Cable management accessories, thermal management accessories, shelving, mounting hardware, keyboards, keyboard drawers, & stabilization accessories required for a complete enclosure solution.\n
Features: \n Expanded Cable Management \n Facilitates rear/vertical cable management \n Occupies 0U of rack space \n Organizes data & power cables \n Tool-less mounting \n Feature Feature Value Weight 1.82kg Package

Dimensions (Wx Dx H)140 x 787 x 64 mm Package weight 2.09kg Dimensions (Wx Dx H)140 x 787 x 64 mm


...

Cable management accessories, thermal management accessories, shelving, mounting hardware, keyboards, keyboard drawers, & stabilization accessories required for a complete enclosure solution.\n
Features: \n Expanded Cable Management \n Facilitates rear/vertical cable management \n Occupies 0U of rack space \n Organizes data & power cables \n Tool-less mounting \n Feature Feature Value Weight 1.82kg Package

Dimensions (Wx Dx H)140 x 787 x 64 mm Package weight 2.09kg Dimensions (Wx Dx H)140 x 787 x 64 mm


...

Horizontal cable management accessory to organize data cable layout within an enclosure or a rack.\n\n
Includes:: Double-sided
...

Horizontal cable management accessory to organize data cable layout within an enclosure or a rack.\n\n
Includes:: Double-sided
...

Horizontal Cable Manager, 2U x 6" Deep with Cable Tie-off bottom plate, Single-Sided with Cover\n\n High density 2U, 6-in (150-mm) deep, horizontal cable manager with cover. Features cable access slots with pre-installed brush strips in the backplate for front to back cable pass-through & a bottom plate with features for additional cable tie-off & routing.\n\n Cable protection\n Smooth plastic fingers provide proper bend radius.\n\n Trouble-free access\n Covers with snap hinges provide trouble-free access to cables.\n\n Cable passthrough & air containment\n Pre-installed brush strips provide air containment & accessibility from the front to the rear of the enclosure.\n\n Double-sided capable\n Horizontal cable managers with 6" deep cable fingers include double-sided configuration hardware to install (2) alike horizontal cable managers back-to-back for double-sided applications.\n\n High capacity cable finger design\n Cable managers feature high capacity slim cable fingers to provide maximum capacity at every rackspace unit & a rigid design to decrease deflection when cables are routed in/out of the cable manager channel.\n\n Cable tie-off bottom plate\n Horizontal cable manager bottom plate provides cable tie-off features for bundling cable with toolless hook-&-loop cable managers (AR8621).\n\n Horizontal cable routing front-to-back\n Pass-through holes & mounting slots support horizontal cable troughs for front-to-back cable pass-through using cable management accessory AR8016ABLKFeature Feature Value Product colour Black Width 482 mm Depth 165 mm Height 88 mm Weight 1.2kg Package width 520 mm Package depth 200 mm Package height 152 mm Package weight 1.5kg Rack mounting 2U ...

Green mode\n Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.\n\n Battery failure notification\n Provides early-warning fault analysis on batteries enabling timely preventive maintenance\n\n Power-saving outlets\n Automatically cuts power to idle equipment to conserve electricity.\n\n Resettable circuit breaker\n Easy recovery from overloads; no need to replace a fuse.\n\n Extendable Run Time\n Additional batteries can be added to provide power to the load for an extended period of time in the event of utility supply failure.\n\n Battery-protected & surge-only outlets\n Reserves power capacity & run time for connected equipment that require battery back-up while providing surge only protection for less critical equipment\n\n Cold-start capable\n Provides temporary battery power when the utility power is out.\n\n Serial Connectivity\n Use any Home Automation network to monitor & control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note 102. Crestron & AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.\n\n Hot-swappable batteries\n Ensures clean, uninterrupted power to protected equipment while batteries are being replaced\n\n Disconnected battery notification\n Warns when a battery is not available to provide backup power.\n\n Dataline Surge Protection\n Provides protection of connected equipment from power surges on the data lines.\n\n Automatic self-test\n Periodic battery self-test ensures early detection of a battery that needs to be replaced.\n\n Adjustable voltage-transfer points\n Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation. Feature Feature Value UPS topology Line-Interactive Output power capacity 1500 VAOutput power 865 WWaveform Sine Input operation voltage (min)156 VInput operation voltage (max)300 VInput frequency 50/60 Hz Output frequency regulation 50/60 Hz Automatic Voltage Regulation (AVR)YSurge energy rating 441 JHold time (min)10 ms Hold time (max)12 ms Efficiency 98.9% Crest factor 3:1 Noise level 45 d B Surge protection Y Surge protection features Digital Subscriber Line (DSL), Fax, Modem, Network, Telephone Audible alarm (s)YAudible alarm modes Low battery alarm, Overload alarm AC outlet types C13 coupler Power plug C14 coupler AC outlets quantity 10 AC outlet (s) Number of output IEC jumpers 2USB port Y Battery technology Sealed Lead Acid (VRLA) Battery capacity 187 VAh Typical backup time at full load 3.7 min Typical backup time at half load 12.4 min Battery life (max)5 year (s) Battery recharge time 8 h Hot-swap battery Y Automatic battery test Y Cold start Y Replacement battery cartridge APCRBC124 Product colour Black Display LCDEnergy Star certified Y Ro HS compliance Y Certification A-tick, C-tick, CE, GOST, GS Mark, Telepermit, TUV, REACH, PEP, EOLI, NEMKO-GSOperating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-15
- 40 &176;COperating relative humidity (H-H)0
- 95% Storage relative humidity (H-H)0
- 95% Operating altitude 0
- 9000 m Non-operating altitude 0
- 15000 m Width 112 mm Depth 380 mm Height 301 mm Weight 12.7kg Cables included Phone (RJ-11), USB cable Manual Y Warranty card Y Software CDYBundled software Power Chute Personal Edition Package width 238 mm Package depth 488 mm Package height 387 mm Package weight 14.3kg Quantity per pallet 20 pc (s) Quantity per master (outer) case 1 pc (s) Nominal output voltage 230 VNominal input voltage 230 VPackaging content 1x Detachable IEC Power Cord





...

Battery failure notification\n Provides early-warning fault analysis on batteries enabling timely preventive maintenance\n\n Resettable circuit breaker\n Easy recovery from overloads; no need to replace a fuse.\n\n Boost Automatic Voltage Regulation (AVR)\n Preserves battery life & maximizes runtime by correcting low voltages without discharging the battery.\n\n Automatic self-test\n Periodic battery self-test ensures early detection of a battery that needs to be replaced.\n\n Adjustable voltage-transfer points\n Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.\n\n Adjustable voltage sensitivity\n Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.\n\n Audible alarms\n Provides notification of changing utility power & UPS power conditions\n\n Safety-agency approved\n Ensures the product has been tested & approved to work safely with the connected service provider equipment & within the specified environment.\n\n LED status indicators\n Quickly understand unit & power status with visual indicators. Feature Feature Value UPS topology Line-Interactive Output power capacity 500 VAOutput power 300 WWaveform Sine Input operation voltage (min)160 VInput operation voltage (max)280 VInput frequency 45/65 Hz Output frequency regulation 50 Hz Automatic Voltage Regulation (AVR)YMaximum current 2 ASurge energy rating 273 JHold time (min)6 ms Hold time (max)10 ms Efficiency 98.7% Noise level 45 d B Surge protection Y Audible alarm (s)YAudible alarm modes Low battery alarm, Overload alarm AC outlet types C13 coupler Power plug C14 coupler AC outlets quantity 3 AC outlet (s) Number of output IEC jumpers 1 Battery technology Sealed Lead Acid (VRLA) Battery capacity 7.2 Ah Battery capacity 47 VAh Battery voltage 12 VTypical backup time at full load 1.3 min Typical backup time at half load 7.6 min Automatic battery test Y Form factor Tower Product colour Black Cable length 1.83 m LED indicators Battery replacement Energy Star certified Y Ro HS compliance Y Certification CE, REACH, PEP, EOLIOperating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-15
- 45 &176;COperating relative humidity (H-H)0
- 95% Storage relative humidity (H-H)0
- 95% Operating altitude 0
- 3000 m Non-operating altitude 0
- 15000 m Width 115 mm Depth 213 mm Height 185 mm Weight 5.2kg Manual Y Package width 190 mm Package depth 291 mm Package height 257 mm Package weight 5.68kg Quantity per pallet 60 pc (s) Quantity per master (outer) case 2 pc (s) Nominal output voltage 230 VNominal input voltage 230 V





...

Battery failure notification\n Provides early-warning fault analysis on batteries enabling timely preventive maintenance\n\n Resettable circuit breaker\n Easy recovery from overloads; no need to replace a fuse.\n\n Boost Automatic Voltage Regulation (AVR)\n Preserves battery life & maximizes runtime by correcting low voltages without discharging the battery.\n\n Automatic self-test\n Periodic battery self-test ensures early detection of a battery that needs to be replaced.\n\n Adjustable voltage-transfer points\n Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.\n\n Adjustable voltage sensitivity\n Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.\n\n Audible alarms\n Provides notification of changing utility power & UPS power conditions\n\n Safety-agency approved\n Ensures the product has been tested & approved to work safely with the connected service provider equipment & within the specified environment.\n\n LED status indicators\n Quickly understand unit & power status with visual indicators. Feature Feature Value UPS topology Line-Interactive Output power capacity 500 VAOutput power 300 WWaveform Sine Input operation voltage (min)160 VInput operation voltage (max)280 VInput frequency 45/65 Hz Output frequency regulation 50 Hz Automatic Voltage Regulation (AVR)YMaximum current 2 ASurge energy rating 273 JHold time (min)6 ms Hold time (max)10 ms Efficiency 98.7% Noise level 45 d B Surge protection Y Audible alarm (s)YAudible alarm modes Low battery alarm, Overload alarm AC outlet types C13 coupler Power plug C14 coupler AC outlets quantity 3 AC outlet (s) Number of output IEC jumpers 1 Battery technology Sealed Lead Acid (VRLA) Battery capacity 7.2 Ah Battery capacity 47 VAh Battery voltage 12 VTypical backup time at full load 1.3 min Typical backup time at half load 7.6 min Automatic battery test Y Form factor Tower Product colour Black Cable length 1.83 m LED indicators Battery replacement Energy Star certified Y Ro HS compliance Y Certification CE, REACH, PEP, EOLIOperating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-15
- 45 &176;COperating relative humidity (H-H)0
- 95% Storage relative humidity (H-H)0
- 95% Operating altitude 0
- 3000 m Non-operating altitude 0
- 15000 m Width 115 mm Depth 213 mm Height 185 mm Weight 5.2kg Manual Y Package width 190 mm Package depth 291 mm Package height 257 mm Package weight 5.68kg Quantity per pallet 60 pc (s) Quantity per master (outer) case 2 pc (s) Nominal output voltage 230 VNominal input voltage 230 V





...

The re-invention of the most relied upon desktop UPS in history: the Back-UPS!\n The Back-UPS CS provides professional-grade power protection for office & home office systems. Battery powered & surge protected power outlets, built-in phone/fax/modem line (DSL compatible) protection, safe system shutdown software with sophisticated power management features & pro-active audio-visual status indicators ensure office systems & their valuable data are protected from dangerous power surges, spikes & blackouts. Serial or USB (Universal Serial Bus) connectivity gives users more flexibility making installation quicker & easier. Easy access to a hot-swappable, user-replaceable battery also makes servicing the Back-UPS CS hassle-free. These features along with its classic styling make the Back-UPS CS a perfect choice for protecting your important office & home office systems.\n\n Key
Features:\n- Audible alarms \n- Automatic restart of loads after UPS shutdown \n- Automatic self-test \n- Battery replacement without tools \n- Battery-protected & surge-only outlets \n- Dataline Surge Protection \n- Hot-swappable batteries \n- LED status indicators \n- Power conditioning \n- Resettable circuit breakers \n- Safety-agency approved \n- Transformer-block spaced outlets \n- User-replaceable batteries Feature Feature Value UPS topology Standby (Offline) Output power capacity 350 VAOutput power 210 WInput frequency 50/60 Hz Output frequency regulation 47
- 63 Hz Maximum current 7 ASurge energy rating 310 JHold time (min)6 ms Hold time (max)10 ms Efficiency 98.6% Surge protection Y Surge protection features Digital Subscriber Line (DSL), Fax, Modem, Telephone Power protection features Overload Audible alarm (s)YAudible alarm modes Low battery alarm, Overload alarm AC outlet types C13 coupler Power plug C14 coupler AC outlets quantity 4 AC outlet (s) Number of output IEC jumpers 2USB port Y Battery technology Sealed Lead Acid (VRLA) Battery capacity 7 Ah Battery capacity 116 VAh Battery voltage 12 VTypical backup time at full load 8.6 min Typical backup time at half load 22.1 min Battery life (max)6 year (s) Battery recharge time 6 h Automatic battery test Y Form factor Tower Product colour Beige Cable length 1.83 m LED indicators Battery replacement Energy Star certified Y Ro HS compliance Y Certification C-tick, CE, EN 50091-1, EN 50091-2, GOST, VDE, PEP, EOLIOperating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-15
- 45 &176;COperating relative humidity (H-H)0
- 95% Storage relative humidity (H-H)0
- 95% Operating altitude 0
- 3000 m Non-operating altitude 0
- 15000 m Width 91 mm Depth 284 mm Height 165 mm Weight 6.32kg Cables included Phone (RJ-11), USB cable Quick installation guide Y Warranty card Y Software CDYBundled software Power Chute Personal Edition Package width 241 mm Package depth 368 mm Package height 178 mm Package weight 7.05kg Quantity per pallet 48 pc (s) Nominal output voltage 230 VNominal input voltage 230 VFiltering Y







...

The re-invention of the most relied upon desktop UPS in history: the Back-UPS!\n The Back-UPS CS provides professional-grade power protection for office & home office systems. Battery powered & surge protected power outlets, built-in phone/fax/modem line (DSL compatible) protection, safe system shutdown software with sophisticated power management features & pro-active audio-visual status indicators ensure office systems & their valuable data are protected from dangerous power surges, spikes & blackouts. Serial or USB (Universal Serial Bus) connectivity gives users more flexibility making installation quicker & easier. Easy access to a hot-swappable, user-replaceable battery also makes servicing the Back-UPS CS hassle-free. These features along with its classic styling make the Back-UPS CS a perfect choice for protecting your important office & home office systems.\n\n Key
Features:\n- Audible alarms \n- Automatic restart of loads after UPS shutdown \n- Automatic self-test \n- Battery replacement without tools \n- Battery-protected & surge-only outlets \n- Dataline Surge Protection \n- Hot-swappable batteries \n- LED status indicators \n- Power conditioning \n- Resettable circuit breakers \n- Safety-agency approved \n- Transformer-block spaced outlets \n- User-replaceable batteries Feature Feature Value UPS topology Standby (Offline) Output power capacity 350 VAOutput power 210 WInput frequency 50/60 Hz Output frequency regulation 47
- 63 Hz Maximum current 7 ASurge energy rating 310 JHold time (min)6 ms Hold time (max)10 ms Efficiency 98.6% Surge protection Y Surge protection features Digital Subscriber Line (DSL), Fax, Modem, Telephone Power protection features Overload Audible alarm (s)YAudible alarm modes Low battery alarm, Overload alarm AC outlet types C13 coupler Power plug C14 coupler AC outlets quantity 4 AC outlet (s) Number of output IEC jumpers 2USB port Y Battery technology Sealed Lead Acid (VRLA) Battery capacity 7 Ah Battery capacity 116 VAh Battery voltage 12 VTypical backup time at full load 8.6 min Typical backup time at half load 22.1 min Battery life (max)6 year (s) Battery recharge time 6 h Automatic battery test Y Form factor Tower Product colour Beige Cable length 1.83 m LED indicators Battery replacement Energy Star certified Y Ro HS compliance Y Certification C-tick, CE, EN 50091-1, EN 50091-2, GOST, VDE, PEP, EOLIOperating temperature (T-T)0
- 40 &176;CStorage temperature (T-T)-15
- 45 &176;COperating relative humidity (H-H)0
- 95% Storage relative humidity (H-H)0
- 95% Operating altitude 0
- 3000 m Non-operating altitude 0
- 15000 m Width 91 mm Depth 284 mm Height 165 mm Weight 6.32kg Cables included Phone (RJ-11), USB cable Quick installation guide Y Warranty card Y Software CDYBundled software Power Chute Personal Edition Package width 241 mm Package depth 368 mm Package height 178 mm Package weight 7.05kg Quantity per pallet 48 pc (s) Nominal output voltage 230 VNominal input voltage 230 VFiltering Y







...