Bosch GBHGMSTWIN GBH18V-EC 18 Volt Hammer Drill & GMS100M Metal Detector Twinpack With 2 x 3 Ah Batteries & L-Boxx Carry Case GBH 18V-EC

Features: Unsurpassed combination of power & weight Best power-to-weight ratio (1.7 joules to 2.6 kg) in its class Up to 115 holes in concrete (6 x 40 mm) with one battery charge due to efficient Bosch EC motor Pneumatic hammer mechanism, optimised for drilling holes of 6-10 mm in concrete (max. 18 mm) Unique Bosch Premium lithium-ion technology for 400% longer lifetime & unbeatable battery runtime Bosch Electronic Cell Protection (ECP): protects the battery against overload, overheating & deep discharge Bosch Electronic Motor Protection (EMP) protects the motor against overload & ensures a long lifetime Bosch " Flexible Power-System": unique choice of 18 volt batteries with 3.0, 2.6, 1.3 Ah for individually adapting the runtime & weight to the particular application range. Practical battery charge level indicator: constantly shows how much energy is left in the battery Integrated LED light for illuminating the work area, even in dark places Bosch Hyper Charge: due to the rapid charging process, the batteries are charged to 75% after just half of the charge time No memory effect: the battery can be charged regardless of the charging state at any time, without damaging the cells GMS100M

Features: Best in class precise location of metal objects Lightweight handheld device that provides quick & accurate detection of metal only Detects metal as deep as 10 cm below the surface allowing for safe drilling No centre of object detection, but accurate detection of the whole object 3 light system shows the user where is safe, when there is an object nearby & where the actual object is Reliable accurate & robust, perfect for any tradesman Automatic calibration saves end user time High sensitivity detection depth of up to 10 cm with all sensors placed round the marking hole New yellow LED ring will warn of nearby objects Simplicity of use single button operation allowing for straight forward use Detection of live wire cables (5cm) Calibration free Ideal for Plumbers detecting hidden pipes, Electricians tracing power supply lines or finding general hidden dangers 1 detection mode, easy to use 2 detection scales Rubber protection Marking hole Large display LED-ring
- 3 colours Red = object detected Green = no detection Yellow = object nearby Comes With: 2 x 3 Ah Lithium-Ion Batteries Battery Charger L-Boxx Carry Case GBH 18V-EC: Max. impact energy 1, 7 J Impact rate at rated speed 0
- 4.550 bpm Battery voltage 18 V Weight incl. battery 2, 6kg Toolholder SDS-plus Drilling diameter in concrete with hammer drill bits 4
- 18 mm Optimum range of applications in concrete with hammer drill bits 4
- 10 mm Max. drilling diameter in steel 13 mm Max. drilling diameter in wood 20 mm GMS100M: Max. detection

Depth: 100 mm Max. AC scan live wire: 50 mm Detection depth, steel, max: 100 mm Detection depth, copper, max: 80 mm Automatic deactivation facility, approx: 5 min IP protection: IP54 Display backlight: Yes Acoustic signal: Yes Dimensions: 200









...

Bosch GBH 18 V-EC Rotary Hammer + GSB 18-2-LI Combi Drill with AL 1860CV Charger & 2 x 4.0 Ah batteries in LBOXX A Cordless Twinpack from Bosch with the fantastic GBH 18 V-EC Rotary Hammer which has an unsurpassed combination of power & weight. Also the GSB 18-2-LI Plus Combi Drill with an overall length of only 200mm. 2 x 4.0 Ah batteries with Bosch Electronic Cell Protection (ECP) which protects the batteries against overload, overheating & deep discharge. A fast AL 1860CV charger with an L-Boxx complete this great kit. GBH 18 V-EC Professional

Features: Long runtime (153 holes, 6 x 40 mm in concrete) with one battery charge (4.0 Ah) thanks to efficient Bosch EC motor Low weight (only 2.6 kg) & compact design for more comfortable work Highest chiselling removal rate (12 kg/hour) in its class Bosch Electronic Motor Protection (EMP) protects the motor against overload & ensures a long lifetime Bosch " Flexible Power-System": unique choice of 18 volt batteries with 3.0, 2.6, 1.3 Ah for individually adapting the runtime & weight to the particular application range. Practical battery charge level indicator: constantly shows how much energy is left in the battery Integrated LED light for illuminating the work area, even in dark places Bosch Hyper Charge: due to the rapid charging process, the batteries are charged to 75% after just half of the charge time No memory effect: the battery can be charged regardless of the charging state at any time, without damaging the cells GSB 18-2-LI Plus Professional

Features: Attractive solution for the entry-level segment of professional applications Keyless chuck with 13mm bit holder for common accessories New ergonomics: Better handling due to compact design Bosch Electronic Cell Protection (ECP): protects the battery against overload, overheating & deep discharge Electronic Motor Protection (EMP) protects the motor against overload & ensures a long lifetime Integrated LED light for illuminating the work area, even in dark places Mountable bit holder for easy transport & storage of bits on the tool Practical belt clip for conveniently hanging the tool on a belt or ladder Motor brake for precise work when driving rows of screws Comes With: 2 x 4.0 Ah Batteries L-Boxx with removable Tray with Carry Handle AL 1860 CV Charger Side Handle with Depth Stop for GBH 18 V-EC GBH 18 V-EC Professional: Max. impact energy: 1.7 J Impact rate at rated speed: 0
- 4, 550 bpm Rated speed: 0
- 1, 400 rpm Weight incl. battery: 2.6kg Length: 285 mm

Height: 218 mm Bit holder: SDS-plus Drilling diameter in concrete with hammer drill bits: 4
- 18 mm Optimum range of applications in concrete with hammer drill bits: 4
- 10 mm Max. drilling diameter in steel: 13 mm Max. drilling diameter in wood: 20 mm GSB 18-2-LI Plus Professional: Torque, max. (hard/soft): 63 / 24 Nm No-load speed (1st gear / 2nd gear): 0
- 500 / 0
- 1, 900 rpm Chuck capacity, min./max: 1.5 / 13 mm Drill spindle thread: 1/2" Weight incl. battery: 1.5kg Torque settings: 20+1 Length: 202 mm

Height: 230 mm Max. drilling diameter in wood: 38 mm Max. drilling diameter in steel: 13 mm Max. drilling diameter in masonry: 13 mm Max. screw diameter: 8 mm













...

Bosch GBHGSB36VFLI 36V Cordless li-ion SDS+ Rotary Hammer & Combi Drill Twinpack with 2 x 4 Ah Batteries, charger with 2 x L-Boxx Carry Cases Contents: GBH36VFLI SDS+ Rotary Hammer with quick change chuck GSB36VE2LI Combi drill 2 x 4 Ah batteries Battery charger Size 2 L-Boxx, Size 3 L-Boxx Side handles & depth stops for both machines GBH36VFLI

Features: As powerful as corded: 220 drilled holes (6 x 40 mm in C30/37 concrete) with only one battery charge, ideal for outdoor use Pneumatic hammer mechanism with chisel function, optimised for drilling holes of 8-16 mm in concrete (max. 26 mm) Comes complete with a keyless chuck that also makes it suitable for drilling in wood & metal with straight-shank drill bits Innovative Cool Pack batteries ensure optimum heat dissipation & therefore increase lifetime by up to 100% (cf. Li-Ion batteries without Cool Pack) More than 50% longer battery runtime due to new 4.0 Ah batteries (cf. 36 V/2.6 Ah) Bosch Electronic Cell Protection (ECP): protects the battery against overload, overheating & deep discharge No memory effect: the battery can be charged regardless of the charging state at any time, without damaging the cells 3 functions: drilling, hammering, chiselling GSB36VE2LI

Features: Extremely powerful: 100 Nm for the toughest screwdriving & drilling applications in wood & metal, & impact drilling applications in masonry up to 20 mm More than 50% longer battery runtime due to new 4.0 Ah batteries with Bosch Cool Pack (cf. 36 V / 2.6 Ah) Perfect control over the tool thanks to innovative Electronic Rotation Control (ERC)
- detects sudden jamming & shuts the tool down Newly developed auxiliary handle with wave profile & easy locking mechanism for fast mounting & dismantling & a secure fit Electronic Motor Protection (EMP) with additional temperature sensor
- protects the motor against overload & ensures a long lifetime Innovative Cool Pack batteries ensure optimum heat dissipation & therefore increase lifetime by up to 100% (cf. Li-Ion batteries without Cool Pack) Bosch Electronic Cell Protection (ECP): protects the battery against overload, overheating & deep discharge Integrated LED light with afterglow function for illuminating the work area, even in dark places GBH36VFLI: Rated power input: 600 W Max. impact energy: 2.8 J Impact rate at rated speed: 0
- 4, 260 bpm Rated speed: 0
- 960 rpm Battery voltage: 36 V Battery capacity: 4 Ah Weight incl. battery: 4.5kg Length: 396.0 mm

Width: 107.0 mm

Height: 221.0 mm Toolholder: SDS-plus Drilling diameter in concrete with hammer drill bits: 4
- 26 mm Optimum range of applications in concrete with hammer drill bits: 8
- 16 mm Max. drilling diameter in steel: 13 mm Max. drilling diameter in wood: 30 mm GSB36VE2: Torque, max. (hard/soft): 100 / 60 Nm No-load speed (1st gear / 2nd gear): 0
- 420 / 0
- 1, 800 rpm Max. impact rate: 27, 000 rpm Chuck capacity, min./max: 1.5 / 13 mm Battery voltage: 36 V Battery capacity: 4 Ah Weight incl. battery: 3.4kg Keyless chuck: 13 mm Charging time, approx: 80 mins Torque settings: 25+1 Length: 248 mm

Height: 280 mm Cell type: Lithium-ion Max. drilling diameter in wood: 102 mm Max. drilling diameter in steel: 16 mm Max. drilling diameter in masonry: 20 mm Max. screw diameter: 12 mm

















...

Bosch GCB18VLI 18 Volt Cordless lithium-ion Band Saw
- Body Only in L-Boxx Carry Case

Features: Integrated


...

Bosch GCL 2-15 Professional Combi Laser with Cross Line & 2-Point + RM1 Rotating Mount, Ceiling Clamp, Target & Carry Case This Combi Laser combines the advantages of point & cross line lasers in one tool, simplifying any levelling or transfer work over short distances with accuracy of ...

Bosch GCL 2-50 C Professional 12V Combi Laser + RM3 Mount, USB (Universal Serial Bus) Charger & GAL 1230 CV Charger in L-Boxx (2 x 2.0 Ah Batteries) The Bosch GCL 2-50 C Combi Laser can be used for various levelling & transfer jobs. Ideal for the following applications: Suspended ceiling installation. Aligning dry walls using vertical laser lines. Installing air-conditioning & electronics systems thanks to easy transfer of plumb points. Transferring entire lighting grids. Levelling surfaces for interior finishing work such as aligning final reference markings for accurate positioning. Levelling is even easier & quicker using a smartphone together with the right Bosch Levelling Remote App
- by connecting your smartphone to the combi laser, the tool can be positioned & finely adjusted without the need for direct contact. Once the combi laser has been set up, the lines & plumb points can be switched on & off at the tap of a finger. Need a break? Then simply put the tool into st&-by mode using your smartphone.

Features: Smart functions for maximum productivity Horizontal & vertical laser lines & two centred plumb points with optimal visibility Versatile to use with rotating multifunctional mount for a variety of mounting possibilities High visibility of the laser lines with a working range of 20 m (without receiver) Working range of 50 m with the LR 6 or LR 7 Professional receiver (optional) Pendulum lock ensures safe transport Bluetooth connection to Smartphone for remote control & adjustment of the tool Precise positioning of the laser lines around the plumb points
- motorized positioning with RM 3 Professional (optional), using an app or remote control or manual positioning with RM 2 Professional Comes With: Rotating mount RM3 2 x 12V 2.0 Ah Batteries USB (Universal Serial Bus) Battery Adapter RC2 remote control + 3 x AAA Batteries Laser target plate Protective bag Quick charger GAL 1230 CV L-Boxx Laser diode: 635
- 650 nm Operating temperature: -10
- 50





...

Bosch GCL 2-50 C Professional Combi Laser + RM2 Mount (4 x 1.5 V LR6 (AA) Batteries) The Bosch GCL 2-50 C Combi Laser can be used for various levelling & transfer jobs. Ideal for the following applications: Suspended ceiling installation. Aligning dry walls using vertical laser lines. Installing air-conditioning & electronics systems thanks to easy transfer of plumb points. Transferring entire lighting grids. Levelling surfaces for interior finishing work such as aligning final reference markings for accurate positioning. Levelling is even easier & quicker using a smartphone together with the right Bosch Levelling Remote App
- by connecting your smartphone to the combi laser, the tool can be positioned & finely adjusted without the need for direct contact. Once the combi laser has been set up, the lines & plumb points can be switched on & off at the tap of a finger. Need a break? Then simply put the tool into st&-by mode using your smartphone. This model of the GCL 2-50 C comes with a battery adapter cradle which holds 4 x 1.5 V LR6 (AA) Batteries. It is Dual Power Source & can be operated with 12V or 10.8V V-LI-ion batteries, (not supplied).

Features: Smart functions for maximum productivity Horizontal & vertical laser lines & two centred plumb points with optimal visibility Versatile to use with rotating multifunctional mount for a variety of mounting possibilities High visibility of the laser lines with a working range of 20 m (without receiver) Working range of 50 m with the LR 6 or LR 7 Professional receiver (optional) Pendulum lock ensures safe transport Bluetooth connection to Smartphone for remote control & adjustment of the tool Precise positioning of the laser lines around the plumb points Comes With: 1 x Battery Adapter 4 x 1.5 V LR6 (AA) Batteries Rotating mount RM2 Laser target plate Protective bag


...

Bosch GCL 2-15 Combi Laser with Cross Line & 2-Point + RM1 Rotating Mount BT150 Tripod, Target Plate & Protective Bag This combi laser combines the advantages of point & cross line lasers in one tool, simplifying any levelling or transfer work over short distances with accuracy of ±0.3mm/m. The laser lines are highly visible for fast horizontal or vertical levelling tasks. With the aid of the included RM1 rotating mount, the user can easily position the laser lines around the plumb points
- making levelling tasks faster, more precise & more convenient.

Features: Horizontal & vertical laser lines & two centred plumb points with optimal visibility Laser lines can be positioned around the centred plumb points Flexible to use with rotating RM 1 Professional multifunctional mount for aligning the laser lines & for versatile mounting of the tool Small, lightweight, always within reach Versatile use due to multifunctional mount Robust design with softgrip covering protects against knocks Pendulum lock ensures safe transport Easy handling due to single-handed operation & intuitive user interface Line & point mode freely selectable Horizontal & vertical self-levelling up to ±4° Applications: Drywall installation Levelling work Suspended ceiling installation Tiling Interior fitting work Point transfer Comes with: 3 x 1.5 V LR6 (AA) BT 150 Professional building tripod L-Boxx Inlay Protective bag RM1 Professional rotating mount Target plate


...

Bosch GCL250CGB Green line Combi Laser With Universal Mount & USB (Universal Serial Bus) Adapter in L-Boxx (2 x 2 Ah Batteries) The Bosch GCL250CGB 12V Cordless Green Line Combi Laser can be used for various levelling & transfer jobs. It comes with bluetooth connection for remote control & adjustment of the tool from any smartphone including over large distances. This combi laser offers a wroking distance of 20m (without receiver) but a working distance of 50m with the LR6 or LR7 Professional receiver (optional).

Features: Horizontal & vertical laser lines & two centred plumb points with optimal visibility Precise positioning of the laser lines around the plumb points
- motorised positioning with RM 3 Professional (optional), using an app or remote control or manual positioning with RM 2 Professional High visibility of the laser lines with a working range of 20 m (without receiver) Working range of 50 m with the LR 6 or LR 7 Professional receiver (optional) Pendulum lock ensures safe transport Green horizontal & vertical lines for maximal visibility Bluetooth connection to smartphone for remote control & adjustment of the tool Dual Power Source: Can be operated both with 12 V-LI-ion battery & with standard alkaline batteries Comes With: 1x GCL 2-50 CG Green Combi Laser 1x RM2 Rotating Mount 1x BM3 Mount 2x GBA 12V 2.0 Ah Li-Ion Batteries 1x GAL 1230 CV Charger 1x GAA 12V USB (Universal Serial Bus) Adapter 1x Laser Target Plate 1x Protective Bag [https://www.youtube.com/watch?v=QQPG8u Wh Nx 8] Power Source: 12v Laser diode: 635-650 nm laser class: 2 Working range: 20m Working range with receiver: 50m Accuracy:


...

Bosch GCL25BS Combi Laser with Tripod
- combines a cross line laser & 5 point laser in one mobile unit

Features:


...