NWS 043-49-VDE-210-SB VDE Cable Cutters 210mm (N643518-3K) The NWS 043-49-VDE-210-SB cable cutters are for stripping & cutting copper & aluminium cable. With enhanced cutting geometry for simple cutting & higher operating times.

Features: Ratchet-shaped clamping of the cable ensures crimp-free cutting Precision cutting edge for a smooth & clean cut without any burrs Not suitable for steel wire, aluminium alloys & hard-drawn copper conductors Re-adjustable screw-joint Handles with ergonomically shaped Soft Gripp multi-component safety sleeves according to DIN EN/IEC 60900 Professional design for easy handling under permanent load made from special tool steel, forged, oil-hardened Length: 210mm Length: 8 1/4 inches Cable
- Al + Cu multi-wired conductor single & stranded conductor: 25mm Cable
- Al + Cu multi-wired conductor single & stranded conductor: 70mm Weight: 0.325kg



...

NWS N609538 Electricians VDE 5-In-1 Combi Max Pliers 180mm (N1093-49-VDE-180C) High Leverage Combination Pliers Combi Max+ VDE. American pattern. For holding, gripping, bending & cutting work. Suited to cutting hard & soft wires. Asymmetric inside jaws for better grip on the workpiece.

Features: For shortening screws M 3.5 Cutting edges inductively hardened Gripping zones for flat & round materials With Nail- & wire holder Integrated ring spanner Power transmission with optimum leverage for easy & effortless work Handles with ergonomically shaped Soft Gripp multi-component safety sleeves according to DIN EN/IEC 60900 made from tool steel, forged, oil-hardened Length: 180mm

Width: 65mm

Height: 20mm Soft wire
- 220 N/mm






...

NWS 1343-49-VDE-160-SB VDE 2-in-1 Side Cutters 160mm (N634547) To enable strain-free, concentrated working over longer periods of time, the handles of these side Cutters are non-slip & safe thanks to the Soft Gripp sleeves, on the one h&, & fit snugly in the hand due to the ergonomically designed soft zones, on the other. The pliers are drop-forged tool steel & are oil hardened. The cutting edges of this cutting tool is induction-hardened to ensure it is able to cope with the needs of professionals in industry & the trades.

Features: For cutting hard & soft wires For shortening screws M 3.5 Precision cutting edge for the finest wires Cutting edges inductively hardened Cutting edge hardness approx 62 HRC Power transmission with optimum leverage for easy & effortless work Handles with ergonomically shaped Soft Gripp multi-component safety sleeves according to DIN EN/IEC 60900 made from special tool steel, forged, oil-hardened   Length: 160mm Soft wire
- 220 N/mm


...

NWS 1651-12-240 Waterpump Pliers Classic Plus 240mm The 1651-12-240 water pump pliers are indestructible with safety box joint for highest stress & double-toothed jaws. Cogs in addition induction hardened. Optimum jaw geometry with self-locking serration.

Features: Gripping capacity 40% above ISO by means of arch-shaped pitch adjustment Ideal fulcrum, minimum effort Finger trap protection for safe work, prevents injuries caused by squeezing Box joint with wide guide surfaces Handles coated with plastic made from chrome vanadium steel, forged, oil-hardened   Length: 240mm Length: 9 1/2 unches Maximum span: 50mm DIN standards
- National, European & worldwide: DIN ISO 8976 Weight: 0.34kg


...

NWS N109-69-180C High Leverage Combination Pliers Combi Max 180mm NWS is one of Europe's fastest growing manufacturers of quality pliers. This specialist company combines a wealth of traditional expertise with bang up to date production technology. On-going investment in skills & innovation ensures NWS continues to focus on quality, design & high end function pliers & snips.

Features: American pattern For cutting hard & soft wires Cutting edges inductively hardened Asymmetric inside jaws for better grip on the workpiece Gripping zones for flat & round materials With Nail- & wire holder Integrated ring spanner Power transmission with optimum leverage for easy & effortless work Handles with ergonomically shaped Soft Gripp multi-component sleeves made from tool steel, forged, oil-hardened Length: 180mm Length: 7 inches Soft wire
- 220 N/mm


...

NWS N131121 Heavy Duty End Cutting Nipper Power Bolt 200mm (N1311-12-200C) These end cutting nippers are drop-forged from tool steel & in addition oil hardened, they have induction-hardened cutters that allow you to cut both hard & soft wires with ease. The cutters are also suitable for use as steel fixer's pincers & for tying wire mesh.

Features: Specifically geared towards the requirements in the building & manufacturing industry Asymmetrical cutting edge for easily cutting long workpieces, too Precision cutting edge for bolts, nails, rivets, hard wires & similar materials Cutting edges inductively hardened Tremendous cutting performance, up to 50 % power saving compared with conventional end cutting pliers Power transmission with optimum leverage for easy & effortless work Handles coated with plastic made from special tool steel, forged, oil-hardened Length: 200mm Soft wire
- 220 N/mm


...

NWS N134-49-VDE-160-SB VDE Side Cutters 160mm (N634523) The N134-49-VDE-160-SB are Electrician's Side Cutters for cutting hard & soft wires. Cutting edge hardness approx. 62 HRC, Cutting edges inductively hardened, Precision cutting edge for the finest wires. The pliers in the 49 VDE series are subjected to regular inspections by VDE, the Association for Electrical, Electronic & Information Technologies, to ensure the very high standards of safety that are required when working on "live" electrical components. To enable strain-free, concentrated working over longer periods of time, the handles are non-slip & safe thanks to the Soft Gripp sleeves & fit snugly in the hand due to the ergonomically designed soft zones. The pliers are drop-forged tool steel & are oil hardened. The cutting edges of all these cutting tools are induction-hardened to ensure they are able to cope with the needs of professionals in industry & the trades.

Features: Power transmission with optimum Ergonomically shaped handles with Soft Gripp multi-component safety sleeves according to DIN EN/IEC 60900 made from special tool steel, forged, oil-hardened   Length: 160mm Weight: 0.2kg

...

NWS N1351-49-VDE-190 6-in-1 Supercutter VDE
- 190mm Electricians VDE 6-in-1 Supercutter. Soft-grip handles with slip guards for
...

NWS N1351-49-VDE-190C 6 in 1 Supercutter Pliers NWS is one of Europe's fastest growing manufacturers of quality pliers. This specialist company combines a wealth of traditional expertise with bang up to date production technology. On-going investment in skills & innovation ensures NWS continues to focus on quality, design & high end function pliers & snips.

Features: Pliers for electrical installation 4 Functions: cutting
- stripping
- crimping
- bending With stripping function for single & multi-stranded conductors with 1.5 mm




...

NWS N1406-69-200C Electricians Pliers ERGO MULTI NWS is one of Europe's fastest growing manufacturers of quality pliers. This specialist company combines a wealth of traditional expertise with bang up to date production technology. On-going investment in skills & innovation ensures NWS continues to focus on High-End-Function Quality & Design pliers & snips.

Features: Optimum power transmission because of enhanced leverage Cutting edges in addition induction hardened For hard andsoft wires Useful as Spanner Grip zone for flats & rounds With lock & Opening spring Ergonomic angled Head Strain-free working Tool steel, drop-forged, oil-hardened   Length in millimeter: 200 Length in inches: 8 Soft wire 220 N/mm

...