More From Contributor

£15.00
PDP DP16125 P5-5in 1 115 x 22.2mm 5* Multi Purpose Turbo Diamond Blade

Features:
In tests the cutting speed

...
Archived Product
£33.00
PDP DP16135 P5-5in 1 230 x 22.2mm 5* Multi Purpose Turbo Diamond Blade The 5-in-1 DP16135 blade is renowned for its extremely fast cutting & ability to cut a wide range of materials from steel sections & Indian stone to reinforced concrete & building materials. The 5-in-1 is the ideal choice for all levels of users & is equally at home on large construction sites as it is on smaller jobs.

Features:
In tests the cutting speed of the P5
- 5-in-1 was 15%
- 20% quicker than any other product tested in this

Specification type The 5-in-1 blade can be used successfully on a huge variety of materials from scaffold poles & cast iron through to engineering bricks, concrete products & general building materials, while still maintaining good life Ideally suited for: Indian sandstone Granite Slate Marble Clay products Engineering bricks Flint concrete Reinforced concrete Concrete Concrete slabs Concrete kerbs Concrete pipes Concrete lintels Concrete beams General purpose concrete Flag stones Concrete paviors York stone Occasional use: Standard facing bricks Hand made bricks Concrete roof tiles Concrete building blocks Breeze blocks Steel Metal Cast iron Scaffold poles Weld mesh Rebar Railings General purpose metal Dimensions: 230 x 2.6 x 10 x 22.2mm (9")





...
Archived Product
£55.00
PDP DP16140 P5-5in 1 300 x 20mm 5* Multi Purpose Turbo Diamond Blade The 5-in-1 DP16140 blade is renowned for its extremely fast cutting & ability to cut a wide range of materials from steel sections & Indian stone to reinforced concrete & building materials. The 5-in-1 is the ideal choice for all levels of users & is equally at home on large construction sites as it is on smaller jobs.

Features:
In tests the cutting speed of the P5
- 5-in-1 was 15%
- 20% quicker than any other product tested in this

Specification type The 5-in-1 blade can be used successfully on a huge variety of materials from scaffold poles & cast iron through to engineering bricks, concrete products & general building materials, while still maintaining good life Typical Materials which can be cut with this blade: Steel Metal Cast iron Scaffold poles Weld mesh Rebar Railings General purpose metal Indian sandstone Granite Clay products Marble Slate Engineering bricks Reinforced Concrete Concrete Concrete slabs Concrete kerbs Concrete pipes Concrete lintels Concrete beams General purpose concrete Flag stones Concrete paviors York stone Standard facing bricks Hand made bricks Concrete roof tiles Concrete building blocks Breeze blocks Diimensions: 300 x 3.2 x 10 x 20mm (12")  





...
Archived Product
£42.00
PDP DP16550 P6-ECC 230 x 22.2mm 6*EVOCUT GP Hard Concrete & Hard Material Diamond Blade The Evocut is a professional grade laser welded blade that is designed to cut very hard reinforced concrete FAST. The arrow design segments, slanted keyhole design & cooling holes all combine to ensure incredibly fast cutting & low vibration. The Evocut blade offers everything you would expect from a pro blade, but overall performance is elevated to a totally new level.

Features:
Laser welded Arrow design segments High diamond concentration Advanced bond technology High grade steel centre Cooling holes Fast cutting Long life Low vibration Typical Applications: Ideally suited: All types of hard aggregated reinforced concrete & nonreinforced concrete, general concrete products, Indian sandstone, granite, class 'a' & 'b' engineering bricks, clay products, York stone, concrete paviors, general facing bricks, handmade bricks, concrete roof tiles, solid dense concrete blocks above 7 Newto Occasional use: Lightweight concrete blocks, green concrete, cement screed. Too much use on these materials could result in rapid wear [https://www.youtube.com/watch?v=9T1H8_d Pm XY] Segment

Height:
15mm



...
Archived Product
£99.00
PDP DP16740 Terrasaur Carbide Blade
- 300 x 2.8 x 20mm (12") The TERRASAUR is a carbide cluster saw blade that tackles certain
...
Archived Product
£14.00
PDP DP19010 P6-ATD 7mm 6* Auto-Cool Diamond Tile Drill The P6
- ATD Auto Cool diamond tile drill is filled with a lubricating resin.
...
Archived Product
£59.00
PDP GT10660 P5-PCD 184 x 30mm 5* Fibrefast Polycrystalline Diamond Blade
- Cement board, composite panels The GT10660 P5-PCD is
...
Archived Product
£79.00
PDP DP16553 P6-ECC 300 x 20mm 6* EVOCUT GP Hard Concrete & Hard Material Diamond Blade The Evocut is a professional grade laser welded blade that is designed to cut very hard reinforced concrete FAST. The arrow design segments, slanted keyhole design & cooling holes all combine to ensure incredibly fast cutting & low vibration. The Evocut blade offers everything you would expect from a pro blade, but overall performance is elevated to a totally new level.

Features:
Laser welded Arrow design segments High diamond concentration Advanced bond technology High grade steel centre Cooling holes Fast cutting Long life Low vibration Typical Applications: Ideally suited: All types of hard aggregated reinforced concrete & nonreinforced concrete, general concrete products, Indian sandstone, granite, class 'a' & 'b' engineering bricks, clay products, York stone, concrete paviors, general facing bricks, handmade bricks, concrete roof tiles, solid dense concrete blocks above 7 Newto Occasional use: Lightweight concrete blocks, green concrete, cement screed. Too much use on these materials could result in rapid wear [https://www.youtube.com/watch?v=9T1H8_d Pm XY] Segment

Height:
15mm Dimension: 300 x 2.8 x 15 x 20mm (12")



...
Archived Product
£229.00
PDP PD162 Wet/ Dry Diamond Core Drill The PD162 is a purpose designed, highly practical, no-nonsense dry diamond core drilling machine. The powerful 1200W motor combined with variable speeds between 500rpm & 2300rpm means it is possible to use dry diamond cores up to 162mm diameter to effectively drill brick & block work
Features: Powerful 1200W Motor 6 speed variable speed thumbwheel with electronic feedback control ensures optimum drilling speed & maximises diamond core performance. Soft start & overload protection 2 speed gearbox with mechanical safety clutch Switchable soft impact Comes with: Side handle 3 Jaw keyed chuck 19/21mm spanner Plastic carry case 1 Year warranty Voltage 240v/50 Hz, 110v/60 Hz Single speed gearbox no load rpm 500
- 2300rpm Maximum dry core diameter 162mm Spindle thread

...
Archived Product
£20.00
Philips GC2984/20 Powerlife Plus Steam Glide Iron 2400W The Philips Powerlife Plus gives great results day in day out. The Steam Glide soleplate for your steam iron. It has great scratch resistance, glides excellently & is easy to clean. Fitted with a Drip-Stop system which lets you iron delicate fabrics at low temperatures without having to worry about stains from water. 2400W of power enable quick heat-up & powerful performance droplets. Continuous steam output of up to 40 g/min gives you the perfect amount of steam to efficiently remove all creases & a steam boost up to 140 g for fast removal of even the most stubborn creases. This steam iron can be operated with normal tap water & the calc clean slider makes it easy to remove any built-up scale from your iron. To maintain the performance of your Philips steam iron, you should use this scale clean function once a month when using normal tap water. This iron features a specially designed extra-large heel rest, which gives extra stability when it is put in a vertical position.

Features:
Steam 40g/min; 140g steam boost Steam Glide soleplate Anti-calc 2400 Watts

...
Archived Product

PDP DP16820 P6-PT 115 X 22.2mm 6* Continuous Rim Porcelain Tile Blade

PDP DP16820 P6-PT 115 x 22.2mm 6* Continuous Rim Porcelain Tile Blade The P6-PT is a professional specification designed to cut effortlessly through porcelain and other hard tiles. It is available from only 1.2mm and provides clean and accurate cutting even through very hard porcelain. Sizes 150mm and up are for fixed tile saws and perform better used wet. Features: Designed to cut effortlessly through the hardest of tiles and natural stones, including porcelain Turbo rim delivers lightning fast performance Applications: Porcelain Hard tiles Ceramic tiles Limestone Slate Marble Dimensions: 115 x 1.2 x 10 x 22.2mm (4
RIP - This product is no longer available on our network. It was last seen on 27.12.2017

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
  • Availability: Out Of Stock
  • Supplier: Toolstop
  • SKU: PDP-DP16820
Availability: In Stock
£12.00

Product Description

PDP DP16820 P6-PT 115 x 22.2mm 6* Continuous Rim Porcelain Tile Blade The P6-PT is a professional

Specification designed to cut effortlessly through porcelain & other hard tiles. It is available from only 1.2mm & provides clean & accurate cutting even through very hard porcelain. Sizes 150mm & up are for fixed tile saws & perform better used wet.

Features:
Designed to cut effortlessly through the hardest of tiles & natural stones, including porcelain Turbo rim delivers lightning fast performance Applications: Porcelain Hard tiles Ceramic tiles Limestone Slate Marble Dimensions: 115 x 1.2 x 10 x 22.2mm (4

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Marble - A type of rock varying in colour. Commonly calcite or dolomite
Porcelain - A ceramic material
Ceramic - A hard material with excellent heat resistance made by heating a crystaline substance such as clay
blade - A flat part of a device which usually has a cutting edge
professional - A term used to describe products or people which may be focused on specialist educational training
cutting - The seperation of an object usually using a cutting tool such as a knife
Natural - not manmade
Specification - A description of a product with the details of its attributes.
Accurate - A measurement of precision when all elements are correct.
Professional - A person that is trained within a profession.
Dimensions - The shapes and angles of something or a situation.
Performance - When someone is presenting a form of entertainment, also how well someone is doing within a role.

Supplier Information

Toolstop
Page Updated: 2020-07-29 10:35:21

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu