Stanley Intelli Tools 1-77-123 CLLi Cross Line Laser Kit with Pole

Features: Cross line laser kit 25 Meter range

...

Stanley Intelli Tools FMHT0-77407 Stud Finder 300 The Stud Sensor 300 uses electronic signals to locate the center of studs, joistsor live AC wires through drywall or other common building materials. Oncethe center of a stud has been detected in one pass across the surface, the Stud Sensor 300 gives a visual display & sounds an audible tone. A markingchannel means that you can easily note the stud center & edges on the wall. The Stud Sensor 300 will not detect objects in concrete, mortar, block or brickwork, carpeting, foil faced materials, metallic surfaces or ceramic tiles. The Stud Sensor 300 is not designed to locate non-ferrous or plastic objects suchas pipes

Features: Backlit LCD screen clearly displays all of the sensor's readings, even in low light conditions Wood & metal stud detection through up to 1-1/2 " deep surface material AC detection identifies live wires up to 2" deep One Pass™ center-find technology locates stud centers Deep metal scan senses metal through up to 3" of material Auto-calibration Marking channel improves accuracy of marking-out readings New ergonomic design, & soft grips provide comfort & control of the tool At 35-55% relative humidity) Battery 9 volt (not included) Depth Range: Wood or Metal Studs Up to 1-1/2" (38 mm) through drywall Live AC Wires (120 volts AC) Up to 2" (50 mm) through drywall METAL SCAN Mode Up to 3" (76 mm) through drywall Accuracy
- Stud Center Wood


...

Stanley Intelli Tools STHT0-77403 Stud Finder 100 The Stud Sensor 100 uses electronic signals to locate the edges of studs, joists or live AC wires through drywall or other common building materials. Once the edge of a stud has been detected, the Stud Sensor 100 displays red LED's & sounds in audible tone. A marking channel means that you can easily note the stud edges on the wall. Powered by a 9 Volt Battery which is not included.

Features: Wood & metal stud detection through up to 3/4" deep surface material AC detection identifies live wires up to 2" deep Sequential LEDs & audible beeps indicate reading Marking channel with LED identifies target & makes marking surfaces easy & accurate New ergonomic design, & soft grip buttons provide comfort & control of the tool   Battery 9 volt (not included) (At 35-55% relative humidity) Depth Range
- Wood or Metal Studs Up to


...

Stanley Intelli Tools STHT1-77139 TLM 165 Laser Measure 50m

Features: Range 165' (50m) / Accuracy +/- 1/16"

...

Stanley Intelli Tools STHT1-77340 Cubix Self Levelling Cross Line Laser The Stanley Fat Max Cube Cross Line Self-Levelling Laser Level has a pendulum mounted laser with an effective indoor range up to 10m, ideal for DIY / internal use. It is built to last, made from ABS / TPR construction & is accurate to 0.5mm/m. Supplied with a universal mounting bracket with multi attachment points for flexibility. It can be attached to architrave, window sills, shelves, poles etc. Powered by 2 x AA Batteries which are supplied.

Features: Indoor range of up to 10 meters Supplied with Mounting bracket ABS/TPR construction Pendulum mounted laser Accurate to 0.5mm/m Project 1 horizontal & 1 vertical line to create a cross line (V:130

...

Stanley Intellilevel 1-77-176 DMW30 Digital Measuring Wheel The Stanley 77-176 DWM30 digital measuring wheel allows for Bi-directional measurement (measures in either direction) & automatic conversion of units of measurement. It can store up to 8 measurements in memory, auto power off after 2 minutes of suspended use as well as a manual power off.

Features: Bi-directional measurement (measures in either direction) Automatic conversion of units of measurement Stores up to 8 measurements in memory Auto power off after 2 minutes of suspended use Manual power off Heavy-duty, metal folding handle & rubber grip Folding wheel mount Diecast aluminium wheel, wear resistant rubber tread Folding kick stand Rugged construction for outside use Comes with: Manual Carry bag

...

Stanley Quickslide Utility Knife + 100 Heavy Duty Blades This e Xclusive Toolstop Deal consists of the Stanley 0-10-810 Quickslide Pocket Utility Knife & the Stanley 8-11-921 Knife Blades Heavy-Duty Pack of 100 Dispenser. 0-10-810

Features: All metal construction
- solid, reliable & long lasting One handed operation blade slider
- extends the blade easily & quickly Push down & slide safety feature
- ensures the blade is not accidentally extended Metal belt clip Pocket size for convenience Accepts all standard Stanley blades 8-11-921

Features: Heavy-duty, general purpose blade 1992B Ideal for carpet, vinyl & any other material requiring a stiffer & stronger blade Push blade dispenser 10 x 10 blades    






...

Stanley Rabone 0-35-406 64SR Chrome Rule 1m / 39in Rustless steel rule, chrome anti-glass finish which provides a marked contrast to the permanent black figures & graduations

Features: Dual marked imperial & metric Two sides, four edges Inches, 16ths, 32nds, 64ths, 20ths, 50ths, 100ths mm, 1/2mm. Figured every 10mm in mm Length: 1000mm (39 in)
Width: 25mm Thickness: 1mm Net Weight: 0.226kg


...

Stanley STHT0-05622 Stainless Steel Outside Corner Tool

Features: Bi-Material handle for comfort & protection

...

Stanley STHT0-05897 Margin / Window Trowel 82mm x 101mm The Stanley STHT0-05897 Margin / Window Trowel won't rust & has a tough construction. With a comfortable handle seamlessly attached to the blade.

Features: Stainless Steel Blade prevents rusting & provides durability Bi-Material Handle for comfort & protection

...