35875 Feature Feature Value Cable colour Black Connector gender Male connector / Female connector Cable length 2 m Connector 1C14 coupler Connector 2C19 coupler Connector 1 form factor Straight Connector 2 form factor Straight Ro HS compliance Y Certification PEP, EOLIInput current 10 AWeight 280 g Quantity per pack 1 pc (s) Package width 102 mm Package depth 102 mm Package height 305 mm Package weight 360 g ...

35875 Feature Feature Value Cable colour Black Connector gender Male connector / Female connector Cable length 2 m Connector 1C14 coupler Connector 2C19 coupler Connector 1 form factor Straight Connector 2 form factor Straight Ro HS compliance Y Certification PEP, EOLIInput current 10 AWeight 280 g Quantity per pack 1 pc (s) Package width 102 mm Package depth 102 mm Package height 305 mm Package weight 360 g ...

Best value UPS with Battery Backup & Surge Protection for Electronics & Computers.\n\n- Best value UPS with Battery ...

137739 Feature Feature Value UPS topology Line-Interactive Output power capacity 2000 VAOutput power 1400 WWaveform Sine Input operation voltage (min)157 VInput operation voltage (max)303 VInput frequency 45/65 Hz Output operation voltage (min)230 VOutput operation voltage (max)230 VOutput frequency 50/60 Hz Output voltage regulation-1
- 1% Automatic Voltage Regulation (AVR)YMaximum current 20 ACrest factor 3:1 Noise level 45 d B Power protection features Overload, Short circuit Audible alarm (s)YAudible alarm modes Alarm when on battery, Low battery alarm, Overload alarm AC outlet types IEC 320AC outlets quantity 6 AC outlet (s)USB port Y Battery technology Sealed Lead Acid (VRLA) Battery capacity 7 Ah Battery voltage 12 VNumber of batteries supported 4 Battery life (max)5 year (s) Battery recharge time 4 h Cold start Y Form factor Tower Product colour Black LED indicators Y Display LCDInternational Protection (IP) code IP20 Operating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-10
- 40 &176;COperating relative humidity (H-H)0
- 95% Storage relative humidity (H-H)0
- 95% Operating altitude 0
- 3000 m Width 180 mm Depth 455 mm Height 240 mm Weight 23.5kg Battery width 32.6 cm Battery depth 60.1 cm Battery height 41 cm Battery weight 26.9kg Cables included USB cable Manual Y





...

137732 Feature Feature Value UPS topology Line-Interactive Output power capacity 750 VAOutput power 525 WWaveform Sine Input operation voltage (min)160 VInput operation voltage (max)295 VInput frequency 45/65 Hz Output operation voltage (min)230 VOutput operation voltage (max)230 VOutput frequency 50/60 Hz Output voltage regulation-1
- 1% Automatic Voltage Regulation (AVR)YMaximum current 8 ACrest factor 3:1 Noise level 45 d B Power protection features Overload, Short circuit Audible alarm (s)YAudible alarm modes Alarm when on battery, Low battery alarm, Overload alarm AC outlet types IEC 320AC outlets quantity 6 AC outlet (s)USB port Y Battery technology Sealed Lead Acid (VRLA) Battery capacity 7 Ah Battery voltage 12 VNumber of batteries supported 2 Battery life (max)5 year (s) Battery recharge time 4 h Cold start Y Form factor Tower Product colour Black LED indicators Y Display LCDInternational Protection (IP) code IP20 Operating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-10
- 40 &176;COperating relative humidity (H-H)0
- 95% Storage relative humidity (H-H)0
- 95% Operating altitude 0
- 3000 m Width 160 mm Depth 410 mm Height 220 mm Weight 13.6kg Battery width 27.2 cm Battery depth 50.8 cm Battery height 33.9 cm Battery weight 16.6kg Cables included USB cable Manual Y





...

Easy Metered Rack Power Distribution Units (PDU) provide real-time remote monitoring & power management of connected loads in server rack & network rack solutions. Going beyond the average power strip, Easy PDU offers User-defined alarms to warn of potential circuit overloads before critical IT failures occur.nn Remote Management Capabilitiesn Full-featured network management interfaces that provide standards-based management via Web, SNMP, & Telnet. Allows users to access, configure, & manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly & easily upgrade the firmware via network download to installed units for future product enhancements.nn Availabilitynn Alarm Thresholdsn Define alarm thresholds in order to avoid overloaded circuits. Network & visual alarms inform the user of possible problems.nn Remote Management Capabilitiesn Full-featured network management interfaces that provide standards-based management via Web, SNMP, & Telnet. Allows users to access, configure, & manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly & easily upgrade the firmware via network download to installed units for future product enhancements.nn Local Current Monitoring Displayn The aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only)nn Load indicator LEDn Indicates overload & warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits.nn Flash Upgradeablen Quickly & easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released.nn Agilitynn Single input power sourcen Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. saves your valuable time & money during installation by using one branch whip & standard connections.nn Rack-Mountablen
Includes: horizontal, vertical, & toolless-mount varieties. Puts power where it is needed most
- in the racks near the equipment.\n\n\n\n Product ID: EPDU1016M\n\n\n\n\n\n Model: EPDU1016M\n\n Datasheet: http://objects.icecat.biz/objects/mmo_77945743_1582011618_0364_570.pdf\n\n Additional Datasheet: http://objects.icecat.biz/objects/mmo_77945743_1597325871_5186_11876.pdf\n\n Manual: http://objects.icecat.biz/objects/mmo_77945743_1582011626_6726_19031.pdf\n\n\n\n\n\n\n\n

...

Remote Individual Outlet Controln Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime & avoid travel time to equipment).nn Remote Management Capabilitiesn Full-featured network management interfaces that provide standards-based management via Web, SNMP, & Telnet. Allows users to access, configure, & manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly & easily upgrade the firmware via network download to installed units for future product enhancements.nn Network port sharingn Allows four rack PDUs to be connected using In & Out ports so that only one network connection is necessary.nn Network Management Capabilitiesn Full-featured network management interfaces that provide standards-based management via Web, SNMP, & Telnet. Allows users to access, configure, & manage rack PDUs from remote locations to save valuable time. Associated with this feature is the ability to quickly & easily upgrade the firmware via network download to installed units for future product enhancements.nn Remote Individual Outlet Controln Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime & avoid travel time to equipment).nn Power Delaysn Allows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits & dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly.nn Flash Upgradeablen Quickly & easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released.nn Local Current Monitoring Displayn The aggregate current draw per power distribution unit is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip.\n\n\n\n Product ID: EPDU1016S\n\n\n\n\n\n Model: EPDU1016S\n\n Datasheet: http://objects.icecat.biz/objects/mmo_79744254_1593708119_7999_6617.pdf\n\n Additional Datasheet: http://objects.icecat.biz/objects/mmo_79744254_1597325510_3005_8415.pdf\n\n Manual: http://objects.icecat.biz/objects/mmo_79744254_1597325428_2388_1284.pdf\n\n\n\n\n\n\n\n ...

Remote Individual Outlet Controln Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime & avoid travel time to equipment).nn Remote Management Capabilitiesn Full-featured network management interfaces that provide standards-based management via Web, SNMP, & Telnet. Allows users to access, configure, & manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly & easily upgrade the firmware via network download to installed units for future product enhancements.nn Network port sharingn Allows four rack PDUs to be connected using In & Out ports so that only one network connection is necessary.nn Network Management Capabilitiesn Full-featured network management interfaces that provide standards-based management via Web, SNMP, & Telnet. Allows users to access, configure, & manage rack PDUs from remote locations to save valuable time. Associated with this feature is the ability to quickly & easily upgrade the firmware via network download to installed units for future product enhancements.nn Remote Individual Outlet Controln Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime & avoid travel time to equipment).nn Power Delaysn Allows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits & dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly.nn Flash Upgradeablen Quickly & easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released.nn Local Current Monitoring Displayn The aggregate current draw per power distribution unit is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip.\n\n\n\n Product ID: EPDU1016S\n\n\n\n\n\n Model: EPDU1016S\n\n Datasheet: http://objects.icecat.biz/objects/mmo_79744254_1593708119_7999_6617.pdf\n\n Additional Datasheet: http://objects.icecat.biz/objects/mmo_79744254_1597325510_3005_8415.pdf\n\n Manual: http://objects.icecat.biz/objects/mmo_79744254_1597325428_2388_1284.pdf\n\n\n\n\n\n\n\n ...

Easy Basic PDU provide reliable rack power distribution units (PDU) that offer more than a power strip for server rack & network rack solutions.nn Toolless Rack Mounting Capabilitiesn Server cases do not require additional tools to mount into Net Shelter Enclosures, which allows the users to quickly & easily mount units in the rear of the enclosure.nn Zero U Rack Mounting Abilitiesn Vertical mounting capabilities allow users to mount the units in a rack or enclosure without expending valuable rack space.nn Agilitynn Rack-Mountablen
Includes: horizontal, vertical, & toolless-mount varieties. Puts power where it is needed most
- in the racks near the equipment.nn Wide range of input & output connectionsn Product family

Includes:: a variety of input & output connections to distribute 120V, 208V, or 230V power to multiple outlets. Having a variety of inputs & outputs allow users to adapt to varying power requirements. APC offers units that bring up to 14.4k W using a single branch whip.nn Single input power sourcen Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. saves your valuable time & money during installation by using one branch whip & standard connections.nn Cost Savingsnn Low Cost Power Distributionn Provides a number of outlets to bring power to rack equipment at an affordable price.\n\n\n\n Product ID: EPDU1116B\n\n\n\n\n\n Model: EPDU1116B\n\n\n\n\n\n\n\n\n\n\n\n\n\n



...

Product ID: EPDU1116S\n\n\n\n\n\n Model: EPDU1116S\n\n\n\n Additional Datasheet: http://objects.icecat.biz/objects/mmo_79744279_1597754476_0027_3133.pdf&pipe;http://objects.icecat.biz/objects/mmo_79744279_1597754540_8459_13667.pdf\n\n Manual: http://objects.icecat.biz/objects/mmo_79744279_1597754451_6202_13629.pdf\n\n\n\n\n\n\n\n ...