More From Contributor

£79.00
Ridgid micro CD-100 (36163) Combustible Gas Detector The RIDGID micro CD-100 Combustible Gas Detector provides simple & quick readings to identify the presence of combustible gases. The micro CD-100 is designed to detect Methane, Propane, Butane, Ethanol, Ammonia, Hydrogen & many other combustible gases. (See Chart on back for a complete list.) With adjustable sensitivity, even low-levels of gases can be detected in seconds. The RIDGID micro CD-100 Gas Detector is the tool for ensuring proper gas line installations, checking for maintenance & repair needs or quickly pinpoint combustible gas leaks

Features:
Rugged Ergonomic Design makes it capable of withstanding jobsite rigor Tri-Mode Detection gives the operator the flexibility to be alerted with a visual, audible or vibration alert which can be adjusted for your environment Adjustable Sensitivity Settings provides precise leak locating with the touch of a button 16" Flexible Probe allows location & detection of leak in hard-to-reach & confined spaces Field Replaceable Sensor means more up-time & less time waiting for repairs

...
Archived Product
£82.00
Ridgid micro LM-100 (36158) Laser Distance Meter With all the common functions, this laser rangefinder is lightweight, compact & will measure up to 50m range within 1.5mm accuracy The RIDGID micro LM-100 Laser Distance Meter provides simple, quick & accurate distance readings at the push of a button. Simply push the measurement button to turn on the Ultra-Sharp Class II lasers, point the device at at the spot to be measured to, & push the measurement button. The distance reading will appear on the easy to read LCD display. This rugged, compact, portable instrument enables professional tradesman to quickly determine run distances for bidding, distance of piping run, measuring trouble spots down the line & quickly determine spacing for code compliance

Features:
Ultra Sharp Class II Lasers clearly highlight the point being measured Exceptional Distance Range allows accurate measurements up to 164 feet (50m) Adjustable Units enable you to quickly read in feet, inches or meters on the fly Bright Backlit Display for use in poorly lit areas Quick & Accurate calculations on the spot Displays up to the last three measurements, stores the last 20 measurements Rugged Over Molding means that you can keep a solid grip in the harshest of industrial environments [http://www.youtube.com/watch?v=dj CHAr IZUr 4] Measurement Accuracy:

...
Archived Product
£40.00
Ridgid PC-1375ML (23493) Single Stroke Plastic Pipe & Tubing Multilayer Cutters

Features:
This single stroke

...
Archived Product
£89.95
Ridgid RC-2375 (30088) Plastic Pipe & Tubing Ratchet Cutters

Features:
Rugged precision shears for ratchet

...
Archived Product
£24.00
RST RKM81000 Open Frame Tape Measure 100M/330'

Features:
Fibreglass Blade Measures from zero Blade Guidance

...
Archived Product
£90.00
Rothenberger 1.9776 Brazing / Soldering Kit with Nylon Weave Toolbag Great value Kit from Rothenberger with a Super Fire 2 ...
Archived Product
£10.00
Rothenberger 255030 Standard Spirit Level 12 Inch / 300mm The Rothenberger 255030 Spirit Level is highly accurate with 2 clear vials, horizontal & vertical. The body of the level is made from aluminium for added rigidity with black endcaps & a hanging hole.

Features:
Shock & weather proof Measuring accuracy in normal position 0.029

...
Archived Product
£55.00
Rothenberger 3.0954E Contractors Roofing Torch Set. With the Rothenberger professional torches, far higher temperatures are available to provide shorter working times. Designed to run on Propane or Propane / Butane mix. Stabilizing flame with high volume heat output. Can be used for the large scale burning of weeds or as a heating torch for working on bitumen roofing, defrosting or heating applications.

Features:
Long neck tube
- handy for working standing upright 5 Metre hose give a safe working range Comes with: 600mm neck tube 57mm burner Safety stand 5m propane hose Neck Tube: 600mm Burner: 57mm Propane Hose: 5m Weight: 2.5kg


...
Archived Product
£10.00
Rothenberger 3.5536 Mapp / Pro Gas Cylinder 400G This cylinder has a special mix of gases for high performance soldering work. Shorter worker times are achieved because of the extremely high flame temperatures, guaranteeing maximum burning performance. Easy to use with increased user safety through sandwich valves & an aluminium mono-block cylinder. Flame temperatures up to 2700 ...
Archived Product
£59.00
Rothenberger 3.5644X Turbo Brazing Torch The Original
- The Best
- Super-Fire 2 soldering & brazing torch is the result of many

...
Archived Product

Rothenberger 1.9166 Pipefitters Toolkit In Metal Cantilever Tool Box -
25 Piece With 22 Blades

Rothenberger 1.9166 Pipefitters Toolkit in Metal Cantilever Tool Box - 25 Piece with 22 Blades The Rothenberger 1.9166 is a comprehensive toolkit stacked with specialist pipefitters tools in a strong powder coated cantilever toolbox. Toolkit Contains: 7.3570 6 Piece Screwdriver Set - Slotted 0.6x3.5x75, 0.8x4.0x100, 1x5.5x125, 1.2x6.5x150, Phillips No1x100, No2x125 7.3297 UNI-Spanner Set - Multi purpose spanner for installing and removing screw fitting on radiators ROGRIP F 10 inch / 250mm Plier - 60mm / 2 inch 7.0123X Swedish Pattern Wrench "S" - 1. 1/2 inch 7.0122X Swedish Pattern Wrench "S" - 1 inch 7.0228 Basin Wrench - 10 - 32mm / 3/8 - 1. 1/4 inch 7.0027 Tube Cutter - 6 - 35mm / 1/4 - 1.3/8 inch 2.1832 Screw Hole Punches - with 3 point cutting tip - 32mm 70401 MiniCut Pro Pipe
Cutter - 3 - 16mm / 1/8 - 5/8 inch 35.1040 Tap Extension Key Professional Universal Knife with snap off blade 2 Metre Foldable Ruler 12 x Junior Hacksaw Blades 150mm 1 x Junior Hacksaw Frame with Blade 10 x Hacksaw Blades 305mm 1 x Hacksaw Frame 7.0301 Hex Key Set - 2.5, 3, 4, 5, 6, 8, 10mm 255040 - 40 cm Spirit Level with vertical and horizontal phails 322823 - Fitters Hammer (300 g) 322922 - Lump Masonry Hammer (1250 g) Bolster Chisel - 300 x 27mm Sanitary Cross Wrench 73299 Express Spanner - M10, SW 17-19mm Pencil
RIP - This product is no longer available on our network. It was last seen on 31.03.2015

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
  • Availability: Out Of Stock
  • Supplier: Toolstop
  • SKU: ROT-1-dot-9166
Availability: In Stock
£319.00

Product Description

Rothenberger 1.9166 Pipefitters Toolkit in Metal Cantilever Tool Box
- 25 Piece with 22 Blades The Rothenberger 1.9166 is a comprehensive toolkit stacked with specialist pipefitters tools in a strong powder coated cantilever toolbox. Toolkit Contains: 7.3570 6 Piece Screwdriver Set
- Slotted 0.6x 3.5x 75, 0.8x 4.0x 100, 1x 5.5x 125, 1.2x 6.5x 150, Phillips No 1x 100, No 2x 125 7.3297 UNI-Spanner Set
- Multi purpose spanner for installing & removing screw fitting on radiators ROGRIP F 10 inch / 250mm Plier
- 60mm / 2 inch 7.0123X Swedish Pattern Wrench "S"
- 1. 1/2 inch 7.0122X Swedish Pattern Wrench "S"
- 1 inch 7.0228 Basin Wrench
- 10
- 32mm / 3/8
- 1. 1/4 inch 7.0027 Tube Cutter
- 6
- 35mm / 1/4
- 1.3/8 inch 2.1832 Screw Hole Punches
- with 3 point cutting tip
- 32mm 70401 Mini Cut Pro Pipe Cutter
- 3
- 16mm / 1/8
- 5/8 inch 35.1040 Tap Extension Key Professional Universal Knife with snap off blade 2 Metre Foldable Ruler 12 x Junior Hacksaw Blades 150mm 1 x Junior Hacksaw Frame with Blade 10 x Hacksaw Blades 305mm 1 x Hacksaw Frame 7.0301 Hex Key Set
- 2.5, 3, 4, 5, 6, 8, 10mm 255040
- 40 cm Spirit Level with vertical & horizontal phails 322823
- Fitters Hammer (300 g) 322922
- Lump Masonry Hammer (1250 g) Bolster Chisel
- 300 x 27mm Sanitary Cross Wrench 73299 Express Spanner
- M10, SW 17-19mm Pencil

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Blades - Part of a tool or machine which has a cutting edge
Inch - Equivalent to approximately 2.5cm
Cm - Centimetres, one centimetre is equal to 10 milimetres
screwdriver - A tool for driving screws. May be rotated manually or by electric motor.
tap - A device used to control the release of gas or liquid.
snap off blade - A type of blade which can be snapped once blunt to reveal a new sharp edge.
strong - A descriptive word for an item that has physical strength
Key - A physical or virtual device or code used for opening something
blade - A flat part of a device which usually has a cutting edge
Spirit Level - A device used to indicate how level, horizontal or vertical, a surface is
Hammer - A tool used for providing impact to an object such as a nail
professional - A term used to describe products or people which may be focused on specialist educational training
cutting - The seperation of an object usually using a cutting tool such as a knife
Set - a group of items usually related to one another. Some objects cannot function without the complete set of items.
Powder - a object formed from many tiny pieces.
Metre - 100cm. A unit of length.
Professional - A person that is trained within a profession.
Extension - Something that is made bigger through adding to it, for example a conservatory extension on a house.

Supplier Information

Toolstop
Page Updated: 2020-07-29 10:35:21

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu