Numatic NRV200 9 Litre Dry Commercial Vacuum Pro-Flo 620W The 200 series has all the many features of the popular Henry design with full professional Pro-Flo power & performance; Tritex filtration but with the addition of an extended commercial 12.5 metre cable rewind & storage system. Available in both 110 & 240 volt models for selection.

Features: Rewind commercial tub vac 9 ltr dry capacity vacuum Comes with: 300mm Combination Floor Nozzle 2 x Aluminium Extension Tubes 240mm Crevice Tool 60mm Multi Angle Brush Aluminium Tube Bend with Volume Control 1.9m Nuflex Threaded Hose Uses: general office cleaning, & regular contracts PLEASE NOTE
- photo shows a 2-speed model, this model is limited to 1-speed


...

Numatic NRV200 9 Litre Dry Commercial Vacuum Pro-Flo 620W The 200 series has all the many features of the popular Henry design with full professional Pro-Flo power & performance; Tritex filtration but with the addition of an extended commercial 12.5 metre cable rewind & storage system. Available in both 110 & 240 volt models for selection.

Features: Rewind commercial tub vac 9 ltr dry capacity vacuum Comes with: 300mm Combination Floor Nozzle 2 x Aluminium Extension Tubes 240mm Crevice Tool 60mm Multi Angle Brush Aluminium Tube Bend with Volume Control 1.9m Nuflex Threaded Hose Uses: general office cleaning, & regular contracts PLEASE NOTE
- photo shows a 2-speed model, this model is limited to 1-speed


...

Numatic NRV200 9 Litre Dry Commercial Vacuum Pro-Flo 620W The 200 series has all the many features of the popular Henry design with full professional Pro-Flo power & performance; Tritex filtration but with the addition of an extended commercial 12.5 metre cable rewind & storage system.

Features: Rewind commercial tub vac 9 ltr dry capacity vacuum Comes with: 300mm Combination Floor Nozzle 2 x Aluminium Extension Tubes 240mm Crevice Tool 60mm Multi Angle Brush Aluminium Tube Bend with Volume Control 1.9m Nuflex Threaded Hose Uses: general office cleaning, & regular contracts PLEASE NOTE
- photo shows a 2-speed model, this model is limited to 1-speed Motor: Pro-Flo Motor Power: 620 W Carpet/ Hard Floor Pickup: C / CDust Re-Emission Class: CEnergy Efficiency Class: A Airflow: 45 L/sec Suction: 2600 mm Capacity: 9 L Mains lead length: 12.5m Cleaning Range: 31.8 m Weight: 6.9kg

Size: 355x 355x 415mm




...

Numatic NVA601101 Nuflex Hose 2.4 Metres This flexible hose is suitable for: Charles CVC370-2 CRQ370-2 Harry HHR200A Henry HVR200A Henry Micro HVR200M-22 Henry Xtra HVX200A Hetty HET200A MFQ370-22 NQS250B-22 NQS250 NSP 180A NSP 200A NSR 200A NST 220A NVP180-2 PSP 200A PSP 370A PSP180A PVR 200A PVR 370A PVT 220A PVT 390A WV370-2 WV380-2 NVQ380 WV470 NVQ200 NVQ370 AVQ250

Features: 2.4 Metres long Hard wearing flexible black plastic construction   Weight: 0.5kg

...

Numatic NVA601529 Wand Dock Combination Floor Nozzle 300mm The 300mm Combination Floor Nozzle fits: Henry Micro HVR200M-22, Charles CVC370, George GVE370, NQS250B, NQS250, NVQ200, NVQ370, NVQ380, Hetty HET200A, CRQ370, Harry HHR200A, PSP180A, PSP 200A, PSP 370A, PPR 370A, PPR 200A, PPT 390A, PPT 220A, Henry Xtra HVX200A, Henry HVR200A, MFQ370, PPH320A & RSV130.

Features: Switch to change brushes in or out   Dimensions: 77

...

NWS 043-49-VDE-160-SB VDE Cable Cutters 160mm (N643501-3K) The NWS 043-49-VDE-160-SB are for stripping & cutting copper & aluminium cable. With enhanced cutting geometry for simple cutting & higher operating times.

Features: Ratchet-shaped clamping of the cable ensures crimp-free cutting Precision cutting edge for a smooth & clean cut without any burrs Not suitable for steel wire, aluminium alloys & hard-drawn copper conductors Re-adjustable screw-joint Handles with ergonomically shaped Soft Gripp multi-component safety sleeves according to DIN EN/IEC 60900 Professional design for easy handling under permanent load made from special tool steel, forged, oil-hardened Length: 160mm Length: 6 1/4 inches Cable
- Al + Cu multi-wired conductor single & stranded conductor: 16mm Cable
- Al + Cu multi-wired conductor single & stranded conductor: 50mm Weight: 0.2kg



...

NWS 043-49-VDE-210-SB VDE Cable Cutters 210mm (N643518-3K) The NWS 043-49-VDE-210-SB cable cutters are for stripping & cutting copper & aluminium cable. With enhanced cutting geometry for simple cutting & higher operating times.

Features: Ratchet-shaped clamping of the cable ensures crimp-free cutting Precision cutting edge for a smooth & clean cut without any burrs Not suitable for steel wire, aluminium alloys & hard-drawn copper conductors Re-adjustable screw-joint Handles with ergonomically shaped Soft Gripp multi-component safety sleeves according to DIN EN/IEC 60900 Professional design for easy handling under permanent load made from special tool steel, forged, oil-hardened Length: 210mm Length: 8 1/4 inches Cable
- Al + Cu multi-wired conductor single & stranded conductor: 25mm Cable
- Al + Cu multi-wired conductor single & stranded conductor: 70mm Weight: 0.325kg



...

NWS N609538 Electricians VDE 5-In-1 Combi Max Pliers 180mm (N1093-49-VDE-180C) High Leverage Combination Pliers Combi Max+ VDE. American pattern. For holding, gripping, bending & cutting work. Suited to cutting hard & soft wires. Asymmetric inside jaws for better grip on the workpiece.

Features: For shortening screws M 3.5 Cutting edges inductively hardened Gripping zones for flat & round materials With Nail- & wire holder Integrated ring spanner Power transmission with optimum leverage for easy & effortless work Handles with ergonomically shaped Soft Gripp multi-component safety sleeves according to DIN EN/IEC 60900 made from tool steel, forged, oil-hardened Length: 180mm

Width: 65mm

Height: 20mm Soft wire
- 220 N/mm






...

NWS 1343-49-VDE-160-SB VDE 2-in-1 Side Cutters 160mm (N634547) To enable strain-free, concentrated working over longer periods of time, the handles of these side Cutters are non-slip & safe thanks to the Soft Gripp sleeves, on the one h&, & fit snugly in the hand due to the ergonomically designed soft zones, on the other. The pliers are drop-forged tool steel & are oil hardened. The cutting edges of this cutting tool is induction-hardened to ensure it is able to cope with the needs of professionals in industry & the trades.

Features: For cutting hard & soft wires For shortening screws M 3.5 Precision cutting edge for the finest wires Cutting edges inductively hardened Cutting edge hardness approx 62 HRC Power transmission with optimum leverage for easy & effortless work Handles with ergonomically shaped Soft Gripp multi-component safety sleeves according to DIN EN/IEC 60900 made from special tool steel, forged, oil-hardened   Length: 160mm Soft wire
- 220 N/mm


...

NWS 1651-12-240 Waterpump Pliers Classic Plus 240mm The 1651-12-240 water pump pliers are indestructible with safety box joint for highest stress & double-toothed jaws. Cogs in addition induction hardened. Optimum jaw geometry with self-locking serration.

Features: Gripping capacity 40% above ISO by means of arch-shaped pitch adjustment Ideal fulcrum, minimum effort Finger trap protection for safe work, prevents injuries caused by squeezing Box joint with wide guide surfaces Handles coated with plastic made from chrome vanadium steel, forged, oil-hardened   Length: 240mm Length: 9 1/2 unches Maximum span: 50mm DIN standards
- National, European & worldwide: DIN ISO 8976 Weight: 0.34kg


...