About Us
Contact Us
Privacy Policy
Cookie Usage
Add Your Store

More From Contributor

Trend C213X1/2TC Weatherseal Groover 3 X 7 X 36mm Diameter (Shank Diameter 1/2")
Trend C213X1/2TC
Weatherseal Groover 3
X 7 X 36mm
Diameter (Shank
Diameter 1/2")
£28.87
Trend C213X1/2TC Weatherseal Groover 3 X 7 X 36mm Diameter (Shank Diameter 1/2")

Features: Two fluted

...
Archived Product
Trend C220X1/4TC Intumescent Cutter 15mm x 24mm
Trend C220X1/4TC
Intumescent Cutter
15mm X 24mm
£25.00
Trend C220X1/4TC Intumescent Cutter 15mm x 24mm The Trend C220X1/4TC is a bearing guided intumescent strip cutter for routing the groove for intumescent strip in a frame or door. Fitted with a 1/4 Inch Shank

Features: To suit 4mm thick strip of 15mm width. Intumescent strip is used to create an effective barrier to both fire & smoke. Choose alternative bearings (not included) to suit other thicknesses of intumescent strip. Microgranular TC tips ensure perfect sharpness Highly groundtip face maintains its edge PTFE non-stick coated body Extra long shank Suitable for all makes of router

...
Archived Product
Trend CASE/DAR/200 Carry Case For DAR/200 Digital Angle Rule
Trend CASE/DAR/200
Carry Case For DAR/200
Digital Angle Rule
£6.00
Trend CASE/DAR/200 Carry Case For DAR/200 Digital Angle Rule

Features: Hard wearing carry case for the DAR/200

...
Archived Product
image missing
Trend CASE/DG Carry
Case For DG/ Jig
£20.00
Trend CASE/DG Carry Case for DG/ Jig The Trend CASE/DG is a Carry Case for the Drainer groove or Belfast Sink Jig. Both Jigs can be held in the bag at the same time.

Features: Will accept both jigs at the same time Adjustable shoulder strap & carry handle Flap with hook & loop closer Accessory pouch for sub-bases Can also be used for the STAIR/A & STAIR/B Stair Jigs

...
Archived Product
Trend CB/KIT Collet Brush Kit 4 Brush Sizes
Trend CB/KIT Collet
Brush Kit 4 Brush
Sizes
£5.30
Trend CB/KIT Collet Brush Kit 4 Brush Sizes

Features: Pack of four brushes, used to remove deposits of resin,

...
Archived Product
Trend CB38-532TC TCT Cb Counterbore
Trend CB38-532TC TCT
Cb Counterbore
£29.70
Trend CB38-532TC TCT Cb Counterbore

Features: These combination tools in TCT can be used in abrasive materials

...
Archived Product
Trend CCC/KIT Cutter & Collet Care Kit
Trend CCC/KIT Cutter &
Collet Care Kit
£22.27
Trend CCC/KIT Cutter & Collet Care Kit

Features: This kit contains the essential accessories to maximise the

...
Archived Product
Trend CDJ300 Craft Dovetail Jig 300mm
Trend CDJ300 Craft
Dovetail Jig 300mm
£104.00
Trend CDJ300 Craft Dovetail Jig 300mm

Features: Trend CDJ300 Craft dovetail jig An accurate & easy-to-use Dovetail

...
Archived Product
Trend CE/127127 Collet Extension 1/2" (Shank Diameter 1/2 Inch)
Trend CE/127127
Collet Extension
1/2"
(Shank Diameter 1/2
Inch)
£55.00
Trend CE/127127 Collet Extension 1/2" (Shank Diameter 1/2 Inch)

Features: For use in router tables where

...
Archived Product
Trend CE/88 Collet Extension 8mm Shank 8mm Collet (Shank Diameter 8 Mm")
Trend CE/88 Collet
Extension 8mm Shank
8mm Collet
(Shank Diameter 8
Mm")
£42.00
Trend CE/88 Collet Extension 8mm Shank 8mm Collet (Shank Diameter 8 Mm")

Features: The new size has an

...
Archived Product

Trend CB38-316TC 3/16 Drill Diameter X 3/8 Counterbore

Trend CB38-316TC 3/16 Drill Diameter X 3/8 Counterbore Features: The CB counterbores are extensively used for recessing bolt and screw heads. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. TCT version is used for plywood, particle boards and plastics (abrasive). Use a drilling speeds only. Not suitable for ferrous and non-ferrous metals. When setting-up, ensure flutes of drill are aligned with flute of counterbore. For replacement Twist Drills, use slow spiral type e.g 501/532 to 501/012 Warranty: 12 months D:3/8 inch D:9.5 mm D2:3/16 inch D2:4.76 mm Nett Weight: 0.036kg Packaged Size: 144x57x10mm
RIP - This product is no longer available on our network. It was last seen on 21.11.2018

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
  • Availability: Out Of Stock
  • Supplier: Toolstop
  • SKU: TRE-CB38-316TC
Availability: In Stock
£30.00
drilling & screwing | sawblades DIY > Tools & Electrical Tools > Sawing > Saw Accessories > Sawblades
Description Reviews / Comments Add New

Product Description

Trend CB38-316TC 3/16 Drill Diameter X 3/8 Counterbore

Features: The CB counterbores are extensively used for recessing bolt & screw heads. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. TCT version is used for plywood, particle boards & plastics (abrasive). Use a drilling speeds only. Not suitable for ferrous & non-ferrous metals. When setting-up, ensure flutes of drill are aligned with flute of counterbore. For replacement Twist Drills, use slow spiral type e.g 501/532 to 501/012 Warranty: 12 months D:3/8 inch D:9.5 mm D2:3/16 inch D2:4.76 mm Nett Weight: 0.036kg Packaged

Size: 144x 57x 10mm

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Diameter - A measurement across a circle passing through the middle
Inch - Equivalent to approximately 2.5cm
Warranty - A service provided by the retailer or manufacturer to ensure a device works for a period from new
Key - A physical or virtual device or code used for opening something
weight - A measure of the force applied on an object by gravity. Measured metric in grams and kilos or imperial in lbs and oz
Size - is the measurement of how big an object is in space.
Warranty - A purchasers guarantee from the manufacturer for replacement/fix of goods when faulty.
Adjustable - Something that can be changed or slightly modified to fit.
Flute - A long silver instrument with buttons to press to make different notes.
Adjustable - Something that can be changed in order to fit better.

Supplier Information

Toolstop
Page Updated: 2020-07-29 10:35:21

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu