Makita SP6000J1 Plunge Cut Saw 165mm with Makpac Case, 2 Guide Rails & Connector, Hex Wrench & Carbide-Tipped Saw Blade Professional circular saw with plunge cutting facility which can perform an impressive 56mm depth of cut. With a contoured comfort grip. Can be used in conjunction with its guide rails & connector (both supplied) to acheive perfectly straight cuts with no need to use additional & awkward straight edges with clamps. This saw is very easy to use. With a Tip-Resistant design & a Depth Stopper for splinter-free cutting. Also boasts Variable Speed Trigger, Constant Speed Under Load, Electronic Brake, Soft Start & is Double Insulated for safety.

Features: Close to wall cutting
- Can perform a cut only 18mm away from the wall Non-Slip Rubberised Handles
- contoured comfort grips handle reduce user fatigue during prolonged use. Depth Stopper for splinter free cutting
- enables a preliminary cut at a depth of 2mm Tip Resistant Design
- sliding the lever prevents this tool from falling down towards blade case Connectable to a vacuum
- keep workplace free from airborne dust particles. Sawdust ejection backwards for comfortable operation. Easy Blade Replacement Design
- Lever locks blade in replacement position, hex wrench can be used through hole in casing & is stored afterwards in the handle. Comes with: 1943685 x 2 guide rails P-45777 Connector Carbide tipped blade Hex wrench Makpac carry case







...

Makita SP6000J1 Plunge Cut Saw 165mm with Makpac Case, 2 Guide Rails & Connector, Hex Wrench & Carbide-Tipped Saw Blade Professional circular saw with plunge cutting facility which can perform an impressive 56mm depth of cut. With a contoured comfort grip. Can be used in conjunction with its guide rails & connector (both supplied) to acheive perfectly straight cuts with no need to use additional & awkward straight edges with clamps. This saw is very easy to use. With a Tip-Resistant design & a Depth Stopper for splinter-free cutting. Also boasts Variable Speed Trigger, Constant Speed Under Load, Electronic Brake, Soft Start & is Double Insulated for safety.

Features: Close to wall cutting
- Can perform a cut only 18mm away from the wall Non-Slip Rubberised Handles
- contoured comfort grips handle reduce user fatigue during prolonged use. Depth Stopper for splinter free cutting
- enables a preliminary cut at a depth of 2mm Tip Resistant Design
- sliding the lever prevents this tool from falling down towards blade case Connectable to a vacuum
- keep workplace free from airborne dust particles. Sawdust ejection backwards for comfortable operation. Easy Blade Replacement Design
- Lever locks blade in replacement position, hex wrench can be used through hole in casing & is stored afterwards in the handle. Comes with: 1943685 x 2 guide rails P-45777 Connector Carbide tipped blade Hex wrench Makpac carry case







...

Makita TD0101F Impact Driver complete with Phillips bit The Makita TD0101F is a cost-competitive 100 Nm-class impact driver developed as an entry level machine. It features compact design with an overall length of 184mm (7-1/4"), & lightweight at only 1.1kg The lightweight tool which is compact in design providing increased operator comfort & safety.

Features: Weighs only 1.1kg Phosphorescent bumper Forward/reverse rotation Variable speed trigger Electronic brake Double insulation Comes with: Phillips bit Drive:

...

Makita TD0101F Impact Driver complete with Phillips bit The Makita TD0101F is a cost-competitive 100 Nm-class impact driver developed as an entry level machine. It features compact design with an overall length of 184mm (7-1/4"), & lightweight at only 1.1kg The lightweight tool which is compact in design providing increased operator comfort & safety.

Features: Weighs only 1.1kg Phosphorescent bumper Forward/reverse rotation Variable speed trigger Electronic brake Double insulation Comes with: Phillips bit Drive:

...

Makita TD090DWE 10.8V Impact Driver complete with batteries, charger, screwdriver bit & carrying case. Light-weight & Compact Impact Driver with built in job light for superior handling with minimised operator fatigue.

Features: New 10.8V Li-ion battery of stick type as a power unit Lightweight Compact Built in job light for superior handling with minimised operator fatigue Comes with: Battery Charger 2 x 1.3 Ah Li-ion Batteries Carry case Screwdriver bit

Dimensions (Lx Wx H): 155mm x 54mm x 178mm Max Output: 110W Max fastening torque: 90N.m No Load Speed: 0
- 2, 400rpm Net Weight: 0.9kg (2.0lbs) Impacts per min: 0
- 3, 000ipm Machine screw: M4
- M8 (5/32"
- 5/16") Standard bolt: M5
- M12 (3/16"
- 15/32") High tensile bolt: M5
- M10 (3/16"
- 15/32") Coarse thread: 22
- 90mm (7/8"
- 3-1/2") Charging time: 50 min Voltage: 10.8 volts (1.3 Ah) Battery: Lithium-Ion













...

Makita TD110DZ Impact Driver 10.8V CXT Cordless Li-ion (Body Only) Model TD110D is one of the first new 10.8V platform models. Succeeding the TD090D but now with slide on Compact e Xtreme Technology Batteries (not included). Coming from solid tried & tested heritage the TD110D is the enhanced model, it is so compact & easy to use. The rubberised handle has been designed for best grip & maximum thrust to the bit. A single LED joblight has pre-glow & after-glow functions handy for working in dark conditions.

Features: Electric brake Variable speed control trigger Equipped with Battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current Forward & reverse trigger LED job light Ergonomic soft grip CXT Battery Features (not included): Higher battery capacity Individual cell monitoring Battery protection circuit Low temperature performance up to -20

...

Makita TD111DZ Impact Driver 10.8V Cordless CXT with Makpac Connector Case Type 1 (Body Only) Model TD111D is a Cordless Impact Driver powered by 10.8V slide Li-ion battery & developed from the current model TD110D. With almost toy like

Dimensions of 130mm x 180mm x 50mm the TD111D is at home in tight spaces. It may be small but delivers 135 Nm of torque from a powerful brushless motor. Sold without battery or charger in Makpac Type 1 Carry Case. Runs on CXT 10.8V batteries.

Features: New impact mode (A-mode): helps to eliminate "screw cam-out" & "cross threading" by driving at low speed until the start of tightening Variable speed Electric brake Forward/reverse rotation LED job light Compact design with overall length of 135mm Brushless motor Ergonomic soft grip Two selectable Impact Modes (High/ Low) Belt clip Comes With: Makpac connector case type 1 8383129 Makpac inlay Double ended bit Belt clip Voltage: 10.8 v Drive shank Hex: 1/4 " Standard Bolt: M5-M14 High Tensile Bolt: M5-M12 Coarse thread (length): 22
- 90 mm Max Torque: 135 Nm Battery Type: Lithium-ion Vibration: Fastening Bolt: 12.5 m/sec




...

Makita Thermal Lunch Bag in Battery Shape

Features: Ergonomic rubber carry handle makes lifting more comfortable

...

Makita TM3000C 320 Watt Oscillating Multi-cutter This is a really versatile tool which benefits from having literally hundreds of attachments to choose from because of the OIS accessory system it uses. A real compact & diverse tool. With an oscillating rate of up 20, 000 revs per minute the TM3000 will glide through even the toughest cutting jobs with ease. The soft start facility means that you can place the blade accurately on the workpiece & avoids the blade skipping around for a more precise cut. The blade can be attached in a variety of angles in 30 deg increments for a full 360 degrees of optimum manoeuvrability. With the wide variety of accessories available (not supplied) you have the ability to s&, flush cut or deep cut woods, metal, nails & plastic, window putty, rubber, cut tiles & rout grouted joints between tiles, the possibilities are truly endless.

Features: Thumb On/ Off switch, positioned for ease of use when holding body of machine Hex wrench holder on body Variable speed control dial Accessories can be installed at 30

...

Makita TM3000C 320 Watt Oscillating Multi-cutter This is a really versatile tool which benefits from having literally hundreds of attachments to choose from because of the OIS accessory system it uses. A real compact & diverse tool. With an oscillating rate of up 20, 000 revs per minute the TM3000 will glide through even the toughest cutting jobs with ease. The soft start facility means that you can place the blade accurately on the workpiece & avoids the blade skipping around for a more precise cut. The blade can be attached in a variety of angles in 30 deg increments for a full 360 degrees of optimum manoeuvrability. With the wide variety of accessories available (not supplied) you have the ability to s&, flush cut or deep cut woods, metal, nails & plastic, window putty, rubber, cut tiles & rout grouted joints between tiles, the possibilities are truly endless.

Features: Thumb On/ Off switch, positioned for ease of use when holding body of machine Hex wrench holder on body Variable speed control dial Accessories can be installed at 30° increments, across 360° Uses OIS interface Comes with: Hex wrench

...