Trend T35A Dust Extractor M Class Medium Duty Wet & Dry 1400W 240V A professional wet & dry Class M auto-start vacuum extractor with power take off for professional use. Comes with a 5 metre hose & various attachments to cover most cleaning tasks. Available in 110V (T35AL), & 240V models.

Features: Dust class category M rated to EN60335-2-69, for dust with workplace limit values > 0.1 mg/m 3 Powerful but quiet 1400 watt silenced motor (max. 1600 watt) Power tool take off with auto-start feature of up to 2200 watts & 8 second run-on delay Auto filter shaker & blockage warning light Large 27 litre capacity impact resistant plastic container with castors Extra long 7 metre power cable Extra long five metre hose with power tool adapter HEPA (High Efficiency Particulate Air) cartridge filter with 0.3 micron filter efficiency & nylon pre-filter

Includes:: floor cleaning kit, power tool adapter, crevice tool. upholstery tool & no foam filter. Container outlet plug for ease of emptying liquids. Ideal for workshop, garage & light trade applications Comes With: 1 x HEPA Cartridge filter 1 x Polyurethane foam filter 1 x Micro filter bag 1 x 5 metre hose 1 x Floor cleaning kit with air control valve 1 x Crevice tool 1 x Upholstery tool 1 x Power tool adaptor stepped 1 x Round brush



...

Trend T35AL Dust Extractor M Class Medium Duty Wet & Dry 800W 110V A professional wet & dry Class M auto-start vacuum extractor with power take off for professional use. Comes with a 5 metre hose & various attachments to cover most cleaning tasks. Available in 110V & 240V models. Photos shown are of 240V version.

Features: Dust class category M rated to EN60335-2-69, for dust with workplace limit values > 0.1 mg/m 3 Powerful but quiet 800 watt silenced motor (max. 1800 watt) Power tool take off with auto-start feature of up to 1000 watts & 8 second run-on delay Auto filter shaker & blockage warning light Large 27 litre capacity impact resistant plastic container with castors Extra long 7 metre power cable Extra long five metre hose with power tool adapter HEPA (High Efficiency Particulate Air) cartridge filter with 0.3 micron filter efficiency & nylon pre-filter

Includes:: floor cleaning kit, power tool adapter, crevice tool. upholstery tool & no foam filter. Container outlet plug for ease of emptying liquids. Ideal for workshop, garage & light trade applications Comes With: 1 x HEPA Cartridge filter 1 x Polyurethane foam filter 1 x Micro filter bag 1 x 5 metre hose 1 x Floor cleaning kit with air control valve 1 x Crevice tool 1 x Upholstery tool 1 x Power tool adaptor stepped 1 x Round brush



...

Trend T420/35 Hinge Sinker 35mm Diameter The Trend T420/35 machine bit is typically used by kitchen furniture manufacturers for recessing circular hinges. This economy bit is supplied without scribers & used for recessing holes in melamine covered chipboard.

Features: 3.5cm Diameter Hinge Sinker with 8mm Shank Use with pillar drills only  

...

Trend T421/35X1/4TC TCT Hinge Sinking Bit 35mm Diameter

Features: These machine bits are typically used by

...

Trend T46/04X1/4TC Trimming Cutter 12.7 Mm Diameter (Shank Diameter 1/4")

Features: For trimming & bevelling

...

Trend TEMP/LUC/57 Template Set Letters 57mm Uppercase

Features: Clear plastic letter templates for writing

...

Trend TEMP/NUC/57 Number Template Set 57MM Uppercase The Trend TEMP/NUC/57 is clear plastic number templates for writing words for signs including house numbers. The templates are used with a 13mm guide bush & 8mm diameter cutter & all the numbers are nominal 57mm high. A Unibase may be required for certain makes & models of router. This set comprises of two plastic templates.

Features: Two clear plastic letter templates, numbers 1-10 Uppercase 57mm high Unibase may be required

...

Trend TR17X1/2TC Two Flute Cutter 12.7 Diameter X 50mm Cut Length (Shank Diameter 1/2")

Features: Gives

...

Trend TR37X1/2TC Two Flute Cutter 12mm Diameter The Trend TR37X1/2TC gives a clean finish to abrasive materials such as chipboard, MDF, plywood & certain hardwoods.

Features: Extra long shanks & are designed to meet the demanding needs of the professional trademen For housing, grooving & mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood & particle board. Etched

Dimensions on extra long 40mm shanks.



...

Trend TR40DX1/2TC Two Flute Cutter 15mm Diameter The Trend TR40DX1/2TC gives a clean finish to abrasive materials such as chipboard, MDF, plywood & certain hardwoods.

Features: Extra long shanks & are designed to meet the demanding needs of the professional trademen For housing, grooving & mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood & particle board. Etched

Dimensions on extra long 40mm shanks.



...