Channellock GS4, 337, 3017 & 430 Plier Set 3 Pieces This 3 piece plier set from Channellock comprises of the 7 Inch 337 Wire Cutters, the 8 Inch 3017 Long Nose Pliers & the 10 Inch 430 Water Pump Pliers. This plier set is a handy addition to your tool kit. 337 Cutting Pliers Laser heat treated for longer life Precision machined knife & anvil style cutting edges to ensure perfect mating & superior cutting edge life Channellock blue comfort grips 3017 Long Nose Plier Crosshatch pattern on jaws Without side cutter High Carbon C1080 steel for superior performance & an electronic coating for ultimate rust prevention Channellock blue comfort grips 430 Tongue & Groove Plier Right angle laser heat treted teeth grip better & last longer Patented reinforced edge Undercut tongue & groove wont slip Permalock fastener eliminates nut & bolt failure High Carbon C1080 steel for superior performance & an electronic coating for ultimate rust prevention Channellock blue comfort grips   Weight: 1.5kg ...

Channellock TH-4 Pliers & Screwdriver Set with Holster This Pliers & Screwdriver Set from Channellock consists of the 420 Original Tongue & Groove Plier, the 337 7 Inch High Leverage Diagonal Lap Joint Cutting Plier, 54C Slotted & P14C Phillips Screwdrivers with a Nylon Woven Holster. 420 Plier

Features: Highest carbon C1080 drop forged steel for superior strength & an electronic coating for ultimate rust prevention Right angle laser treated teeth grip better & last longer than all global competitors. Channellock blue grips are designed for durability & comfort 337 Plier

Features: Only Channellock use a knife & anvil style cutting edge to ensure perfect mating & superior cutting edge life. Laser heat treated cutting edges last 3 times longer than any other plier on the planet. Coating & blue grips as above Screwdriver

Features: Chrome Vanadium steel for longer life with Vapor-Blast tip Cushion grip handles for extra comfort [https://www.youtube.com/watch?v=FMZJi Dn D Hv Y] 420 Plier: 9. 1/2 in / 240mm 337 Plier: 7 in / 175mm 54C Slotted: 195 x 4.7mm P14C Phillips: 195 x 4.7mm Weight: 1.5kg





...

Chicago Pneumatic 8940169883 Rechargeable Torch 9 Inch / 225mm The Chicago Pneumatic Rechargeable Torch has an all Aluminium body with wrist strap. The torch has 1 super bright LED & 2 charging leads, one for 240V mains power & a car charger. Comes with a soft woven storage pouch.

Features: Bright LED
- for maximum light with low battery drain Rechargeable battery 2 charging leads All Aluminium construction Pouch  


...

Chicago Pneumatic BS39 Socket & Bit Set 1/4in Dr. (39 Piece) complete in a plastic storage box This CP BS39 is a fine set of assorted sockets & screwdriver bits & will compliment any tool set.

Features: For hand use
- not for impact tools Assorted 1/4 inch sockets & screwdriver bits with ratchet wrench & quick release bit holder Contents: 1/4" drive sockets: 6, 7, 8, 10, 11, 12, 13mm 1/4" x 25mm screwdriver bits: Slotted 4, 4.5, 6.5, 8; Star 8, 10, 15, 20, 25, 27, 30, 40; Tamper 10, 15, 20, 25, 27, 30, 40; Hex 3, 4, 5, 6; Adapter; Phillips 1, 2, 3; Pozi 1, 2, 3 Bit ratchet wrench 60mm quick release bit holder


...

Chicago Pneumatic CP2036 Straight Impact Screwdriver The CP2036 air powered Straight Impact Screwdriver is low noise & lightweight with a quick torque adjustment. Excellent for soft type materials.

Features: Straight impact screwdriver 1/4" Hexagonal quick change Double rocking dog Clutch Reversible & lever start Built-in power regulator Ergonomic with suspension bail [https://www.youtube.com/watch?v= Hj 1 Rm 1BCROc] Part number: 6151922036 Model: CP2036 Output drive: 1/4" Handle type: Straight Bit holder: Quick Change Hexagonal Female Clutch type: Impact (Double Rocking Dog) Free speed: 10000 rpm Max working torque: 11.8 in.lbs 16 Nm Min working torque: 2 1/2 in.lbs 3.4 Nm Net weight: 1.73 lb 0.78kg Length: 8.15" 207 mm Diameter: 0.91" 23 mm Min. hose

Size: 3/8" 10 mm Noise level: 83 db (A) Sound Power: 94 db (A) Vibration (ISO-8662-7): 6.9 m/s



...

Chicago Pneumatic CP7110 Pistol Grip Heavy Duty Air Hammer 3/8 Inch / 10mm Designed to handle the toughest jobs with a combination of power, light weight & compactness for ease of use. Better operator comfort comes with a unique vibration dampening body. With a 3/8 Inch / 10mm hose size & an overall length of 9 inches.

Features: Heavy-duty pistol grip hammer Standard. 401 round shank Internal muffler minimizes exhaust sound Unique vibration damping Teasing trigger for slow start-up Maximize operator comfort & control Smooth operation Low vibrations to maximize productivity Part number: 8941071101 Model: CP7110 Power (Joules) 7.2 joule Blows per minute: 3200 Cold rivet capacity: 1/4" 6.4 mm Cold rivet capacity (steel): 3/16" 4.8 mm Bore: 3/4" 19 mm Stroke: 2.63" 67 mm Chisel rivet set shank: 0.401" 10.2 mm Shank: Round Length: 9" 230 mm Average air consumption: 3.5 cfm 106 l/mn Actual air consumption: 14.6 cfm 413 l/mn Air inlet thread

Size: 0.25 " Min. hose

Size: 3/8" 10 mm Sound DBA pressure: 98.3 db (A) Sound Power: 109 db (A) Vibration (ISO-8662-14): 9 m/s





...

Chicago Pneumatic CP7110K Air Hammer Kit with 4 Chisels Designed to handle the toughest jobs with a combination of power, light weight & compactness for ease of use. Better operator comfort comes with a unique vibration dampening body.

Features: Heavy-duty pistol grip hammer Standard. 401 round shank Internal muffler minimizes exhaust sound Unique vibration damping Teasing trigger for slow start-up Maximize operator comfort & control Smooth operation Low vibrations to maximize productivity Comes With: 4 x Chisels 1 x Posi-lock Retainer Hex Key Carry Case Part number: 8941171101 Model: CP7110 Kit Power: 7.2 joule Blows per minute: 3200 Cold rivet capacity: 1/4" / 6.4 mm Cold rivet capacity (steel): 3/16" / 4.8 mm Bore: 3/4" / 19 mm Stroke: 2.63" / 67 mm Chisel rivet set shank: 0.401" / 10.2 mm Needle capacity: 0 Shank: Round Length 9" 230 mm Average air consumption 4 cfm 106 l/mn Actual air consumption 14.6 cfm 413 l/mn Air inlet thread size 0.25 " Min. hose size 3/8" 10 mm Sound DBA pressure 98.3 db (A) Vibration (ISO-8662-14) 9 m/s

...

Chicago Pneumatic CP7111 Pistol Grip Air Hammer 3/8 Inch / 10mm The Chicago Pneumatic CP7111 Pistol Grip Air Hammer has a standard. 401" round shank & aneasy change retainer for quick accessory change. It has a hose size of 3/8 Inch / 10mm.

Features: Versatile & cost effective Fast cutting action Designed for all general work Part number: 8941071110 Model: CP7111 Power (Joules): 7.2 joule Blows per minute: 3000 Cold rivet capacity: 1/4" 6.4 mm Cold rivet capacity (steel): 3/16" 4.8 mm Bore: 3/4" 19 mm Stroke: 2.63" 67 mm Chisel rivet set shank: 0.401" 10.2 mm Shank: Round Length: 6.7" 171 mm Average air consumption: 6.25 cfm 177 l/mn Actual air consumption: 25 cfm 708 l/mn Air inlet thread

Size: 0.25 " Min. hose

Size: 3/8" 10 mm Sound DBA pressure: 100 db (A) Sound Power: 111 db (A) Vibration (ISO-8662-14): 8.9 m/s





...

Chicago Pneumatic CP7115 Straight Needle Scaler The Chicago Pneumatic CP7115 is perfect for reaching surfaces in confined spaces. The needle scaler is designed to remove rust on chassis, clean up steel wheel drums & ideal for surface clean-up work of all types.

Features: General purpose needle scaler Compact & lightweight Comes with a set of needles 12 x 1/8" (3 mm) [https://www.youtube.com/watch?v=wz Pt 8h NU-UQ]   Part number: 8941071150 Model: CP7115 Power (Joules): 2.2 joule Blows per minute: 4000 Bore: 1/2" 14 mm Stroke: 1.3" 32 mm Needle capacity: 12 x 1/8 (3) Length: 11.4" 290 mm Actual air consumption: 4.1 cfm 117 l/mn Air inlet thread

Size: 0.25 " Min. hose

Size: 3/8" 10 mm Sound DBA pressure: 99 db (A) Sound Power: 110 db (A) Vibration α (ISO-28927-9): 11.4 m/s





...

Chicago Pneumatic CP7120 Straight Needle Scaler / Chisel The CP7120 Hammer from Chicago Pneumatic comes with both an adjustable sleeve with 19 needles & a 35mm wide chisel. The Scaler easily converts into a chipping hammer which is a durable & economical work solution. Delivering 4800 blows per minute its ideal for surface preparation work.

Features: General maintenance needle scaler easily converts to a weld flux chipping hammer Quick change chisel retainer Adjustable sleeve, 19 x 1/8" (3 mm) steel needles & 1.37" (35 mm) width chisel with high resistance to wear Part number: 8941071200 Model: CP7120 Power (Joules): 5.3 joule Blows per minute: 4800 Bore: 1" 25 mm Stroke: 1.18" 28.35 mm Chisel rivet set shank: 1/2" 12.7 mm Needle capacity: 19 x 1/8 (3) Shank: Square Length: 18" 457 mm Actual air consumption: 15, 5 444 Air inlet thread size 0.25 " Min. hose

Size: 3/8" 10 mm Sound DBA pressure 99 db (A) Sound Power: 110 db (A) Vibration (ISO-8662-14): 9.7 (15.6 w/chisel adapter) m/s



...