached IT equipment with this exclusive easy-to-use cord retention method. While these cords will fit into any standard IEC receptacle or power inlet; the "locking" feature is enabled only when used with APC AP8000 series Rack PDUs or IT equipment with built-in locking receptacles. These locking connectors reduce the probability of accidentally disconnecting cords & dropping loads.\n\n class="generic"> Ports & interfaces Connector 1C19 coupler Cable length 3 m Weight & dimensions Dimensions (Wx Dx H)152 x 102 x 432 mm Width 152 mm Depth 102 mm Height 432 mm Weight 490 g Package width 152 mm Package depth 102 mm Package height 432 mm Package weight 490 g Features Cable colour Black Connector gender Male/ Female Connector 1C19 coupler Cable length 3 m Power Input voltage 230 VInput current 16 APackaging data Package width 152 mm Package depth 102 mm Package height 432 mm Package weight 490 g Operational conditions Operating temperature (T-T)0
- 70 &176;CStorage temperature (T-T)-25
- 70 &176;COperating relative humidity (H-H)20
- 80% Storage relative humidity (H-H)20
- 80% Operating altitude 0
- 3000 m Non-operating altitude 0
- 15000 m Technical details Cable colour Black Weight (imperial)0.49kg (1.08 lbs) Other features Dimensions (Wx Dx H)152 x 102 x 432 mm Weight (imperial)0.49kg (1.08 lbs)\n\n\n\n





...

The Back-UPS RS offers high performance protection for your business & office computer systems. It provides abundant battery backup power, allowing you to work through medium & extended length power outages. It also safeguards your equipment from damaging surges & spikes that travel along utility, phone & network lines. A distinguishing feature of the Back-UPS RS is automatic voltage regulation (AVR). AVR instantly adjusts both low & high voltages to safe levels, so you can work indefinitely during brownouts & overvoltage situations, saving the battery for power outages when you need it most. Award-winning shutdown software automatically powers down your computer system in the event of an extended power outage. Additional features like audible alarms, LED status indicators, user replaceable battery, push-button circuit breakers & plentiful outlets (including transformer-block spaced outlets) make the Back-UPS RS the perfect unit to protect your business' productivity from the constant threat of power problems & lost data. \n \n BR900G-FR
Features:\n \n Power-saving outlets\n Automatically cuts power to idle equipment to conserve electricity.\n \n Boost Automatic Voltage Regulation (AVR)\n Preserves battery life & maximizes runtime by correcting low voltages without discharging the battery.\n \n Battery-protected & surge-only outlets\n Reserves power capacity & run time for connected equipment that require battery back-up while providing surge only protection for less critical equipment\n \n Safety-agency approved\n Ensures the product has been tested & approved to work safely with the connected service provider equipment & within the specified environment.\n \n Power conditioning\n Protects connected loads from surges, spikes, lightning, & other power disturbances.\n \n Audible alarms\n Provides notification of changing utility power & UPS conditions.\n \n Automatic restart of loads after UPS shutdown\n Automatically starts up the connected equipment upon the return of utility power.\n \n Automatic self-test\n Periodic battery self-test ensures early detection of a battery that needs to be replaced.\n \n Battery replacement without tools\n Allows quick, easy battery replacement.\n \n LED status indicators\n Quickly understand unit & power status with visual indicators.\n \n Cold-start capable\n Provides temporary battery power when the utility power is out.\n \n Hot-swappable batteries\n Ensures clean, uninterrupted power to protected equipment while batteries are being replaced\n \n Resettable circuit breakers\n Enables a quick recovery from overload events.\n \n Transformer-block spaced outlets\n Protect equipment with input transformer blocks without blocking access to other receptacles.\n \n User-replaceable batteries\n Increases availability by allowing a trained user to perform upgrades & replacements of the batteries reducing Mean Time to Repair (MTTR)\n \n Manageability:\n \n Adjustable voltage sensitivity\n Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.\n \n Adjustable voltage-transfer points\n Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.\n \n Intelligent battery management\n Micro-processor controlled battery charging & diagnostic testing ensures maximum battery life.\n\n class="generic"> Power Output power 540 WSurge energy rating 355 JOutput power capacity 900 VAPorts & interfaces Cable length 1.52 m USB 2.0 ports quantity 1 Modem (RJ-11) ports 1 Ethernet LAN (RJ-45) ports 1 Battery Battery type APCRBC123 Battery technology Sealed Lead Acid (VRLA) Battery recharge time 8 h Replacement battery cartridge 1 Performance Noise level 45 d B Audible alarm (s) Yes Features Output power 540 WSurge energy rating 355 JNoise level 45 d B Audible alarm (s) Yes Output power capacity 900 VADesign Product colour Black Cable length 1.52 m Operational conditions Operating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-5
- 45 &176;COperating relative humidity (H-H)0
- 95% Storage relative humidity (H-H)0
- 95% Operating altitude 0
- 3000 m Non-operating altitude 0
- 15000 m Packaging data Package

Dimensions (Wx Dx H)229 x 483 x 381 mm Package weight 12.7kg Weight & dimensions Weight 10.4kg Width 100 mm Height 250 mm Depth 382 mm Package weight 12.7kg Other features Interface USBBattery type APCRBC123 Package

Dimensions (Wx Dx H)229 x 483 x 381 mm Nominal output voltage 230 VNominal input voltage 230 VNetworking features 10/100/1000 Base-TFiltering description UL 1449\n\n\n\nhttp://pdfs.icecat.biz/pdf/26958798-9539.pdf










...

APC Power Cords, Input Connections: IEC-320 C14, Cord Length:2 feet (0.61 meters ), Output Connections: IEC 320 C13 Feature Feature Value Cable colour Black Connector gender Male connector / Female connector Cable length 0.61 m Connector 1C13 coupler Connector 2C14 coupler Connector 1 form factor Straight Connector 2 form factor Straight Input current 10 AWeight 430 g ...

Features: rn Single input power source rn Toolless Mounting Capabilities rn Vertical Mounting Capabilities rn\n\n\n\n
...

\n\n Hot Swap Batteries for Smart-UPS\n\n \n\n Features Battery technology Sealed Lead Acid (VRLA) Product colour Black Other features Dimensions (Wx Dx H)254 x 152.4 x 96.5 mm Weight & dimensions Weight 10kg Operational conditions Operating temperature (T-T)0
- 40 &172;&136;&158;COperating relative humidity (H-H)0
- 95%\n\n\n\n

...

Guaranteed UPS compatibility\n Tested & approved to restore the performance of your APC UPS. Maintains UPS safety certifications (UL, VDE, CSA) & lifetime equipment protection policy (as applicable).\n\n Long battery life\n Designed by APC by Schneider Electric exclusively for APC UPS's for complete compatibility with the intelligent battery management system.\n\n Fully assembled for easy hot-swap installation\n APC RBCs are safe, reliable & contain a minimum number of connections saving valuable time. Because APC RBCs are hot-swappable, no network downtime is required in order to install them.\n\n Re-usable packaging with clear instructions on how to properly dispose of spent batteries.\n Convenient, easy & green.\n\n Prepaid postage to a nearby recycling partner\n Insures that almost 100% of the old battery is recycled, protecting the environment. Feature Feature Value Battery technology Sealed Lead Acid (VRLA) Product colour Black Ro HS compliance Y Certification REACH, UL, VDE, CSAWeight 10kg Width 216 mm Height 83 mm Depth 343 mm Package width 368 mm Package height 152 mm Package depth 495 mm Package weight 10.9kg Operating temperature (T-T)0
- 45 &176;CStorage temperature (T-T)-15
- 45 &176;COperating relative humidity (H-H)0
- 95% Storage relative humidity (H-H)0
- 95% Non-operating altitude 0
- 15000 m




...

Guaranteed UPS compatibility\n Tested & approved to restore the performance of your APC UPS. Maintains UPS safety certifications (UL, VDE, CSA) & lifetime equipment protection policy (as applicable).\n\n Long battery life\n Designed by APC by Schneider Electric exclusively for APC UPS's for complete compatibility with the intelligent battery management system.\n\n Fully assembled for easy hot-swap installation\n APC RBCs are safe, reliable & contain a minimum number of connections saving valuable time. Because APC RBCs are hot-swappable, no network downtime is required in order to install them.\n\n Re-usable packaging with clear instructions on how to properly dispose of spent batteries.\n Convenient, easy & green.\n\n Prepaid postage to a nearby recycling partner\n Insures that almost 100% of the old battery is recycled, protecting the environment. Feature Feature Value Battery technology Sealed Lead Acid (VRLA) Product colour Black Ro HS compliance Y Certification REACH, UL, VDE, CSAWeight 10kg Width 216 mm Height 83 mm Depth 343 mm Package width 368 mm Package height 152 mm Package depth 495 mm Package weight 10.9kg Operating temperature (T-T)0
- 45 &176;CStorage temperature (T-T)-15
- 45 &176;COperating relative humidity (H-H)0
- 95% Storage relative humidity (H-H)0
- 95% Non-operating altitude 0
- 15000 m




...