SIP 09160 Turbofan 3000 Heater The SIP 09160 Turbofan fan heater is highly portable due to its light weight, but also retains their toughness & durability through quality manufacturing. These heaters are perfect for small garages, workshops, offices & domestic use from a 240v (13amp) plug.

Features: Highly portable due to its light weight Perfects for small garages, workshops & offices 2 heat output levels: 1x Fan/1x Heat Thermostatically controlled Lightweight Turbo fan design Can also be a conventional fan Heavy duty painted finish Cooling fan facility NOT recommended for use with an extension cord

...

SIP 09193 Fireball 37 Ceramic Heater 240 Volts

Features: superb quality heater heats the object not

...

SIP 09294 72XRDT Infrared Diesel/ Paraffin Heater The SIP 09294 72XRDT Infrared Diesel/ Paraffin Heater is a reliable & efficient heater & has a heavy duty painted finish for extra durability.

Features: 240V (13amp) supply 70, 000 BTU/hr (20.5k W) max. heat output Thermostatically controlled LED temperature display panel 10.5 litre steel-constructed fuel tank Heavy duty painted finish for extra durability Timed cooling of the combustion chamber Supply: 240V 13amp Fuel Type: Diesel/ Kerosene Heat Output: 70, 000 BTU/hr (20k W) Fuel Consumption (approx.): 1.9 litre/hr Fuel Tank Capacity: 10.5 litres Min. Clearance: Top 1500mm, Side 1500mm, Rear 1500mm, Front 2500mm Net Weight: 19.5kg Packaged Dimensions: 555 x 335 x 575mm

...

SIP 09564 100XD Space Heater SIP 09564 is a powerful rugged heater ideal for heating workshops, farm buildings & garages. It has a heavy-duty powder coated finish which offers superb durability.

Features: 240V (13amp) supply 100, 000 BTU/hr (29.3k W) heat output 700m³ (24, 720 cu.ft) approx. heating area 2.8 litre/hr average fuel consumption Wheel mounted for easy movement Heavy duty powder coated finish Built-in thermostat with digital temperature read-out Steel tank construction 40 litre fuel tank capacity Comes with: 12 months warranty

...

SIP 09566 Fireball 125XD Paraffin/ Diesel Heater The SIP Fireball 125XD Space Heater has a steel tank construction, built-in thermostat with digital temperature read-out & comes with 12 months warranty. This powerful, hard wearing heater can run on diesel & paraffin/kerosene & is ideal for heating workshops, farm buildings & garages.

Features: Heavy duty powder coated finish offers great durability Wheel mounted for easy transportation Runs from Diesel/ Paraffin/ Kerosene Easy to read fuel gauge Built-in thermostat & digital temperature read-out 125, 000BTU (36.6k W) heat output 900m

...

SIP 25020 P200W DC Alleycat Welding Generator Petrol, complete with Honda 11 Hp petrol engine, 14 switched welding power outputs & low oil shutdown to prevent engine damage. Manufactured in the UK by SIP utilising Honda engines, the SIP Alleycat DC range of welding generators has been designed to fulfill the requirements of providing mobile & independent welding & AC auxillary power supply solutions for a tremendous variety of applications. All units deliver the utmost reliability utilising only the very best components available. Machines are constructed with full cradle frames or are wheel mounted. DC welding output allows the use of specialist electrodes for ferrous & non ferrous metals whilst the auxillary power outputs provide standard 115/230v AC power enabling the use as a stand alone generator.

Features: Honda 11 Hp OHV Petrol Engine
- Over head valve design offers extended engine life, excellent fuel economy & reduced oil consumption 170 Amp DC Welding Capacity
- Capable of utilising up to 4mm standard & specialist electrodes Auxillery generator output
- 3 Kva output at 115/130v AC 50 Hz 14 Switched Welding power outputs
- Allowing easy welding output adjustment from 45 to 170 amps Full frame non wheel mounted option available
- Order item No. SIP 25018 (P170F-DC) Hot spark electronic ignition
- Easy reliable maintenance free starting Low Oil Shutdown
- Stops engine to help prevent serious damage due to lack of oil Inclined cylinder & counter balance shaft
- Reduces engine vibration to an absolute minimum & ensures smoothest possible running Dual element air filter
- Engine runs cleaner & lasts longer Splash fed lubrication system
- Protects internal engine parts & bearings by constantly supplying them with oil ensuring reliability & longer life Heavy Duty Alternator Brush-less alternator design
- Reliable maintenance free consistent output Turbo fan cooled
- Enables higher outputs for longer periods Thermal overload
- Maximum protection guaranteed Dinse plug connections
- Faster more secure & convienient electrode holder & earth clamp attachment 1 Year engine warranty
- For piece of mind, covered directly by Honda Accessory Option
- Use you existing accesories to your requirements Accessory kit SIP05105 is available as an optional extra Electrode Sizes
- 1.5
- 4.0 Weld Current Output Range Amps
- 45
- 170 Open Circuit Voltage
- 79 Weld Current Output Type
- DC Auxillary Output 50 Hz AC Volts
- 110 / 230 Auxillary Output Kva Max
- 3 Insulation
- Class H Protection
- IP21 Engine
- Honda GX340 Hp
- 11 Fuel
- Unleaded Petrol Fuel Tank Capacity Litres
- 6.5 Full load Approx Run Time Hours
- 2.4 Frame Type
- Wheel Mounted Full Cradle Output At 60% Duty Amps
- 155 Packed

Dimensions (Hx Wx L) mm
- 670 x 580 x 1060 Weight Kgs
- 75 Approx Weld Thickness Range (Mild Steel) mm
- 1.5
- 7








































...

SIP 25087 Spotmatic P1PM Spot Welder complete with general purpose standard arms & 1 year warranty. The Spotmatic range of welders are extremely lightweight & provide fast & consistent spot welds.
Features: Excellent balance which helps to minimise user fatigue Large arm clearance which provides a 96 mm arm clearance facilitating welding access Lasting quality
- the design, construction & componentry promote reliability & longevity Single phase operation
- operates from 20 amp (delayed action) fuse Comes supplied with general purpose standard arms A huge variety of additional arms & electrodes are available to order Fully adjustable tip pressure for greater material & thickness versatility Manual timer & compensation circuit to allow the welding of oxidised, zinc coated or paint residued sheet High output
- 5750 amps maximum welding current providing weldingthickness versatility Heavy duty transformer
- provides 2KVA @ 50% duty cycle 2mm plate welding capability at a rate of 60 spots per hour for 2+2 sheet mild steel Superb welding speed willl weld 1.2mm sheet mild steel (1.2+1.2) at a rate of 260 spots per hour Comes with: General purpose standard arms 1 year warranty  Max. Thickness (Mild Steel) Spot/ Hour Spot Diameter 1.2mm + 1.2mm 260 4.5mm 1.5mm + 1.5mm 120 5.0mm 1.8mm + 1.8mm 100 5.5mm 2mm + 2mm 60 6.0mm 6mm + 6mm Diameter Rod 2002KVA @ 50% Duty Cycle Arm Length: 125 / Sheet Steel: 2mm+2mm / Rod: 6mm+6mm Arm Length: 250 / Sheet Steel: 1.8mm+1.8mm / Rod: 5.5mm+5.5mm Arm Length: 350 / Sheet Steel: 1.5mm+1.5mm / Rod: 4.5mm+4.5mm Arm Length: 500 / Sheet Steel: 1.2mm+1.2mm / Rod: 3.5mm+3.5mm




...

SIP 25088 Spotmatic P2PT Spot Welder complete with general purpose standard arms & 1 year warranty. The Spotmatic range of welders are extremely lightweight & provide fast & consistent spot welds.

Features: Excellent balance which helps to minimise user fatigue Large arm clearance which provides a 96 mm arm clearance facilitating welding access Lasting quality
- the design, construction & componentry promote reliability & longevity Single phase operation
- operates from 20 amp (delayed action) fuse Comes supplied with general purpose standard arms A huge variety of additional arms & electrodes are available to order Fully adjustable tip pressure for greater material & thickness versatility Electronic timer & compensation circuit to allow the welding of oxidised, zinc coated or paint residued sheet High output
- 5750 amps maximum welding current providing welding thickness versatility Heavy duty transformer
- provides 2KVA @ 50% duty cycle 2mm plate welding capability at a rate of 60 spots per hour for 2+2 sheet mild steel superb welding speed willl weld 1.2mm sheet mild steel (1.2+1.2) at a rate of 260 spots per hour Comes with: General purpose standard arms 1 year warranty   Max. Thickness (Mild Steel) Spot/ Hour Spot Diameter 1.2mm + 1.2mm 260 4.5mm 1.5mm + 1.5mm 120 5.0mm 1.8mm + 1.8mm 100 5.5mm 2mm + 2mm 60 6.0mm 6mm + 6mm Diameter Rod 200 2KVA @ 50% Duty Cycle Arm Length: 125 / Sheet Steel: 2mm+2mm / Rod: 6mm+6mm Arm Length: 250 / Sheet Steel: 1.8mm+1.8mm / Rod: 5.5mm+5.5mm Arm Length: 350 / Sheet Steel: 1.5mm+1.5mm / Rod: 4.5mm+4.5mm Arm Length: 500 / Sheet Steel: 1.2mm+1.2mm / Rod: 3.5mm+3.5mm





...

SIP 25115 180AMP DC Heavy Duty Welder/ Generator Our 180AMP Welder/ Generator is ideal for when power services are limited. Powerful & robust, this unit offers longevity & economy, making any task much easier.

Features: Electric start & recoil 230v / 110v supply take-off 180amps @ 60% duty cycle 9.5 hours full load running time 5.5k W generator rated output 25.0 litre maximum fuel capacity 15.0hp OHV petrol engine (unleaded) 1.6mm
- 5.0mm maximum electrode size 1.5mm
- 8.0mm weld thickness (mild steel) 40amps
- 190amps (DC) output current AVR
- Automatic Voltage Regulator Wheel mounted for easy movement Foldable handles for ease-of-use Electric Start: Yes Engine Type: 15.0hp OHV Output Current: 40amps
- 190amps (DC) Open Circuit Voltage: 75.0v Duty Cycle: 180amps @ 60% Electrode: 1.6mm
- 5.0mm Weld Thickness: 1.5mm
- 8.0mm Generator Supply: 110v / 230v Generator Output: 5.5KVA Fuel Tank Capacity: 25.0 litres Full Load Run Time: 9.5 hours Insulation: Class B Protection: IP21 Gross Weight: 110.0kg Packaged Dimensions: 770 x 590 x 585mm Additional: AVR








...

SIP-01701 B16-12 Bench Pillar Drill Our range of SIP professional bench & floor pillar drills are capable of drilling metals, woods & plastics. Designed for reliability & maximum performance.

Features:   240V (13amp) supply Powerful 375w motor 16.0mm drilling capacity 3.0mm
- 16.0mm chuck capacity Magnetic NVR switch for added safety 12 speeds (300
- 2550rpm) speed range Aluminium motor housing with fan coolingfor added enhanced heat dissipation Sturdy cast iron tilting table with slots Easy lock motor adjustment 2 year warranty   Supply: 240v (13amp) Motor: 375w Spindle Taper: B16 Max. Spindle: Stroke 60mm Drilling Capacity: 16mm (mild steel) Swing: 260mm Chuck Capacity: 3.0mm
- 16mm Speed Settings: 12 settings Speed Range: 300
- 2550rpm Overall

Height: 840mm Packaged Dimensions: 665 x 410 x 260mm







...