Trend PKWJ900M Laminated MDF Kitchen Worktop Jig with Carry Bag Tradesman ALL IN ONE work top jig for up to 900mm worktops. Hard wearing solid laminate 15mm thick jig that cuts both parts of the joint in 15 minutes including setting up.

Features: Left hand & right hand corners, 400mm radius peninsular joint, 45 degree end cut with slight radius, 45 degree trade corner solution for hob units, 100mm radius corner, 40mm radius corner, 35mm kitchen door hole & 3/4inch BSP hole for mixer taps. Fixed lengths for 400mm, 500mm, 550mm, 600mm, 616mm, 650mm, 700mm & 900mm wide worktops. Cuts up to 40mm thick worktops with or without anti-drip postformed edge. Three open-ended bolt recesses (dog bone style) for 150mm bolts. Engraved lines for short 65mm bolts & worktop cross-cut. 10mm diameter plastic pins with tapered shoulder for tight fit provides three point pin contact to ensure ease of setting up. Engraved markings for identification of pin holes. Pins made from ABS plastic for strength. Comes with: Carry Bag   Length: 1185 mm

Width: 390 mm Thickness: 15 mm Weight: 4.4kg End Cut; 45 degrees Corner Radius: 40 mm Corner Radius: 100 mm Corner Radius: 400 mm Corner Mitre Joint: 45 degrees Female cut material width loss: 35 mm



...

Trend PRESSURE/1 Finger Pressure 197x 82x 12.7mm

Features: Vertical or horizontal pressure guard Prevents the

...

Trend PRT Professional Router Table

Features: Professional portable router table with aluminium table surface

...

Trend PSNOW/SHOVEL Collapsible Snow Shovel in Bag The Trend Collapsible Snow Shovel is well designed, strong & lightweight. Suitable for light snow clearing applications. The shovel measures 33 x 23 x 8cm & when the 2 part handle is attached measures 94cm long. Handy for clearing paths at home, keep it on a hook in a cupboard. Ideal for storing in the boot of your car for cold weather emergencies, it wont take up much space even in the smallest of cars. It comes in a soft woven mesh bag with drawstring.

Features: 3 piece construction for minimum storage impact Spring loaded stud & eyelet mechanisms for secure fit on shaft Metal shaft for added strength & durability Shovel dimensions: 33x 23x 8cm Length: 94cm Weight: 0.3kg

...

Trend PT/160X48X20A Wave Form Saw Blade Panel / Trimming 160mm x 48 Teeth This sawblade is intended to be used in a Plunge Saw. With premium quality microgranular tungsten carbide tips for abrasive materials & a long lasting performance. Laser cut chrome alloy steel plate. Laser cut expansion slots & reamed bore to ensure precise fit to spindle. Hardened & tempered body. More teeth are preferred for a finer finish with a slower feed rate.

Features: These blades have a triple chip tooth design with a positive hook for super fine finish These blades are laser cut from hardened, chrome alloyed steel plate which is then tempered & roller tensioned The bore is accurately reamed to ensure precise balance Micro-granular carbide tips are used to give long lasting performance in a wide range of materials For plunge saws Will not distort the rubber splinter guard on guide rail D: 6 1/4 inches D: 160 mm Bore: 20 mm Kerf: 2.2 mm Plate thick: 1.6 mm No. of Teeth: 48 Tooth form: TCP Hook: 4 degrees Quick Selector: No. 7.1 Colour Code: violet Type: Panel Trimming Cut Finish: Super fine Weight: 0.5kg

...

Trend RB/B/10 Rota-tip Blade 49.5x 12x 1.5mm
- Pack of 10

Features: Replacement Solid Carbide blades Supplied


...

Trend RB/E/10 Rota-tip Blade 12x 12x 1.5m Ten Off

Features: Replacement Solid Carbide blades Supplied in a

...

Trend RB/F/10 Rota-tip Blade 30x 12x 1.5mm Ten Off

Features: Replacement Solid Carbide blades Supplied in a

...

Trend RB/H/10 Rota-tip Blade 49.5x 9.0x 1.5 Pack of 10

Features: Replacement Solid Carbide blades Supplied

...

Trend 24/12X1/4TC TCT Plug Maker No.12

Features: Plug cutter Designed to exactly fit the counterbored holes

...