Ethernet media converter enable service providers to use fiber cabling to extend the size of UTP networks. Supporting ST fiber connector, this converter can be used to extend networks with up to 2km of fiber.\n\n\n\n Product ID: AT-MC101XL-60\n\n\n\n\n\n Model: AT-MC101XL\n\n\n\n\n\n\n\n\n\n\n\n\n\n ...

Fibre connectionsrn The Allied Telesyn range of Fast Ethernet Media converters provides a complete family of conversion devices, allowing users to extend the size of UTP networks with the use of fibre cabling. Supporting both SC & ST fibre connectors, these converters can be used to extend networks with up to 2km of fibre.rnrn Auto-negotiation & Missing Link&132;&162; rn The Missing Link&132;&162; feature enables the fibre optic ports on the media converter to pass the &152; Link&153; status of their connections to eachrnother. When the media converter detects a problem with one of the ports, such as the loss of connection to an end-node, the media converter shuts down the connection to the other port, thus notifying the node that the connection has been lost.rnrn Simple installation rn Both media converters feature an internal MDI/MDI-X switch, allowing the converter to be connected to either a PC, hub or switchrnwith a simple UTP cable. The media converters also allow the installer to test the integrity of fibre connection, by forcing the converters to communicate over the fibre cable. This &152; Link Test&153; feature allows installers to check for cable faults without the need for expensive fibre-optic test equipment.rnrn Standalone or rackmounted rn Each small media converter is powered by an external power supply unit for use in standalone applications. Where multiple media converters are being used, up to 12 standalone devices can be inserted into a lowrncost rackmount chassis, allowing all the converters to be powered by a single internal power supply. In critical applications, a secondrnload sharing internal power supply can be installed into the rackmount chassis.\n\n\n\n Product ID: AT-MC102XL-60\n\n\n\n\n\n Model: AT-MC102XL\n\n\n\n\n\n\n\n\n\n\n\n\n\n ...

The Allied Telesis MMC200 Series of Fast Ethernet mini media converters leverages its smaller size to not only help the environment with a small carbon footprint, but also to save space nin its working environment. Despite its compact size, the MMC200 Series delivers all the power & functionality of standard size media converters.\n\n\n\n Product ID: AT-MMC200/LC-60\n\n\n\n\n\n Model: AT-MMC200/LC\n\n Datasheet: http://objects.icecat.biz/objects/mmo_33647825_1512487537_1371_12698.pdf\n\n\n\n\n\n\n\n\n\n\n\n ...

The Allied Telesis MMC200 Series of Fast Ethernet mini media converters leverages its smaller size to not only help the environment with a small carbon footprint, but also to save space nin its working environment. Despite its compact size, the MMC200 Series delivers all the power & functionality of standard size media converters.\n\n\n\n Product ID: AT-MMC200/LC-60\n\n\n\n\n\n Model: AT-MMC200/LC\n\n Datasheet: http://objects.icecat.biz/objects/mmo_33647825_1512487537_1371_12698.pdf\n\n\n\n\n\n\n\n\n\n\n\n ...

This standalone mini media & rate converter features 10/100/1000T to 1000SX conversion with a multi-mode LC fiber connector & supports from 220 m to 500 m. It is compatible with the MMCR18 rack-mount chassis.\n\n\n\n Product ID: AT-MMC2000/LC-960\n\n\n\n\n\n Model: AT-MMC2000/LC-960\n\n Datasheet: http://objects.icecat.biz/objects/mmo_75782935_1590054020_7041_12463.pdf\n\n\n\n\n\n\n\n\n\n\n\n ...

Powering Remote Devicesn Allied Telesis PC200/2000 Series media converters are the ideal solution for powering remote devices such as IP phones, video cameras, wireless access points, etc., which are morenthan 100m from a Power over Ethernet switch.nn The PC2000/SP features a 100MB or 1000MB SFP port & a 10/100/1000T twisted-pair port. Allied Telesis offers a wide variety of SFPs featuring multimode, single mode & Bi Di optics.nn The fixed fiber-optic port PC200x models features an SC connector for 100FX & 1000SX or LC connector for the 1000SX, capable of operating at a distance of up to two kilometers over multi-mode fiber. The twisted-pair port has an RJ-45 connector with a maximum operating distance of 100 meters. In addition to transmitting data, the twisted-pair port also injects power down the cable, allowing a remote Po E+ Powered Device to operate without the need of any additional power source. All Po E+ Devices (IEEE802.3at compliant) are supported, as the PC200x Po E+ Series can deliver a full 30W of power to the remote device.nn Remote Power Cyclen The PC200/2000 Series offers feature where when the fiber port is dropped the TX Po E+ port will cycle power. It allows a remote administrator to login in a switch & disable the switch nport in which the PC200/2000 Series is attached & will have the remote Po E+ device to lose power. This can be useful when an administrator needs to reset a remote device withoutnactually physical going to the location.nn VLAN Supportn Many backbone switch products support the industry-standard IEEE 802.1Q

Specification for Virtual LANs (VLANs) that sends extra-long data packets on the network. PC200/2000n Series switches are fully compatible with these long packets, enabling them to be used in modern networks. Switches not supporting this feature will discard these extra-long packets, nmaking them unsuitable for modern networks. nn Small & Flexiblen The small size & internal power supply of the PC200/2000 Series allows them to be used almost anywhere. nn Smart Missing Link TM (SML)n The Smart Missing Link (SML) feature monitors network connections & provides notification when network segments fail, allowing network managers to quickly identify the source & location of failed segments & minimize downtime.\n\n\n\n Product ID: 990-005116-60\n\n\n\n\n\n Model: AT-PC2000/LC-60\n\n Datasheet: https://www.alliedtelesis.com/products/pc 2000\n\n\n\n\n\n\n\n\n\n\n\n

...

Powering Remote Devicesn Allied Telesis PC200/2000 Series media converters are the ideal solution for powering remote devices such as IP phones, video cameras, wireless access points, etc., which are morenthan 100m from a Power over Ethernet switch.nn The PC2000/SP features a 100MB or 1000MB SFP port & a 10/100/1000T twisted-pair port. Allied Telesis offers a wide variety of SFPs featuring multimode, single mode & Bi Di optics.nn The fixed fiber-optic port PC200x models features an SC connector for 100FX & 1000SX or LC connector for the 1000SX, capable of operating at a distance of up to two kilometers over multi-mode fiber. The twisted-pair port has an RJ-45 connector with a maximum operating distance of 100 meters. In addition to transmitting data, the twisted-pair port also injects power down the cable, allowing a remote Po E+ Powered Device to operate without the need of any additional power source. All Po E+ Devices (IEEE802.3at compliant) are supported, as the PC200x Po E+ Series can deliver a full 30W of power to the remote device.nn Remote Power Cyclen The PC200/2000 Series offers feature where when the fiber port is dropped the TX Po E+ port will cycle power. It allows a remote administrator to login in a switch & disable the switch nport in which the PC200/2000 Series is attached & will have the remote Po E+ device to lose power. This can be useful when an administrator needs to reset a remote device withoutnactually physical going to the location.nn VLAN Supportn Many backbone switch products support the industry-standard IEEE 802.1Q

Specification for Virtual LANs (VLANs) that sends extra-long data packets on the network. PC200/2000n Series switches are fully compatible with these long packets, enabling them to be used in modern networks. Switches not supporting this feature will discard these extra-long packets, nmaking them unsuitable for modern networks. nn Small & Flexiblen The small size & internal power supply of the PC200/2000 Series allows them to be used almost anywhere. nn Smart Missing Link TM (SML)n The Smart Missing Link (SML) feature monitors network connections & provides notification when network segments fail, allowing network managers to quickly identify the source & location of failed segments & minimize downtime.\n\n\n\n Product ID: 990-005117-60\n\n\n\n\n\n Model: AT-PC2000/SC-60\n\n Datasheet: http://objects.icecat.biz/objects/mmo_37099115_1500189955_2147_25002.pdf\n\n\n\n\n\n\n\n\n\n\n\n

...

Our media converters allow you to connect disparate cable types in your network. Media conversion offers you the ability to: &187; Extend network distances by adding fiber only where it is needed &187; Add new devices without replacing costly cable &187; Keep pace with changing technology &187; Integrate high-bandwidth devices into the network &187; Full 15.4W POE support.\n\n\n\n Product ID: AT-PC232/POE-30\n\n\n\n\n\n Model: AT-PC232/POE\n\n\n\n\n\n\n\n\n\n\n\n\n\n ...

Additional 250W AC system power supply\n\n\n\n Product ID: AT-PWR250-30\n\n\n\n\n\n Model: AT-PWR250-30\n\n\n\n\n\n\n\n\n\n\n\n\n\n ...

Additional 250W AC system power supply\n\n\n\n Product ID: AT-PWR250-30\n\n\n\n\n\n Model: AT-PWR250-30\n\n\n\n\n\n\n\n\n\n\n\n\n\n ...