More From Contributor

£104.00
Trend CDJ300 Craft Dovetail Jig 300mm

Features:
Trend CDJ300 Craft dovetail jig An accurate & easy-to-use Dovetail

...
Archived Product
£55.00
Trend CE/127127 Collet Extension 1/2" (Shank Diameter 1/2 Inch)

Features:
For use in router tables where

...
Archived Product
£42.00
Trend CE/88 Collet Extension 8mm Shank 8mm Collet (Shank Diameter 8 Mm")

Features:
The new size has an

...
Archived Product
£11.00
Trend CLT/SLV/8127 Collet Sleeve 8mm To 12.7mm

Features:
Reduction sleeve is used to reduce the collet size

...
Archived Product
£1.59
Trend COLL/12 Collar Pack

Features:
Collar Packs are used for cutters with shank mounted bearings Packs include

...
Archived Product
£62.00
Trend COMBI600 Bathroom & Kitchen Worktop Jig

Features:
Worktop jig Designed to enable all 1/2 inch shank plunge

...
Archived Product
£94.00
Trend COMBI66 Worktop Jig (500-650mm) Peninsular complete with location bushes & length stop. This Trend worktop jig is manufactured to enable all 1/2 inch shank plunge routers to cut accurate butt & scribe joints in postform workstops. Customers have found this product very easy to use & handle.

Features:
Machined from hardwearing solid laminate Will produce a joint in 15 minutes including setting-up time Out-of-square joints can be accommodated Facilities to cut various widths of board & thicknesses up to 42mm Integral panel bolt connector recessing template with easy spanner access Width setting stop for accurate positioning Supplied with clear & comprehensive instructions for use A single male & female template in 16mm solid laminate Facility to join boards from 500mm to 650mm wide Two bolt recess slot for connecting bolts Three alloy location bushes & width setting stop Cuts out of square joints (max. 3 degree) Jig requires: A portable plunge router with 12.7mm (1/2 inch) shank capacity & minimum 1300 watts A template guide bush with 30mm outside diameter A TCT router cutter with 12.7mm (1/2 inch) diameter & 50mm (2 inch) cut length Two 100mm (4 inch) throat clamps Comes with: 3 x Location Bushes 1 x Length Stop

...
Archived Product
£42.00
Trend Cordless Blade Triplepack Crosscut
- 24T
- 48T
- 60T This e Xclusive Toolstop Deal consists of 3 Trend Craft Pro Crosscut


...
Archived Product
£69.00
Trend CR/KFP/4 Kitchen Fitters Pack C153d X 5 Pieces (Shank Diameter 1/2")

Features:
Packs of cutters

...
Archived Product
£4.00
Trend CR/PB29 CRAFTPRO Carbide Planer Blades for Power Planers Professional Planer blade set. Trend solid carbide planer blades are manufactured from high grade carbide & are supplied in pairs. They are precision ground with two cutting edges & reversible for extended life. Never use dull blades. Unplug machine when fitting blades or undertaking any maintenance. Always refer to manufacturer's instruction when making adjustments. Planer blades must be securely clamped so that they cannot work loose in service. Suitable For: AEG (Atlas Copco) EH82, EH82.1, EH700. EH822 H750, H500, EH3-82, EH800, EH450 Black & Decker BD710, DN710, DN720, BD711, KW712, KW713, KW725, BD713, BD725 Bosch PH02-82, PH03-82/B, PH015-82, PH016-82, PH025-82, PH030-82, PH0100, PH0150, PH0200, PH300, 1592-9, GH0282, GH31-82, GH036-82C Casals CE82, CE98ACE Dewalt DW677, DW678K, DW678EK, DW680, D26500, D26501 Draper PT682, P882 Felisatti TP282 Ferm FP82 Freud FE82, FE82VCE Haffner FH224 Hitachi F20, FU20, P20V, P20SA Holz-Her 2321, 2321-S, 2322, 2223 (NEW) Mafell EHU82, MHU82, MHU82S, MHU82D Makita M102, 1900, 1900B, 1901, 1125, 1100, 1923, 1923BD, 1923H, 1902, FB0800 Metabo EXPERT, 4382, HO0882, HO8382 Nutool NPT82 Perles SK82A Peugeot RA82CS, RA400, RA3/82 Ryobi L282, L1323A, HL-82, L-1835, L180, GH014, EPN-7582 Skil 92H, 94H, 95H, 96H, 97H Wolf/ Kango 8614, 8057, 8108 Some Makita, Ryobi, Hitachi & Wolf/ Kango planers require conversion kit ref PB/CK/119 ...
Archived Product

Trend COMBI1002 Worktop Jig (1000mm)

Trend COMBI1002 Worktop Jig (1000mm) complete with length stop and location bushes. Features: For up to 1000mm wide worktop now with cable tidy insert & circular hinge cut apertures A single male and female template in 16mm solid laminate Facility to join boards from 450mm to 1000mm wide Facility to cut 22.5 degree mitre corners for hob units Intergral template slots for rounding and mitring of peninsular worktop corners for cable tidy inserts and a circular concealed hinge aperture and 3/4 inch BSP holes for mixer taps Three alloy location bushes and a width-setting stop Colour coded pin location for quick and easy use Three bolt recess slots for connection bolts Cuts out of square joints (max. 3 degrees) Jig requires: A portable plunge router with 12.7mm (1/2 inch) shank capacity and
minimum 1300 watts A template guide bush with 30mm outside diameter A TCT router cutter with 12.7mm (1/2 inch) diameter and 50mm (2 inch) cut length Two 100mm (4 inch) throat clamps Comes with: 1 x Length Stop 3 x Location Bushes
RIP - This product is no longer available on our network. It was last seen on 31.03.2015

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
  • Availability: Out Of Stock
  • Supplier: Toolstop
  • SKU: TRE-COMBI1002
Availability: In Stock
£239.00

Product Description

Trend COMBI1002 Worktop Jig (1000mm) complete with length stop & location bushes.

Features:
For up to 1000mm wide worktop now with cable tidy insert & circular hinge cut apertures A single male & female template in 16mm solid laminate Facility to join boards from 450mm to 1000mm wide Facility to cut 22.5 degree mitre corners for hob units Intergral template slots for rounding & mitring of peninsular worktop corners for cable tidy inserts & a circular concealed hinge aperture & 3/4 inch BSP holes for mixer taps Three alloy location bushes & a width-setting stop Colour coded pin location for quick & easy use Three bolt recess slots for connection bolts Cuts out of square joints (max. 3 degrees) Jig requires: A portable plunge router with 12.7mm (1/2 inch) shank capacity & minimum 1300 watts A template guide bush with 30mm outside diameter A TCT router cutter with 12.7mm (1/2 inch) diameter & 50mm (2 inch) cut length Two 100mm (4 inch) throat clamps Comes with: 1 x Length Stop 3 x Location Bushes

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Diameter - A measurement across a circle passing through the middle
Inch - Equivalent to approximately 2.5cm
Cable - A series of wires bonded to form a single thread
Colour - The categorised spectrum of light visable to humans
jig - A tool used to control the location, motiona and orientation of another tool to ensure accuracy
100mm - the equivilent of 10cm
Quick - Something that is fast
Width - The measurement of something from one side to the other.
Wide - Something with a large width.
Degree - An angle measurement, also can be the measurement of an extent that something happens, can also relate to an university academic measurement.
degree - The extremity of something or the angle. Can also relate to a university achievement.
Solid - Something that is firm and not liquid, a hard shape that cannot be changed easily.
Slots - A narrow opening which something can be inserted into, or a machine commonly found in casinos to win money and tokens.
Joints - The sections where one component is joined to another.

Supplier Information

Toolstop
Page Updated: 2020-07-29 10:35:21

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu