HDMI 2.0 EDID Emulator Features Type HDMI Adapters & Emulators Colour Black ...

HDMI 2.0 EDID Emulator HDCP 2.2 \n\n The Lindy HDMI 2.0 EDID Emulator Adapter is designed for systems that require EDID signals to be continuously provided without interruption & helps overcome EDID related problems which can occur when using AV/KVM Extenders Switches & Splitters. The Emulator can solve a host of compatibility problems when using mixed equipment especially extenders. With support for resolutions up to Ultra HD 4K 60 Hz & with the ability to pass "through HDCP 2.2 content the Emulator is suitable for use with the very latest PC & AV applications.\n\n Some computer systems KVM switches & digital video signage systems may interrupt the flow of EDID data or may not be able to pass this information directly back to the video card&0s output port. This adapter can be used to quickly & easily clone the EDID data from a HDMI display so that the graphics card has direct access to the correct data from the display the cloning process takes less than 10 seconds!\n\n It is also possible to use the Emulator without cloning a display as it comes complete with preset EDID data for the most commonly used resolution/timing combinations please see the Technical Information section for a full breakdown\n\n&162; Supports EDID learning or Preset Emulation\n&162; 15 Pre-set EDID modes with blocks for AV & PC applications\n&162; Supports resolutions up to Ultra HD 4K 60 Hz including HDCP 2.2 pass-through \n&162; Powered via HDMI source interface\n&162; 2 Year Warranty Features Type HDMI Adapters & Emulators Colour Black ...

HDMI 2.0 EDID Emulator\n\n The Lindy HDMI 2.0 EDID Emulator Adapter is designed for systems that require EDID signals to be continuously provided without interruption & helps overcome EDID related problems which can occur when using AV/KVM Extenders Switches & Splitters. It can also be used in place of a monitor to keep the graphics card of a PC or Server awake for remote access via IP. With support for resolutions up to Ultra HD 4K 60 Hz (via cloning) including High-Dynamic Range & with the ability to pass"through HDCP 2.2 content the Emulator is suitable for use with the very latest PC & AV applications.\n\n Some computer systems KVM switches & digital video signage systems may interrupt the flow of EDID data or may not be able to pass this information directly back to the video card&0s output port. This adapter can be used to quickly & easily clone the EDID data from a HDMI display so that the graphics card has direct access to the correct data from the display the cloning process takes less than 10 seconds!\n\n It is also possible to use the Emulator without cloning a display as it comes complete with preset EDID data for the most commonly used resolution/timing combinations please see the Technical Information section for a full breakdown.\n\n&162; Continuously emulates HDMI EDID information\n&162; Supports resolutions up to 3840x 2160@60 Hz including HDCP 2.2 pass-through & HDR\n&162; Uses cloned data or when this is not available stored pre-set screen resolutions/timings\n&162; Powered via HDMI Source Interface\n&162; 2 Year warranty Features Type HDMI Adapters & Emulators Colour Black ...

300m CAT5e VGA & Audio Extender This VGA Extender transmits VGA & audio signals through CAT5e network cables over distances of up to 300m when using high-quality solid core network cable.\n Easy to install the Extender system is made up of local transmitter & remote receiver units that are connected together with CAT5e cable (not included) high quality solid core installation cable is recommended. The local transmitter unit connects to the computer system&0s VGA port with a VGA output available to connect a local monitor while the receiver unit connects to your remote monitor or projector.\n The extender

Includes:: both Gain & Skew controls to allow you to adjust the brightness & sharpness of the picture according to your requirement. An optional skew compensation unit (like LINDY No. 32766) can be used to correct colour shadows on the display caused by different lengths of RGB signal transmission over the twisted pairs in the Cat.5e cable.\n Both Extender units are housed in sturdy metal casings making them ideally suited to use in factories & other industrial applications.\n\n&162; Extends VGA & Audio signals up to 300m with a single CAT5e cable\n&162; Supports resolutions up 1920x 1200/1600x 1200@60 Hz\n&162; Built in Gain & Skew controls\n&162; Mono audio signal support (left & right channels are combined)\n&162; 2 year warranty\n

...

2 Port VGA Splitter Pro 350 Mhz Video Resolution 2048x 1536 This compact video splitter is a very effective solution for users who need to distribute multiple video signals over long distances. It supports high resolution VGA signals of up to 2048 x 1536 (QXGA) & when using LINDY Premium Gold cables distances of up to 55m.\n\n Duplicates the video signal from your PC to 2 CRT or LCD monitors\n Provides a simultaneous display on all connected monitors\n Enhances video signals for long distance broadcasting (up to 55m)\n Power supply included\n 2 year warranty\n\n&162; Maximum Resolution: 2048 x 1536\n&162; Can be used with CRT & LCD/TFT displays\n&162; Band
Width: 350 M Hz for each port\n&162; Cascadable- several units may be daisy chained for additional displays\n&162; Connectors: 15 Way HD Male (input) & 15 Way HD Female (output)\n&162; Dimensions: 127 x 41 x 27mm (Wx Dx H)
...

Please note: This extender is only suitable for extending standard USB (Universal Serial Bus) HID keyboard & mouse signals. It is not designed to be used with wireless gaming or any other type of keyboard & mice that require their own driver.\n\n This discreet extender means that you can extend standard USB (Universal Serial Bus) HID Keyboard & Mouse signals up to 300m using standard Cat 5e/6 UTP cable. \n CAT5e/6 cable is not included with this product & must be purchased separately.\n\n&162; Connectors (on each unit)\n&162; Transmitter unit: 2 x USB (Universal Serial Bus) Type A Female for connection to your keyboard & mouse; 1 x RJ-45 socket\n&162; Receiver unit: 1 x USB (Universal Serial Bus) Type A Male for connecting to your computer; 1 x RJ-45 socket \n&162;

Dimensions (Wx Dx H): \n&162; Transmitter: 9x 7x 2.8cm\n&162; Receiver: 6x 2.5x 2.3cm plus 20cm integrated USB (Universal Serial Bus) cable

...

USB 2.0 PC Back Plate&162; Internal to External Adapter Cable (including PC Back Plate)\n&162; 1 x Type A USB (Universal Serial Bus) 2.0 Female to Type A USB (Universal Serial Bus) 2.0 Male\n&162; Compatible with USB (Universal Serial Bus) 2.0/1.1\n&162; Cable length: 30cm\n&162; 10 year warranty Features USB Type 2.0 ...

RJ-45 Female to Female UTP CAT6 (Line Coupler)&162; Extend your unshielded cables\n&162; RJ-45 Female to RJ-45 Female Unshielded Features Type Network Adapters ...

&162; High quality fibre optic cable ensures crystal clear digital audio transmission\n&162; Compatible with all SPDIF equipped devices using the Tos Link interface\n&162; Protective shell outer diameter 2.2mm
- Immune to electrical interference\n&162; Connectors: Tos Link Male to Tos Link Male\n&162; 10 year warranty\n\n Please note: These cables come with a protective dust cap on each end of the cable. Remove this before installation. Features Cable Type Toslink / Optical Length 2m Colour Black
...

Audio Adapter stereo gold-plated connectors with 1x 6.3 mm stereo jack to 1x 3.5mm jack socket for example for Earphones to Hi Fi system.\n\n&162; Stereo Audio Adapter\n&162; 3.5mm jack to 6.3mm jack\n&162; Gold Plated Connectors Features Cable Type Audio 3.5mm Colour Black ...