Stanley 2-20-556 Fat Max Jab Saw & Scabbard The Stanley Fat Max jab saw has a hardened & tempered blade for durability & long life. The moulded handle combines a high impact plastic & soft touch inserts for enhanced comfort & control, & the large smooth end pad facilitates pushing & twisting the blade through plasterboard. The saw has a sharp point for piercing board & aggressive, triple bevel teeth for a faster cleaner cut. Features: Hardened & tempered blade for durability & long life Moulded handle combining high impact plastic & soft touch inserts for enhanced comfort & control Large smooth end pad to facilitate pushing & twisting blade through plasterboard. Sharp point for piercing board Aggressive triple bevel teeth for a faster cleaner cut ...
Stanley 2-34-791 Tape Open Reel Power Winding Fibreglass 30 Metres / 100 Feet This open reel fibreglass long tape has 26 fibreglass strands which ensure less stretch for a better accuracy & a washable blade which is non-corrosive & resists fading. The blade is printed on both sides for easier reading. A bi-material grip for comfort & folding rewind crank with rotating fingertip knob makes blade rewind smoother & easier. High impact ABS case for a longer life with Class III accuracy. Features: 26 Fibreglass strands ensure less stretch for a better accuracy Washable blade - non corrosive & fade resistant Blade printed on both sides for easier reading 12mm - ...
Stanley 2-34-794 Open Reel Fibreglass Tape 60m / 200ft The Stanley 2-34-794 Open Reel Tape is made from 40 fibreglass strands to ensure less stretch for a better accuracy. It has a washable blade which is non corrosive & resists fading which is printed on both sides for easier reading. Bi-material grip for comfort. Folding rewind crank with rotating fingertip knob to make blade rewind smoother & easier. High impact ABS case for a longer life. Features: Class III Corrosion-resistant, UV protected, non-conductive tape highly resistant to site drainage Ground Spike for accurate measurement High impact ABS open reel to withstand severe work conditions Large grip handle to fit better in hand Reinforced fibreglass tape (40 strand vs 24) reduces elasticity & improves measuring accuracy Tape blade has washable pvc coating to increase life Yellow blade print for precise measuring ...
Stanley 2-46-028 Die Cast Combination Square 30cm / 12 Inch This die cast combination square from Stanley can be used as a try & mitre square, depth or height gauge & spirit level. The precision body has 3 machined faces for accuracy. Features: Class 2 accuracy Coated to provide resistance to rust It has a diecast metal body, heavy-duty screw & regulated vial to ensure accuracy 360° all round visibility vial With high quality brass nut & scriber fittings for long life Metric & imperial clear graduations High Visibility yellow finish ...
Stanley 2-65-014 Cushion Grip Flared & Pozi Screwdriver Set 10 Piece The Stanley 2-65-014 Cushion Grip Screwdriver Set offers 5 Slotted & 5 Pozi of varying sizes in a hard plastic Carry Case for storage. All Screwdrivers have bi-material soft grip handles & 4 different blade lengths for versatility. Features: Chrome plated bar ensuring resistance to corrosion Soft grip handle for excellent comfort & control Smooth domed end ensures fast spinning action with speed & comfort Large diameter handle which offers great torque needed for driving wood screws Tip identification for easy choice of the correct screwdriver for each screw type High grade steel bar reducing the risk of tip breakage Magnetic tips - easy pick up & screw locator Contents: Flared tip width 6.5, blade length 150mm Flared tip width 5, blade length 100mm Flared tip width 3, blade length 75mm Flared tip width 6.5, blade length 45mm Flared tip width 8, blade length 150mm Pozidriv tip number 0, blade length 60mm Pozidriv tip number 1, blade length 75mm Pozidriv tip number 2, blade length 45mm Pozidriv tip number 2, blade length 100mm Pozidriv tip number 3, blade length 150mm ...
Stanley 2-69-268 25 Piece Folding Hex Key Set The Stanley 2-69-268 is a folding hexagon, metric, imperial & torx key set with bi-material grips for increased comfort. The keys have chamfered tips to aid location & a phosphate finish for corrosion protection. Features: Bi-material grip for increased comfort Chamfered tip to aid location Phosphate finish for corrosion protection Supplied in card Comes with: Hex key sizes (Metric): 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm & 8mm Hex key sizes (Imperial): 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32" & 1/4" Hex key sizes (Torx): T9, 10, 15, 20, 25, 27, 30 & 40 ...
Stanley 2-98-540 Fat Max Knife+10 Blade Pack The Stanley 2-98-540 Fat Max Knife + 10 Blade Pack is the ideal contractors tool to have for functionality. Its lightweight aluminium body means it is extremely strong & durable for the jobsite. Its rubberised ergonomic handle adds to the comfort & grip of the knife also reducing the chance of injury. The body of the knife swivels open for an easy & tool free blade change. Spare blades can also be stored inside the body in the handle area at up to seven at a time. Features: Lightweight aluminium body Body swivels open for easy blade change Integral blade storage No tools required for blade change Body accepts all standard Stanley utility knife blades ...
Stanley 3-11-921 1992B Knife Blades Heavy-Duty Pack 10 Dispenser 10 sharp Stanley knife blades in a well designed depenser. Slide the tab to the right & 1 blade slides out. Keeps all the blades safely in one place. Genuine Stanley No.1992 blades at a great price. Features: Heavy-duty, general purpose blade Ideal for carpet, vinyl & any other material requiring a stiffer & stronger blade 10 blades supplied in a dispenser ...
Archived Product
Stanley 2-46-500 Try & Mitre Square 200mm
Stanley 2-46-500 Try & Mitre Square 200mm Features: Try & Mitre Square with a plastic (ABS) stock, marked in metric only on both sides of steel blade Hole in stock for storage
RIP - This product is no longer available on our network. It was last seen on 31.03.2015
This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.
Use our search facility to see if it is available from an alternative contributor.
Stanley 2-46-500 Try & Mitre Square 200mm Features: Try & Mitre Square with a plastic (ABS) stock, marked in metric only on both sides of steel blade Hole in stock for storage
Reviews/Comments
Add New
Intelligent Comparison
Oooops! We couldn't find anything! Perhaps this product's unique.... Or perhaps we are still looking for comparisons! Click to bump this page and we'll hurry up.
Price History
Vouchers
No voucher codes found. Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Facebook
Jargon Buster
Steel - An alloy made predominately of Iron combined with <2% carbon
Plastic - A generic term for a synthetic product used in the manufacture of products
blade - A flat part of a device which usually has a cutting edge
200mm - The equivilent of 20cm
Supplier Information
Toolstop
Page Updated: 2020-07-29 10:35:21
Community Generated Product Tags
Oh No! The productWIKI community hasn't generated any tags for this product yet!