Marshalltown PF14D Permaflex Trowel with Durasoft Handle 14 Inch (27939) The Marshalltown PF14D Permaflex Trowel has a 14 Inch blade with soft grip handle. The company have been the standard of quality since 1890 in Iowa USA. Focusing on quality & innovation for over 120 years. This tool is the end product of that knowledge.

Features: Flexible blade bonded to a stiff backing plate Allows for easier application of finish coat, drywall compound & EIFS Blade made from the highest grade stainless steel with round corners Aluminum Xtralite mounting is lightweight but very strong Backing blade thru-riveted to mounting for superior hold strength & flatness Dura Soft handle

...

Marshalltown PF16D Permaflex Trowel with Durasoft Handle 16 Inch (27940) The Marshalltown PF16D Permaflex Trowel has a 16 Inch blade with soft grip handle. The company have been the standard of quality since 1890 in Iowa USA. Focusing on quality & innovation for over 120 years. This tool is the end product of that knowledge.

Features: Flexible blade bonded to a stiff backing plate Allows for easier application of finish coat, drywall compound & EIFS Blade made from the highest grade stainless steel with round corners Aluminum Xtralite mounting is lightweight but very strong Backing blade thru-riveted to mounting for superior hold strength & flatness Dura Soft handle

...

Martindale CT60 Clamp Adapter complete with flying lead terminated with 4mm plugs.

Features: A general purpose

...

Martindale FD500 Standard Fuse Finder complete with Receiver Unit & Transmitter Unit The analogue Martindale Fuse Finder Kit FD500 finds which fuse or breaker controls a circuit

Features: Enables tracing from socket to socket on a circuit The transmitter (FD500/T) takes its power from the mains & emits a signal which the adjustable sensitivity receiver (FD500/R) can pick up This combination can easily distinguish the appropriate circuit, even on a crowded fuse board Sensitive analogue adjustment by thumb wheel finds the right breaker rapidly EMC compliant Designed for use at mains sockets only Comes with: Receiver unit Transmitter unit Receiver: Mains supply: 240V, 30-70 Hz Transmit signal: approx 5 Hz, 20A (max) pulse of 1.7us width Temperature range: -10 degrees
- 40 degrees at max 60% RH Earth leakage: Nil Power consumption: Approx 1W Overvoltage: CAT III/300V Protection class: IP20 Dimensions: 65 x 65 x 46mm approx Weight: 60g Transmitter: Tracing

Depth: 0
- 10cm for fuse assignment (depending on local conditions) Sensitivity control: Rotary thumbwheel on the housing Temperature range: -10 degrees to 40 degrees at max 60% RH Protection class: IP20 Supply: 9V battery, MN1604/PP3, IEC 6LA61 (alkaline only)
- not supplied Dimensions: 160 x 55 x 30mm Weight: 135g approx EMC compliant ** For Further Technical

Specification Please Refer To Attachments Below**








...

Martindale LP2000 Loop Impedance Meter

Features: The model LP2000 Digital Loop Tester is a h&-held, mains

...

Martindale PD440 440V Proving Device The Martindale PD440 is a 440V AC proving device, designed to enable voltage indicators to be fully checked, in compliance with Health & Safety recommendations

Features: A 440V AC proving device Designed to enable voltage indicators to be fully checked, in compliance with Health & Safety recommendations Compatible with the Martindale VI13700G & the new Martindale VI13700/2 Can also be used to check Drummond & other filament test lamps as well as standard multimeters & other manufacturers two pole voltage indicators NB
- Using a voltage indicator without first proving it is working correctly could prove fatal


...

Martindale PD690 Proving Unit Nothing is more dangerous than trusting a defective voltage indicator. The proving unit produces 690V AC/DC to enable voltage indicators to be fully checked. This unit is designed for indicators with 230V & 415/440V AC or DC detection ranges, such as the Martindale VI13700G. The proving unit is one of the few designs to check indicators with ranges above 250V. The PD690 can also check Drummond & other filament test lamps as its output is sufficient to illuminate the bulb. Not designed for use with multimeters. ...

Martindale RC2000 RCD Tester complete with Carrying Case, Mains Test Lead & User Manual The Martindale RC2000 RCD Tester is ideal for testing common RCDs up to 500m A. RCD rating is selected via the rotary dial, & three different test modes are available
- Full, Half & Fast Test, at either 0
...

Martindale VIPDLOK Voltage Indicator, Proving Device & Lock Out Kit The complete solution for safe isolation, the Martindale VIPD Lock Out Kit contains the VI13700/2 voltage indicator, PD440 proving device, along with a complete lock out kit

Features: The complete solution for safe isolation Contains the VI13700/2 voltage indicator, PD440 proving device, along with a complete lock out kit Nothing is more dangerous than trusting a defective voltage indicator to test for a dead circuit
- Safe electrical work requires the use of a voltage indicator that has been proved with a proving unit before & after use Kit enables you to comply with health & safety recommendations for safe working The 16 piece kit contains the following items: 1 x PD440 proving device 1 x VI13770 voltage indicator 1 x Padlock with unique key 1 x Steel safety hasp, with space for up to 6 padlocks 1 x Green mini MCB lock 1 x Yellow mini MCB lock 1 x Blue medium MCB lock 1 x Large red MCB lock 1 x Red fuse lockout breaker 5 x Danger tags which can be overwritten 1 x Black marker for writing on Danger tags 1 x TC55 soft carry case ELECTRICAL SPECIFICATIONS: Nominal voltage range: 50
- 600V DC/AC rms Nominal voltage threshold indications: 50, 100, 200, 400 V DC/AC rms Nominal Voltage threshold tolerance: < 85% of marked threshold indication Polarity indication: from approx 12V DC/AC rms AC/DC voltage detection: automatic Range detection: automatic Response time: < 0.1s Frequency range: DC, 1
- 400 Hz Test current: < 3.5m A at 600V DC/AC rms Duty ratio: 30s ON (operated) / 240s OFF (recovery) GENERAL SPECIFICATIONS: Operating: -10




...

Mc Culloch GBV345 Multi-Function Blower / Vacuum Petrol 2 Stroke 25cc The Mc Culloch GBV345 is an efficient handy one-hand blower with 3 in 1 function. Blower, vacuum & mulcher, ideal for work such as clearing grass cuttings, leaves & litter. The powerful machine has a blower speed of 345 km/h / 214.37 mph & a mulch ratio of 16:1. Equipped with a tube attachment for easy handling. Features quick starting with fuel pump & intuitive controls, effective anti-vibrated handle with soft grip for better comfort & cruise control for adjustable settings.

Includes:: flare nozzle for higher blowing efficiency.

Features: Soft Start
- makes it easier to start. Reduces the resistance in the starter cord by up to 40% Flared nozzle
- for concentrated & increased blowing power Cruise control
- the fan speed can be set for easier handling Easy to attach tube
- for quick assembly & simple storage Engine specification: Cylinder displacement: 25 cm







...