Zircon Z65413 Studsensor E50 Electronic Stud Finder The Stud Sensor E50 quickly & easily locates the edges of wood & metal studs & joists behind walls floors & ceilings. Its easy-to-read display screen indicates stud edges the patented Spot Lite Pointer shines a beam of light on the wall to identify the target & Wire Warning detection indicates the presence of live AC voltage. Its new patent-pending pinch grip & contoured shape provide an easy secure hold in either hand at any angle

Features: Locates the edges of wood or metal studs up to 3/4 inch (19 mm) deep Deep Scan mode doubles the scanning depth to 1 1/2 inches (38 mm) Easy-to-read LCD display indicates when a stud edge is approached Updated Spot Lite Pointer shines an arrow-shaped light on the wall to mark the target Wire Warning detection indicates the presence of live unshielded electrical wiring up to 2 inches (51 mm) deep Should scanning begin over a stud Zircon's patented 'over-the-stud' indication alerts the user to start the scan in a new location Patented Tru Cal technology indicates when the tool is calibrated & ready

...

Zircon Exitpoint XL300 Through Hole Drill Guide The XL300 is the easiest & fastest way to locate a precise spot, without measuring, before you start your project. Scans through most types of non-magnetic building materials, such as wood, drywall, gypsum panels, bricks, & poured concrete up, to 11.81 in. (30 cm) thick. This simple, yet effective, tool saves your valuable time & money by reducing guesswork, rework, & unnecessary holes. Ideal for cable & wire installations, concrete scanning, & anytime through-hole drilling is required. Affix the transmitter magnet on the spot to be drilled, then scan the vicinity of the other side of the wall with the receiver. When the receiver is near the center of the transmitter, & the field strength is strong, the receiver will light red. 3 x AAA Batteries are required but not included.

Features: Features two scan modes Scan mode 1: Normal mode scans through conventional interior walls up to 4.53 in. (11 cm) thick Scan mode 2: Deep Scan mode scans through materials up to 11.81 in. (30 cm) thick Note: Tool does not detect hidden objects behind the wall. Must use other information sources to locate, & avoid, objects behind surface before drilling Comes With: Small & large transmitter magnets Reusable adhesive discs Quick Reference Guide Carrying case

...

Zircon Z67871 Leak Alert & Electronic Water Detector The Zircon Z67871 Leak Alert & Electronic Water Detector can help to prevent serious water damage in your home. This self-contained, battery-powered unit will sound a loud alarm the second it gets wet, alerting you to a potential water leak. Place it anywhere potential flooding or leaking exists such as under sinks, near dishwashers & refrigerators, near water heaters, under fish tanks, in basements, near plumbing & toilets.

Features: Loud alarm (85 d B) sounds for up to 72 hours In the event of a flood, unit will float & continue to sound alarm until battery is depleted Fully automatic operation
- no wiring required Low battery indicator for optimum safety & performance NB Battery Not Included


...

Zircon Z69206 e 60c Electri Scanner Zircon Electri Scanner e 60c quickly & easily locates hot electrical wiring & metal behind walls, floors, & ceilings. The backlit display screen flashes, or lights red, to alert the presence of live AC in both modes. The Mode Selector Switch makes it easy to change functions, while the easy-to-read display screen, Target Indication Bars, Spot Lite Pointer, & audio tone all indicate the location of the target.

Features: AC Scan mode locates live, unshielded AC electrical wiring up to 2 in. (51 mm) deep Wire Warning Detection indicates the presence of live, unshielded AC electrical wiring up to 2 in. (51 mm) deep in Metal Scan mode Metal Scan mode locates non-ferrous metal, such as copper pipe, up to 1 1/2 in. (38 mm) deep, & ferrous metal, such as steel pipe, up to 3 in. (76 mm) deep Target Indication Bars will begin to turn on as live AC electricity or metal is approached Color Trip Display lights red in AC Scan mode & blue in Metal Scan mode Low Battery Indicator for optimum performance Spot Lite Pointer shines an arrow-shaped light on the wall when the maximum live AC or metal is detected NB Battery Not Included

...

Zanussi ZAN2100A Upright vacuum The Zanussi ZAN2100A Upright vacuum come with suction seal technology. The suction seal technology with All-Surface Suction Plates concentrates airflow for deep cleaning suction power. As you move across carpet, hardwood or tile floors the plates raise & lower, creating a seal to maximise airflow for powerful cleaning performance. Whether it's surface dirt or debris hiding in crevices, it's sucked up & away without any scattering. The large 2 L dust bin is quick to access, empty & clean & due to its size you won't need to empty it as often. In addition the filters are easy to remove, clean & put back in place. Hard to reach areas are a breeze thanks to the on board extension tubes
- especially when combined with the crevice tool attachment or dusting brush for those tricky cleaning areas in your home.

Features: Suction Seal technology Lightweight-easy to manoeuvre around your home Powerful- with 180 w the suction is strong Multi Cyclonic action efficiently separates dust & dirt particles from the air path, helping to ensure the filter doesn't get clogged Comes With: Dusting brush Suction hose Crevice nozzle

Colour: White / Yellow Capacity: 1.4 litres Volume Capacity: 1.5 litres Power / Wattage: 1000 watts Operating Radius: 7 metres Energy Efficiency Class: A to G Annual Energy Consumption: 29.8 Kilowatt Hours Per Year Carpet Cleaning Performance Class: B Hard Floor Cleaning Performance Class: E Dust Re-emission Class: G Noise Level: 89 d B




...

Zircon Z62134 Multi Scanner i 700 One Step Centre Finder The Zircon Multi Scanner i 700 One Step quickly & easily locates the edges & center of wood & metal studs & joists behind walls, floors, & ceilings. It also locates metal as well as live AC electrical wiring. The ultra-bright display screen, Spot Lite Pointing System, & audio tone all indicate the location of the target. The signal strength indicator helps to distinguish between shallow & deep targets.

Features: Stud Scan mode locates the edges & center of wood or metal studs up to 3/4 inch (19 mm) deep Deep Scan mode doubles the scanning depth to 1 1/2 inches (38 mm) An ultra-bright LCD screen indicates direction, edges & center of studs AC Scan finds & traces live, unshielded electrical wiring up to 2 inches deep Metal Scan mode detects ferrous metal, such as steel pipe, up to 3 inches (76 mm) deep Wire Warning detection indicates the presence of live, unshielded electrical wire up to 2 inches (51 mm) deep in stud & metal scanning modes ACT (Auto Correcting Technology) automatically corrects common user errors, such as when scanning begins over a stud Unique floating-head design keeps the scanning head flat on rough surfaces Integrated, erasable marker allows for one-handed operation.

...

Zircon Z62151 Metalli Scanner MT6 The Zircon Metalli Scanner MT6 metal locator detects embedded Rebar, Pipes, Conduit, Junction Boxes, Metal Framing & Studs before your drill bit or saw blade does. Takes the guesswork out of drilling keeping the operator safe & the job on course. This powerful dedicated metal scanner is the tool you need if you are sawing concrete slabs or walls that contain rebar, conduit, or plumbing. It can locate metal up to 6 inches (152 mm) deep in solid concrete & other non-metallic surfaces. The MT6 locates, & differentiates between, ferrous & non-ferrous metal & indicates the target depth in inches & centimeters. When approaching a metal object, a large plus (+) sign appears on the display. When the plus becomes a minus (-), the tool has crossed over the target & is now moving away. Use the Metalli Scanner MT6 to find or avoid rebar, cables, pipe, nails in reclaimed wood, nails / tacks in studs behind lath & plaster walls, electrical boxes & conduit, & more. A 9 Volt battery is required for operation but is not included.

Features: Find ferrous & non-ferrous metal up to 6 in. (152 mm) deep in concrete & other non-metallic surfaces Automatically differentiates between magnetic metal (such as rebar) & non-magnetic metal (such as copper pipe) Shows the depth of metal from the surface in both inches & centimeters Easy-to-read LCD screen identifies the location of metal objects to the nearest inch & depth to the nearest 1/2 in. (13 mm) Helps map out the grid of metal through any nonmetallic construction material, including concrete, tile, & marble Ideal for finding and/or avoiding rebar, cables, pipe, nails in reclaimed wood, nails/tacks in studs behind lath & plaster walls, electrical boxes & conduit, & more Low battery indicator for optimum performance

...

Zircon Z62291 Multi Scanner i 520 One Step Centre Finder Zircon has wrapped all the features from the i 500 into a new sleek form & added their exclusive Auto Correcting Technology (ACT) to it.

Features: The Multi Scanner i 520 One Step wall scanner easily & accurately locates studs, joists, metal & hot electrical wire A 4-mode switch provides instant access to all functions. A ultra-bright LCD screen indicates direction, edge, & centre of studs Stud Scan finds metal or wood studs & joists up to 19 mm deep Deep Scan mode probes further, locating studs & joists up to 38 mm deep behind drywall, panelling, or plywood Metal mode detects ferrous metal, such as rebar or steel pipe up to 76 mm deep & non-ferrous metal, such as copper pipe up to 38 mm deep AC Scan finds & traces live electrical wire Spot Lite Pointing System & audio alert automatically identify the target In stud or metal modes, Wire Warning Alert detects the presence of unshielded hot electrical wiring ACT Auto Correcting Technology checks calibration 10 times per second & recalibrates automatically to ensure accuracy

...

Zircon Z63739 Studsensor Edge

Features: The maker of the original Stud Sensor is now taking stud finding to

...

Zircon Z63969 Studsensor E50 Electronic Stud Finder The Stud Sensor E50 quickly & easily locates the edges of wood & metal studs & joists behind walls floors & ceilings. Its easy-to-read display screen indicates stud edges the patented Spot Lite ...