Trend CSB/21060TC Craft Pro Saw Blade 210mm x 60 Teeth x 30mm The Trend CSB/21060TC sawblade is intended to be used in a portable or stationary sawing machine. The Craft Pro Tungsten Carbide Tipped blade is designed for fine trim & finishing & a slower feed rate. Fits Dewalt DCS7485 Table Saw 54V.

Features: Thin kerf sawblade for cordless saws Sawblades designed for a professional finish in soft wood, hard wood, plasterboard, stone fibre board, particle board, veneer, plywood, MDF & hardboard Reamed bore to ensure precise fit to spindle Silverbraze to ensure tip is bonded securely to body Body hardened & tempered to maintain trueness Laser etched on reverse to European standard EN847-1/2 The Trend name for traceability & a guarantee of quality High grade alloy steel plate body precision ground to maintain flatness

...

Trend CSB/23024 Craft Pro Saw Blade 230mm x 24 Teeth x 30mm This sawblade is intended to be used in a portable or stationary sawing machine. Craft Pro Tungsten Carbide Tipped General Purpose Sawblades are designed for a medium / coarse finish in softwood, hardwood, exotic timber, plaster board & stone fibre board. With less teeth which is preferred for ripping along the grain of hard & soft wood & other wood based material. For a coarser finish & faster feed rate. Compatible with all sawing machines though bushing washers may be required for some models. Features quality carbide tips for high wear resistance. With a reamed bore to ensure precise fit to spindle.

Features: Silverbraze to ensure tip is bonded securely to body Body hardened & tempered to maintain trueness Laser etched on reverse to European standard EN847-1/2 The Trend name for traceability & a guarantee of quality High grade alloy steel plate body precision ground to maintain flatness Microgranular Tungsten Carbide Tipped to allow cutting of abrasive materials Warranty: 12 months

...

Trend CSB/23524 Craft Saw Blade 235mm X 24 Teeth X 30mm

Features: A range of Tungsten Carbide Tipped Circular

...

Trend CSB/23540 Craft Pro Saw Blade 235mm x 40 Teeth x 30mm This sawblade is intended to be used in a portable or stationary sawing machine. Craft Pro Tungsten Carbide Tipped Combination Sawblades are designed for a medium finish in softwood, hardwood, exotic timber, plasterboard, & cement bonded board. Compatible with all sawing machines though bushing washers may be required for some models. Features quality carbide tips for high wear resistance. With a reamed bore to ensure precise fit to spindle.

Features: Silverbraze to ensure tip is bonded securely to body Body hardened & tempered to maintain trueness. Laser etched on reverse to European standard EN847-1/2 The Trend name for traceability & a guarantee of quality High grade alloy steel plate body precision ground to maintain flatness Microgranular Tungsten Carbide Tipped to allow cutting of abrasive materials Warranty: 12 months Comes With: 1 X 30-16mm bushing washer 1 X 30-25mm bushing washer

...

Trend CSB/25024 Craft Pro Saw Blade 250mm x 24 Teeth x 30mm This sawblade is intended to be used in a portable or stationary sawing machine. Craft Pro Tungsten Carbide Tipped Universal Rip Sawblades are designed give a coarse finish & are suited to cutting softwood, hardwood, exotic timber & plywood. Less teeth are preferred for ripping across the grain of hard & soft wood & other wood based material. Coarser finish & a faster feed rate. Compatible with all sawing machines though bushing washers may be required for some models. Features quality carbide tips for high wear resistance. With a reamed bore to ensure precise fit to spindle.

Features: Silverbraze to ensure tip is bonded securely to body. Body hardened & tempered to maintain trueness. Laser etched on reverse to European standard EN847-1/2 The Trend name for traceability & a guarantee of quality High grade alloy steel plate body precision ground to maintain flatness Warranty: 12 months Comes With: 1 X 30-16mm bushing washer 1 X 30-20mm bushing washer 1 X 30-25.4mm bushing washer

...

Trend CSB/25060 Craft Pro Saw Blade 250mm x 60 Teeth x 30mm This sawblade is intended to be used in a portable or stationary sawing machine. Craft Pro Tungsten Carbide Tipped Trimming / Crosscut Sawblades are designed for a medium to fine finish in particle board, boards veneered both sides, plywood MDF, chipboard laminated one-sided, veneer & hardboard. With more teeth which is preferred for cutting across the grainof hard & soft wood. Finer finish & a slower feed rate. Features quality carbide tips for high wear resistance. Compatible with all sawing machines though bushing washers may be required for some models. With a reamed bore to ensure precise fit to spindle.

Features: Silverbraze to ensure tip is bonded securely to body Body hardened & tempered to maintain trueness Laser etched on reverse to European standard EN847-1/2 The Trend name for traceability & a guarantee of quality High grade alloy steel plate body precision ground to maintain flatness Warranty: 12 months Comes With: 1 X 30-16mm bushing washer 1 X 30-20mm bushing washer 1 X 30-25.4mm bushing washer

...

Trend CSB/25080 Craft Pro Saw Blade 250mm x 80 Teeth x 30mm This sawblade is intended to be used in a portable or stationary sawing machine. Craft Pro Tungsten Carbide Tipped. Fine Trim / Finishing Sawblades are designed give a extra fine finish & are suited to cutting veneers, plywood, boards veneered on both sides, hardboards, MDF & particle boards with plastic laminate on one side. More teeth are preferred for cutting across the grain of hard & soft wood. Finer finish & a slower feed rate. Compatible with all sawing machines though bushing washers may be required for some models. Features quality carbide tips for high wear resistance. With a reamed bore to ensure precise fit to spindle.

Features: Silverbraze to ensure tip is bonded securely to body Body hardened & tempered to maintain trueness Laser etched on reverse to European standard EN847-1/2 The Trend name for traceability & a guarantee of quality High grade alloy steel plate body precision ground to maintain flatness Warranty: 12 months Comes With: 1 X 30-16mm bushing washer 1 X 30-20mm bushing washer 1 X 30-25.4mm bushing washer

...

Trend CSB/30048 Craft Pro Saw Blade 300mm x 48 Teeth x 30mm This sawblade is intended to be used in a portable or stationary sawing machine. Craft Pro Tungsten Carbide Tipped Combination Sawblades are designed for a medium finish in softwood, hardwood, exotic timber, plasterboard, & cement bonded board. Compatible with all sawing machines though bushing washers may be required for some models. Features quality carbide tips for high wear resistance. With a reamed bore to ensure precise fit to spindle.

Features: Silverbraze to ensure tip is bonded securely to body Body hardened & tempered to maintain trueness. Laser etched on reverse to European standard EN847-1/2 The Trend name for traceability & a guarantee of quality High grade alloy steel plate body precision ground to maintain flatness Microgranular Tungsten Carbide Tipped to allow cutting of abrasive materials Warranty: 12 months D: 11 7/8 inches D: 300 mm Bore: 30 mm Kerf: 2.8 mm Plate thick: 1.8 mm No. of Teeth: 48 Tooth form: ATB Hook: 15 degrees Quick Selector No.:29 Colour Code: Red Type: Combination Weight: 1.164kg Packaged

Size: 340 x 340 x 8mm



...

Trend CSB/AP16548 Craft Pro TCP Saw Blade 165mm x 48 Teeth x 20mm The Trend Craft Pro CSB/AP16548 is designed of professional quality for the Tradesman & Craftsman to cut a variety of materials including wood, MDF, particle board, hardboard & plywood.

Features: Precision ground alloy steel body for flatness Reamed bore to ensure precise fit to spindle Silverbraze to ensure tip is bonded securely to body Body hardened & tempered to maintain trueness Laser etched on reverse to European standard EN847-1/2 The Trend name for traceability & a guarantee of quality High grade alloy steel plate body precision ground to maintain flatness For alloy cutting use a cutting lubricant such as Trendiwax Wear gloves & clamp material securely Tungsten carbide tipped sawblade Quality carbide tips for high wear resistance Body hardened & tempered Compatible with all sawing machines    

...

Trend CSB/AP250100 Craft Pro Saw Blade Aluminium & Plastic 250mm x 100 Teeth x 30mm This sawblade is intended to be used in a portable or stationary sawing machine. Craft Pro Tungsten Carbide Tipped. Aluminium / Plastic / Worktop Sawblades are designed for cutting softwood, hardwood, particle boards, plywood veneered on both sides & particle boards with plastic laminate on one side. More teeth are preferred for cutting across the grain of hard & softwood, aluminium & plastics. Finer finish with a slower feed rate. Compatible with all sawing machines though bushing washers may be required for some models. Features quality carbide tips for high wear resistance. With a reamed bore to ensure precise fit to spindle.

Features: Silverbraze to ensure tip is bonded securely to body Body hardened & tempered to maintain trueness Laser etched on reverse to European standard EN847-1/2 The Trend name for traceability & a guarantee of quality High grade alloy steel plate body precision ground to maintain flatness For alloy cutting use a cutting lubricant such as Trendiwax. Wear gloves & clamp material securely Warranty: 12 months Comes With: 1 X 30-16mm bushing washer 1 X 30-20mm bushing washer 1 X 30-25.4mm bushing washer

...