About Us
Contact Us
Privacy Policy
Cookie Usage
Add Your Store

More From Contributor

Trend 12/3X1/4TC TCT Radius Cutter 3.0mm Radius
Trend 12/3X1/4TC TCT
Radius Cutter 3.0mm
Radius
£24.43
Trend 12/3X1/4TC TCT Radius Cutter 3.0mm Radius

Features: Used extensively for routing edge moulds, face grooves,

...
Archived Product
Trend 12/5X1/4TC TCT Radius Cutter 5.0mm Radius
Trend 12/5X1/4TC TCT
Radius Cutter 5.0mm
Radius
£26.89
Trend 12/5X1/4TC TCT Radius Cutter 5.0mm Radius

Features: Used extensively for routing edge moulds, face grooves,

...
Archived Product
Trend 12/6X1/4TC TCT Radius Cutter 6.3mm Radius
Trend 12/6X1/4TC TCT
Radius Cutter 6.3mm
Radius
£36.37
Trend 12/6X1/4TC TCT Radius Cutter 6.3mm Radius

Features: Used extensively for routing edge moulds, face grooves,

...
Archived Product
image missing
Trend 165mm Sawblade
Twin Pack 24T And 40T
£24.00
Trend 165mm Sawblade Twin Pack 24T & 40T This e Xclusive Toolstop Deal consists of the Trend CSB/16524T Craft Pro Saw Blade 165mm x 24 Teeth x 20 Thin & Trend CSB/16540T Craft Pro Saw Blade 165mm x 40 Teeth x 20 Thin. Both sawblades are intended to be used in portable or stationary sawing machines. Featuring quality carbide tips for high wear resistance. Compatible with all sawing machines though bushing washers may be required for some models. With a reamed bore to ensure precise fit to spindle. CSB/16524T Craft Pro Tungsten Carbide Tipped Combination Sawblades are designed for a medium finish in soft wood, hard wood, plasterboard, soft fibre board, particle board, cement bonded board, plywood, MDF & hardboard. With less teeth which is preferred for ripping along the grain of hard & soft wood & other wood based material. For a coarser finish & faster feed rate. CSB/16540T Craft Pro Tungsten Carbide Tipped Trimming / Crosscut Sawblades are designed for a medium to fine finish in particle board, boards veneered both sides, plywood MDF, chipboard laminated one-sided, veneer & hardboard. With more teeth which is preferred for cutting across the grain of hard & soft wood. Finer finish & a slower feed rate.

Features: Silverbraze to ensure tip is bonded securely to body Body hardened & tempered to maintain trueness Laser etched on reverse to European standard EN847-1/2 The Trend name for traceability & a guarantee of quality High grade alloy steel plate body precision ground to maintain flatness Not for use with Bosch GSK 24 Warranty: 12 months

...
Archived Product
image missing
Trend 190mm Sawblade
Triple Pack - 24T And
24T And 40T
£36.00
Trend 190mm Sawblade Triple Pack
- 24T, 24T & 40T This e Xclusive Toolstop Deal consists of 2 x Trend CSB/19024 Craft Saw Blade
...
Archived Product
image missing
Trend 2/10X1/4TC
Single Flute Cutter 2
Mm Diameter
(Shank Diameter
1/4")
£17.49
Trend 2/10X1/4TC Single Flute Cutter 2 Mm Diameter (Shank Diameter 1/4")

Features: Eccentric single flute

...
Archived Product
Trend 2/15X1/4TC Single Flute Cutter 3 Mm Diameter (Shank Diameter 1/4")
Trend 2/15X1/4TC
Single Flute Cutter 3
Mm Diameter
(Shank Diameter
1/4")
£19.56
Trend 2/15X1/4TC Single Flute Cutter 3 Mm Diameter (Shank Diameter 1/4")

Features: Eccentric single flute

...
Archived Product
Trend 24/10X1/4TC TCT Plug Maker No.10
Trend 24/10X1/4TC TCT
Plug Maker No.10
£37.31
Trend 24/10X1/4TC TCT Plug Maker No.10

Features: Plug cutter Designed to exactly fit the counterbored holes

...
Archived Product
Trend 24/1X1/2TC Tapered Plug 1/2 Inch Diameter (Shank Diameter 1/2")
Trend 24/1X1/2TC
Tapered Plug 1/2 Inch
Diameter
(Shank Diameter
1/2")
£69.00
Trend 24/1X1/2TC Tapered Plug 1/2 Inch Diameter (Shank Diameter 1/2")

Features: A Tapered plug ensures

...
Archived Product
Trend 24/80X1/4TC TCT Plug Maker No.8
Trend 24/80X1/4TC TCT
Plug Maker No.8
£37.31
Trend 24/80X1/4TC TCT Plug Maker No.8

Features: Plug cutter Designed to exactly fit the counterbored holes

...
Archived Product

Trend 2/01X1/4TC TCT Single Flute Cutter 1.5 X 6.0mm

Trend 2/01X1/4TC TCT Single Flute Cutter 1.5 x 6.0mm Features: Suitable for grooving, rebating, mortising and drilling The single flute cutters offer fast free cutting If you require a cleaner cut please use two flute cutters The depth of cut on cutters of 2.0 mm diameter and below should be a maximum of 1.0 mm per pass Small diameters in Tungsten Carbide must be handled with care to avoid breakage and very shallow passes must be made Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods Single flute cutters must not be used in eccentric chucks   Shank: 1/4in Cutting Diameter (D): 1.5mm Cutting Length (C): 6.0mm Net Weight: 0.014kg
RIP - This product is no longer available on our network. It was last seen on 21.11.2018

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
  • Availability: Out Of Stock
  • Supplier: Toolstop
  • SKU: TRE-2-slash-01X1-slash-4TC
Availability: In Stock
£17.42
electrical equipment | sawblades DIY > Tools & Electrical Tools > Sawing > Saw Accessories > Sawblades
Description Reviews / Comments Add New

Product Description

Trend 2/01X1/4TC TCT Single Flute Cutter 1.5 x 6.0mm

Features: Suitable for grooving, rebating, mortising & drilling The single flute cutters offer fast free cutting If you require a cleaner cut please use two flute cutters The depth of cut on cutters of 2.0 mm diameter & below should be a maximum of 1.0 mm per pass Small diameters in Tungsten Carbide must be handled with care to avoid breakage & very shallow passes must be made Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood & certain hardwoods Single flute cutters must not be used in eccentric chucks   Shank: 1/4in Cutting Diameter (D): 1.5mm Cutting Length (C): 6.0mm Net Weight: 0.014kg

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Diameter - A measurement across a circle passing through the middle
weight - A measure of the force applied on an object by gravity. Measured metric in grams and kilos or imperial in lbs and oz
cutting - The seperation of an object usually using a cutting tool such as a knife
Small - something that takes up less space than normal.
Flute - A long silver instrument with buttons to press to make different notes.
Chipboard - A piece of wood like material that us used to pin paper and notes too.
MDF - A shortened term for Medium Density Fibreboard

Supplier Information

Toolstop
Page Updated: 2020-07-29 10:35:21

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu