Trend D/LIFT/C Door Lifter C The Trend D/LIFT/C is a heavy duty door lifter which allows up, down & side to side movement for easy positioning & fixing of doors, panels & plasterboard. If your work involves hanging doors or positioning heavy panels this tool is a must as it removes all the strain, up to a maximum of 200kg. For use by Carpenters, Plasterers, Dry Liners & Locksmiths.

Features: Foot operated lifter to support door while fitting into door frame Foot operated freeing up the users hands 360 degree rotation Lifts door 60mm (2-3/8 inch) high & maximum weight 200kg (440 Ibs) Made from metal with non marring foot pad Raises up parallel Extra care needed with veneered doors No need to use a chisel & bolster

...

Trend D/STAND/A Door Stand 32mm
- 55mm

Features: Holds door on its edge while routing hinge recess & mortise


...

Trend DAF/8 Digital Angle Finder 8 inch (200mm) with Level Vial

Features: Large clear LCD display with digital

...

Trend DAR/200 Digital Angle Rule 20cm Extendable to 400mm the Digital Angle Rule that calculates angles quickly & accurately & is ideal for woodworking, construction & machining. The Trend DAR/200 Digital Angle Rule is an indispensible tool for any tradesman who works with angles or straight edges because it doubles as an angle finder as well as a rule. It is perfect for finding both internal & external angles. Small enough to store in your rear pocket.

Features: 400 mm stainless steel rule with metric & imperial scale Calculates angles quickly & accurately Ideal for woodworking, construction & machining Digital angle display is clear & has 2 button operation & easy calibration Stainless steel rule with metric/imperial scale, scale length 200 mm & 7 inch Measuring range from 0° to 360° with an accuracy of 0.3° Accuracy of 0.3 deg Rule locking function is lockable in any position Auto-shut off in 6 minutes Changing the battery is simple Separate carry case is available Comes with: 1 x 3V CR2032 lithium battery

...

Trend DAR/500 Digital Angle Rule 50cm The Trend 50cm digital angle rule calculates internal & external angles swiftly & precisely & is perfect for woodworking, construction & machining. Marking & setting out has been made easy, the days of squinting at a rule or carefully setting a sliding bevel to a protractor are over.  

Features: Marking & setting out has been made easy, the days of squinting at a rule or carefully setting a sliding bevel to a protractor are over Digital calipers have taken care of linear measuring, & now the Trend DAR-500 is about to replace the sliding bevel with its two 200mm rules Stainless steel Has both metric/imperial scale Measuring range is from 000.0° to 360.0° An accuracy of 0.3° Rule locking function Easy operation with two press buttons Perfect for woodworking, construction & machining Calculates internal & external angles swiftly & precisely Shuts off automatically in 6 minutes   Comes with: CR2032 3v Lithium battery

...

Trend DC/RC/FC Diamond Cross Router Cutter Sharpener Fine / Coarse Diamond Cross Technology provides the perfect balance between diamond & recess, maximising abrasion rates & clearance of sharpening debris. Double-sided site & workshop router cutter sharpener with ergonomically designed handle for safety & ease of use.

Features: Ideal for fluted, shaped & small router cutters/bits For trade professionals 1.5mm Stainless Steel substrate Monycrystalline diamond with unique Diamond Cross relief pattern which gives optimal abrasion rates to maximise sharpening efficiency & reduces clogging Fine 600 grit (25 micron) & coarse 300 grit (50 micron) Easy read diamond grit indicator Guaranteed for three years Recommended use with Trend lapping fluid to prevent clogging or rusting & assist in keeping tools clean Use with no pressure

Size: 75 mm x 25 mm x 1.6 mm excl. handle Width including handle: 42 mm Grade: Fine & Coarse Grit: 600 & 300 (nom. 25 & 50 micron) Weight: 0.1kg



...

Trend DC/W8/FC Diamond Cross Stone Sharpener Fine/ Coarse 8 Inch / 203mm Diamond Cross Technology provides the perfect balance between diamond & recess, maximising abrasion rates & clearance of sharpening debris. Double-sided site & workshop 8 inch x 2-3/4 inch diamond bench stone sharpener. Ideal for up to 3 inch plane irons & chisels. For trade professionals.

Features: Laminated construction of diamond plated Stainless Steel & precision ground tool steel plate core Monycrystalline diamond with unique Diamond Cross relief pattern which gives optimal abrasion rates to maximise sharpening efficiency & reduces clogging Fine 1000 grit (15 micron) & coarse 300 grit (50 micron). Easy read diamond grit indicator Guaranteed for three years Recommended use with Trend lapping fluid to prevent clogging or rusting & assist in keeping tools clean Use with no pressure Ideal for flattening chisels & plane blades as well as achieving a shaving edge in seconds

Includes:: storage pouch, cleaning block & non-slip feet magnetic tool holder Comes With: 1 x Storage pouch 1 x Cleaning block 1 x Magnetic bench holder (pair)



...

Trend DE6278 Collet 1/2 Elu Mof 98-131-177 Dw 625ek

Features: Replacement collet Fits the following machines:-

...

Trend DG/JIG Draining Groove Jig The Trend DG/JIG is for routing draining grooves in solid timber for Belfast type sinks. This well made Jig is a solid, hard wearing piece of 12mm thick CNC machined phenolic measuring 59 x 63cm.

Features: Provides a 0.5 degree fall Grooves at 50mm pitch & 455mm long Sight marks for lining up Three removable sloping runners for support Cutter diameter check hole Fixing holes for user made stops for repetition work Warranty: 12 months Comes With: 1 x Cove cutter 1 x Guide bush (diameter 30mm)

...

Trend DG/PRO Drainer Groove Pro Jig Frame The Trend DG/PRO Frame is for routing drainer grooves in solid timber & solid surface worktops. Made from 12mm hardwearing CNC machined phenolic. X & Y-axis ski & carriage allows forward & back, & side to side movement.

Features: Provides a 0.5 degree fall Router carriage has hole to accept a 30mm guide bush Carriage can be locked to allow parallel groove routing for standard drainer grooves Router carriage can also be used for tapered surfacing applications with a 19mm diameter straight cutter Outer frame has index holes at 50mm centres to restrict length of slots &

Includes:: two index pins Five inner templates accessories available to give various groove affects such as straight slot, straight fan, curved fan, lightning fan & hot rod Router carriage is not used when inner templates are fitted Requires suitable plunge router with 30mm guide bush & cutters Patent App. No. GB1718517.4 A Unibase may be required for certain makes & models of router Comes With: 1 x Frame 1 x Router carriage ski assembly 2 x Index pins 1 x 4mm hex key 1 x 5mm hey key



...