More From Contributor

£2.00
Stanley 9-83-079 25mm Metal Spring Clamp

Features:
Injection moulded jaw pads will not mark or damage work

...
Archived Product
£2.00
Stanley 9-83-080 Metal Spring Clamp 50mm (Single)

Features:
Metal Spring Clamp Injection moulded jaw pads to

...
Archived Product
£99.95
Stanley B6CC304SCR D200/8/24 Air Compressor 24 Litre, 1.5HP, 8 Bar, 240V

Features:
Ideal for workshop &

...
Archived Product
£4.00
Stanley 0-68-012 6 Way Screwdriver The Stanley 6-Way All-in-one screwdriver is perfect for anyone who needs the constant use of different screwdrivers. With 6 of the most common tips which are easily interchangeable this is the ideal product for your pocket & will cover most screwdriving jobs.

Features:
All in one screwdriver with six tips Ideal for car glove box or kitchen drawer Soft grip rubber with diamond texture for a firm comfortable grip Built in bolster for additional turning power & strength Quality bits give a long life Comes with: 6 Tips PH1 & PH2 2 x slotted 2 nut drivers (1/4in & 5/16in) Net Weight: 0.176kg

...
Archived Product
£122.95
Stanley CARPSET 4 & 9.1/2 Planes & 4 Piece Chisel Set in Organiser The Stanley CARPSET is a great carpenters set with a No. 4 Bench Plane, a 9.1/2 Block Plane & 4 Dynagrip Bevel Edge Chisels. Supplied in a handy Sort Master organiser. No.4 Smoothing Plane: The extremely popular No. 4 smoothing plane has been designed for final finishing of cabinet & general joinery work, with a 45mm blade width It is made from accurately machined fine grey iron castings & have a simple & rapid adjustment mechanism, with easy blade removal for sharpening & finger tip adjustment for depth of cut & cutter alignment A black epoxy finish with plated parts & chrome carbon cutter enhances the attributes of this models 9.1/2 Block Plane: The 9.1/2 Block plane has a body made from fine grey iron, which is precision machined It is fully adjustable for depth of cut, cutter alignment & size of mouth It is ideal for end grain & general purpose fine finishing work The precision carbon alloy steel blade is 40mm wide Chisel Set: The Dynagrip Chisels have a steel striking cap handle, which can be used with a steel hammer They have a long, soft grip handle for enhanced grip & control, forged high carbon steel reassurance of strength & durability & the pre-sharpened blade is ready for immediate use The set contains the following

Sizes:
6mm (1/4 inch),  12mm (1/2 inch), 18mm (3/4 inch) & 25mm (1 inch) Sortmaster Organiser: The  Sort Master Organiser is made from polypropylene,  and has a virtually unbreakable, transparent lid to allow the contents to be viewed easily It features a waterproof seal that not only prevents water, but also rust & foreign particles from entering A plastic handle with textured grip allows the organiser to be transported comfortably, while the organiser's lid has been specially designed to ensure that the compartments are held securely in place & fastens with two metal latches For added versatility, multiple organisers can be clipped together using the side latches Comes With: Nylon Tool Holster with belt loop.   Net Weight: 6kg

...
Archived Product
£19.49
Stanley EXTAPE Extreme 5m Tape with Compact Chalk Line Stanley Fat Max 5m / 16ft Tape with high visibility blade for easy reading & belt clip for ease of use. Also the Stanley 9 Metre Compact Chalk Line with 3:1 rewind gear ratio for faster retraction.   Stanley 5-33-886 Fat Max Xtreme Tape Measure

Features:
Blade Armor coating on the first 150mm reduces the risk of breaking the tape by 95% Cushion grip provides sturdy, slip-resistant hold Huge standout of almost 4 metres for easy one person measuring 32mm wide blade makes reading the numbers easy Mylar

...
Archived Product
£25.00
Stanley Fatmax Folding Retractable Knife + 100 Heavy Duty Blades This e Xclusive Toolstop Deal consists of the Stanley 0-10-825 Fatmax Retractable Folding Knife & the Stanley 8-11-921 Knife Blades Heavy-Duty Pack of 100 Dispenser. 0-10-825

Features:
Takes seconds to change the blade Blades can be stored in the handle for safe keeping Suitable for all job applications from carpet fitting, model making & craft design to electrical instillation
- the list is endless Retractable blade offers safety & convenience 8-11-921

Features:
Heavy-duty, general purpose blade 1992B Ideal for carpet, vinyl & any other material requiring a stiffer & stronger blade Push blade dispenser 10 x 10 blades    




...
Archived Product
£32.95
Stanley 2-34-777 Fibreglass Power Winder (100m)

Features:
Folding tru zero end hook for accurate inside & outside

...
Archived Product
£17.95
Stanley 2-34-772 Fibreglass Power Winder (30m)

Features:
Folding tru zero end hook for accurate inside & outside

...
Archived Product
£25.00
Stanley 2-34-775 Fibreglass Power Winder (60m)

Features:
Folding tru zero end hook for accurate inside & outside

...
Archived Product

Stanley Cubix Self Levelling Cross Line Laser With S100 Stud And Cable
Detector

Stanley Cubix Self Levelling Cross Line Laser with S100 Stud and Cable Detector This eXclusive Toolstop Deal consists of the Stanley STHT1-77340 Cubix Self Levelling Cross Line Laser and the STHT0-77403 Stud Finder 100. The Stanley Cube Cross Line Self-Levelling Laser Level has a pendulum mounted laser with an effective indoor range up to 10m, ideal for DIY / internal use. It is built to last, made of ABS / TPR construction and is accurate to 0.5mm/m. Supplied with a universal mounting bracket with multi attachment points for flexibility. It can be attached to architrave, window sills, shelves, poles etc. Powered by 2 x AA Batteries which are supplied. The Stud Sensor 100 uses electronic signals to locate the edges of studs, joists or live AC wires through drywall or other common
building materials. Once the edge of a stud has been detected, the Stud Sensor 100 displays red LED's and sounds in audible tone. A marking channel allows you to easily note the stud edges on the wall. Powered by a 9 Volt Battery which is not included. Cross Line Laser Features: Indoor range of up to 10 meters Supplied with Mounting bracket ABS/TPR construction Pendulum mounted laser Accurate to 0.5mm/m Stud Finder Features: Wood and metal stud detection through up to 3/4" deep surface material AC detection identifies live wires up to 2" deep Sequential LEDs and audible beeps indicate reading Marking channel with LED identifies target and makes marking surfaces easy and accurate New ergonomic design, and soft grip buttons provide comfort and control of the tool   STHT1-77340
Project 1 horizontal and 1 vertical line to create a cross line (V:130
RIP - This product is no longer available on our network. It was last seen on 21.11.2018

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
  • Availability: Out Of Stock
  • Supplier: Toolstop
  • SKU: DEAL-00167
Availability: In Stock
£54.00

Product Description

Stanley Cubix Self Levelling Cross Line Laser with S100 Stud & Cable Detector This e Xclusive Toolstop Deal consists of the Stanley STHT1-77340 Cubix Self Levelling Cross Line Laser & the STHT0-77403 Stud Finder 100. The Stanley Cube Cross Line Self-Levelling Laser Level has a pendulum mounted laser with an effective indoor range up to 10m, ideal for DIY / internal use. It is built to last, made from ABS / TPR construction & is accurate to 0.5mm/m. Supplied with a universal mounting bracket with multi attachment points for flexibility. It can be attached to architrave, window sills, shelves, poles etc. Powered by 2 x AA Batteries which are supplied. The Stud Sensor 100 uses electronic signals to locate the edges of studs, joists or live AC wires through drywall or other common building materials. Once the edge of a stud has been detected, the Stud Sensor 100 displays red LED's & sounds in audible tone. A marking channel means that you can easily note the stud edges on the wall. Powered by a 9 Volt Battery which is not included. Cross Line Laser

Features:
Indoor range of up to 10 meters Supplied with Mounting bracket ABS/TPR construction Pendulum mounted laser Accurate to 0.5mm/m Stud Finder

Features:
Wood & metal stud detection through up to 3/4" deep surface material AC detection identifies live wires up to 2" deep Sequential LEDs & audible beeps indicate reading Marking channel with LED identifies target & makes marking surfaces easy & accurate New ergonomic design, & soft grip buttons provide comfort & control of the tool   STHT1-77340 Project 1 horizontal & 1 vertical line to create a cross line (V:130

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

LED - Light Emitting Diode - a small light source
AC - Alternating Current
Ergonomic - A specific design to fit the purpose of the user
Battery - A device used for the storage of electricity
Batteries - Portable Power sources in cell form
soft - A descriptive word for an item/sound which is gentle to the touch or ears
Cable - A series of wires bonded to form a single thread
Sounds - Audible notes that can be heard using ears
Wall - A physical barrier between two areas
Red - One of the three primary colours
Wood - A hard material found in trees. Used for tool making, fuel and construction.
edge - Enhanced data rates for GSM evolution also known as enhanced GPRS. A mobile phone technology with improved data transmission rates.
edge - The point at which two surfaces meet
DIY - Do It Yourself
Comfort - something that feels nice to the user. Often relaxing.
Studs - a small often round metal object, can be used in fashion or industry
LED - Light Emitting Diode. A bulb that is very efficient at producing light. Often small.
Accurate - A measurement of precision when all elements are correct.
Pendulum - A heavy hung weight that swings back and forth, for example in a clock.
Exclusive - Something that is not including other things.
Design - A drawing or styles that shows the look and functionality of something before its made.
Ideal - Something that satisfies a perfect criteria.

Supplier Information

Toolstop
Page Updated: 2020-07-29 10:35:21

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu