Metabo KHA18LTX SDS+ Hammer + 18V Li HD 3.5 Ah & 18V Li HD 5.5 Ah Batteries & ASC30-36 Charger This e Xclusive Toolstop deal consists of the KHA18LTX SDS+ Hammer Drill with Vario (V)-electronics for working with customised speeds for the materials used. Also comes with the Metabo 18V Li HD 3.5 Ah & 5.5 Ah batteries & ASC30-36 fast charger. KHA18LTX

Features: Hammer stop for drilling in rotary only mode & for screwdriving Rotation stop for chiselling Vario (V)-electronics for working with customised speeds for the materials used Clockwise & anti-clockwise rotation Metabo S-automatic torque limiting clutch: mechanical decoupling of the drive if the drill jams for safe working Comes with: Depth Stop, side handle, carry strap, metaloc carry case LIHD Battery

Features: Li HD battery packs for ultimate performance & extremely long application with minimal temperature generation Ultra M technology: Intelligent battery management for long-lasting battery packs with a 3 year guarantee Patented "AIR COOLED" charging technology Permanent Electronic Single Cell Protection (ESCP) when charging, for particularly long life Processor-controlled charge & discharge management Capacity display with almost no self-discharge No memory effect Capacity display with almost no self-discharge ASC 30-36V

Features: Charging voltage
- 2.5A " Air Cooled" charging technology Very low st&-by input power New charging management system Charge time Approx. 30 minutes at 1.3 Ah KHA18LTX Spec: No load speed: 0
- 1, 100 rpm Max impact rate: 4, 000 bpm Single blow energy: 2.2J Drilling capacity in: Concrete 24mm, Steel 13mm, Wood 25mm Optimal drilling capacity in concrete 6-14mm Impact power: 164 J/s Max. vibrations hammer drilling: 13 m/s 2 Weight: 4kg LIHD Battery Spec: Voltage: 18V Capacity: 3.5 Ah & 5.5 Ah ASC 30-36V Spec: Mains voltage: 240 V Mains frequency: 50
- 60 Hz








...

Metabo KHA 18LTX Hammer 18V Cordless Lithium-ion 3 Function SDS+ (Body Only) with Metaloc Carry Case The KHA18 LTX SDS hammer is the first 18 Volt 3 function SDS+ hammer from Metabo. With excellent drilling speed & a blow force of 2.2 Joules this machine is optimized for drilling 6
- 14 mm holes into concrete but can comfortably cope up 24 mm. Lightweight, robust construction & compact shape make for comfortable working even overhead. Other features include, S-automatic safety clutch for machine & operator safety, variable speed electronics, LED working light & shoulder strap.

Features: Hammer stop for drilling in rotary only mode & for screwdriving Rotation stop for chiselling Vario (V)-electronics for working with customised speeds for the materials used Clockwise & anti-clockwise rotation Metabo S-automatic torque limiting clutch: mechanical decoupling of the drive if the drill jams for safe working Comes With: KHA18 LTX SDS hammer (Body Only) Depth Stop Side Handle Carry Strap Metaloc carry case Please note batteries & charger are NOT included


...

Metabo KHA36-18LTX32 Cordless 36V SDS+ Combination Hammer (4 x 18V 6.2 Ah Batteries) The Metabo KHA36-18LTX32 600796660 package consists of the SDS+ Combination Hammer Drill with 3 functions: hammer drilling, drilling & chiselling. Powered by 2 x 18V batteries giving the equivalent power of a 36 volt machine. Also included are 4 x 18V 6.2 Ah Li HD Batteries, 2 x ASC Ultra Multi Voltage Chargers, 2 x Chucks, Side Handle, Depth Stop & 2 x Metaloc Cases.

Features: 100% compatibility with the 18 Volt class: powerful 36 Volt operation with two 18 Volt battery packs from Metabo Metabo Vibra Tech (MVT): working, also continuously, in a low-fatigue manner whilst protecting the user's health Ergonomic housing shape for chiselling tasks without side handle Metabo Quick: fast, tool-free chuck for working with SDS-plus & cylindical drill bits Variospeed (V) Electronics for working at customised speeds to suit various application materials Metabo S-automatic safety clutch: mechanical decoupling of the drive for safe working should the drill stop unexpectedly Battery packs with capacity display for checking the charge status Comes With: 4 x 18V 6.2 Ah Li HD Batteries 2 x ASC Ultra Multi Voltage Chargers 2 x Chucks Side Handle Depth Stop 2 x Metaloc Cases   Type of battery pack: Li HD Battery pack voltage: 18 V Capacity of battery pack: 6.2 Ah Max. single blow energy (EPTA): 3.1 J Maximum impact rate: 4500 bpm Drill-

...

Metabo KHA 36 LTX Cordless Power Extreme 3 Function SDS Hammer comes complete with 2 Batteries, charger, kitbox & 3-jaw chuck The Metabo KHA 36 LTX SDS+ is the latest generation cordless hammer from Metabo offering a compact L-Shape design, low weight & perfect balance. Featuring the Metabo trademark aluminium gear housing, Mechanical safety clutch & MVT (Metabo Vibra Tech) rear handle with large trigger. This machine delivers the best weight performance ratio in its class.

Features: Metabo trademark aluminium gear housing Mechanical safety clutch & MVT (Metabo Vibra Tech) rear handle with large trigger delivers the best weight performance ratio in its class 3 function gearbox: SDS, chisel & rotary only. Metabo S
- Automatic Safety Clutch, for machine & operator safety Comes with: 2 x 36v 2.6 Ah li Power Extreme batteries ASC30-36 battery charger 3 Jaw chuck Carry case Please Note
- some of the photos show the same machine with 4 Ah batteries in place of the 2.6 Ah batteries Variable speed (V) electronics for infinitely variable speed change Speed at no load: 0
- 1.100 /min. Impact rate of 4, 500 bpm with 3.1 J blow force Capacity in concrete 32 mm, steel 13 mm, wood 30 mm Weight: 4.5kg




...

Metabo KHA 36 LTX Cordless Power Extreme 3 Function SDS Hammer comes complete with 2 x 36 Volt 2.6 Ah li Power Extreme Batteries, ASC30-36 Battery Charger, Kitbox & 3-Jaw Chuck The Metabo KHA 36 LTX SDS+ is the latest generation cordless hammer from Metabo offering a compact L-Shape design, low weight & perfect balance. Featuring the Metabo trademark aluminium gear housing, Mechanical safety clutch & MVT (Metabo Vibra Tech) rear handle with large trigger. This machine delivers the best weight performance ratio in its class.

Features: Hammer stop for drilling in rotary only mode & for screwdriving Ergonomic housing shape for chiselling tasks without side handle. Rotation stop for chiselling Metabo " Quick": Quick change between SDS Plus hammer chuck & quick-action keyless chuck for drilling in wood & metal Vario (V)-electronics for working with customised speeds for the materials used Clockwise & anti-clockwise rotation Metabo S-automatic torque limiting clutch: mechanical decoupling of the drive if the drill jams for safe working Metabo Vibra Tech (MVT) side handle for vibration damping to protect the user's health Battery packs with capacity display for checking the charge status 3-year battery pack warranty by means of Ultra-M technology Comes with: 2 x 36v 2.6 Ah li Power Extreme batteries ASC30-36 battery charger 3 Jaw chuck Carry case Please Note
- some of the photos & video show the same machine with 4 Ah batteries in place of the 2.6 Ah batteries [https://www.youtube.com/watch?v=_f Souz Li Aw I0 Type of battery pack Li-ion Battery pack voltage 36 V Capacity of battery pack 2.6 Ah Drill diameter in: Concrete: 32 mm Steel: 13 mm Soft wood: 30 mm Idle revolution: 0
- 1.100 /min Maximum impact rate: 4.500 /min Max. single blow energy: (EPTA) 3, 1 J Impact power: 226 J/s Bit retainer: SDS-plus Weight (including battery pack): 4.9kg



...

Metabo KHE 76 SDS MAX Combination Hammer

Features: Metabo Vibra Tech (MVT) vibration absorber: a spring-mounted

...

Metabo KHE2444 SDS Plus Combination Hammer Drill

Features: Hammer stop for drilling in rotary only mode Rotation

...

Metabo KHE2644 SDS Plus Combination Hammer Drill The lightweight KHE2644 has an incredibly fast hammer action of 5, 400bpm. It is happiest drilling holes in concrete from 5 to 16 mm in diameter, but this high performer can raise its game with holes up to 26 mm in diameter. Comes fitted with a 4 metre power cable.

Features: High performance hammer action, precisely mounted in a housing made from aluminium alloy: long-lasting & robust Hammer stop for drilling in rotary only mode Rotation stop for chiselling Clockwise & anti-clockwise rotation Electronic soft start for precise spot-drilling Stoppable switch for trouble-free chiselling in continuous operation Vario (V)-electronics for working with customised speeds for the materials used Metabo S-automatic torque limiting clutch: mechanical decoupling of the drive if the drill jams for safe working Comes with: Hammer chuck for tools with SDS-plus shank end Side handle Drilling depth guide Plastic carry case Torque: 15 Nm Drill diameter in:
- Concrete with hammer drills: 26 mm
- Masonry with core bits: 68 mm
- Steel: 13 mm
- Soft wood: 30 mm Idle revolution: 0
- 1, 150 /min Rated input power: 800 W Output power: 410 W Revolutions at rated load: 960 /min Maximum impact rate: 5, 400 /min Max. single blow energy: (EPTA) 2.3 J Impact power: 166 J/s Collar diameter: 43 mm Bit retainer: SDS-plus Cable length: 4 m Weight: (without power cable) 2.9kg






...

Metabo KHE2644 SDS Plus Combination Hammer Drill The lightweight KHE2644 has an incredibly fast hammer action of 5, 400bpm. It is happiest drilling holes in concrete from 5 to 16 mm in diameter, but this high performer can raise its game with holes up to 26 mm in diameter. Comes fitted with a 4 metre power cable.

Features: High performance hammer action, precisely mounted in a housing made from aluminium alloy: long-lasting & robust Hammer stop for drilling in rotary only mode Rotation stop for chiselling Clockwise & anti-clockwise rotation Electronic soft start for precise spot-drilling Stoppable switch for trouble-free chiselling in continuous operation Vario (V)-electronics for working with customised speeds for the materials used Metabo S-automatic torque limiting clutch: mechanical decoupling of the drive if the drill jams for safe working Comes with: Hammer chuck for tools with SDS-plus shank end Side handle Drilling depth guide Plastic carry case Torque: 15 Nm Drill diameter in:
- Concrete with hammer drills: 26 mm
- Masonry with core bits: 68 mm
- Steel: 13 mm
- Soft wood: 30 mm Idle revolution: 0
- 1, 150 /min Rated input power: 800 W Output power: 410 W Revolutions at rated load: 960 /min Maximum impact rate: 5, 400 /min Max. single blow energy: (EPTA) 2.3 J Impact power: 166 J/s Collar diameter: 43 mm Bit retainer: SDS-plus Cable length: 4 m Weight: (without power cable) 2.9kg






...

Metabo KHE2644 SDS Plus Combination Hammer Drill The lightweight KHE2644 has an incredibly fast hammer action of 5, 400bpm. It is happiest drilling holes in concrete from 5 to 16 mm in diameter, but this high performer can raise its game with holes up to 26 mm in diameter. Comes fitted with a 4 metre power cable.

Features: High performance hammer action, precisely mounted in a housing made from aluminium alloy: long-lasting & robust Hammer stop for drilling in rotary only mode Rotation stop for chiselling Clockwise & anti-clockwise rotation Electronic soft start for precise spot-drilling Stoppable switch for trouble-free chiselling in continuous operation Vario (V)-electronics for working with customised speeds for the materials used Metabo S-automatic torque limiting clutch: mechanical decoupling of the drive if the drill jams for safe working Comes with: Hammer chuck for tools with SDS-plus shank end Side handle Drilling depth guide Plastic carry case Torque: 15 Nm Drill diameter in:
- Concrete with hammer drills: 26 mm
- Masonry with core bits: 68 mm
- Steel: 13 mm
- Soft wood: 30 mm Idle revolution: 0
- 1, 150 /min Rated input power: 800 W Output power: 410 W Revolutions at rated load: 960 /min Maximum impact rate: 5, 400 /min Max. single blow energy: (EPTA) 2.3 J Impact power: 166 J/s Collar diameter: 43 mm Bit retainer: SDS-plus Cable length: 4 m Weight: (without power cable) 2.9kg






...