Makita EH6000W 2-Stroke Petrol 22.2cc Hedge Trimmer 60cm complete with blade cover The Makita EH6000W is a double-sided blade petrol hedge trimmer equipped with the 22.2cc 2-stroke engine. It has an extra light design with improvements in noise, vibration & handling for environment & human friendliness.

Features: Forward exhaust direction Environmentally friendly 2-stroke engine developed in compliance with: CARB tier 3, EPA phase 2, EU stage 2 safety regulations of the EC directives Stain-free shear blade surface of glittering silver obtained by non-electrolyzed nickel plating that features high anti-abrasion surface for long lasting coating 5-Position rotating rear handle can be locked at 0 degree & 45/90 degrees left & right for vertical or angled trimming Forward exhaust direction for operator's health & comfort Specially designed engine
- has a low centre of gravity that provides better balance to the machine Equipped with floating structure of engine section & handle section for anti-vibration
- four damper springs absorb vibration from engine to integrated front & rear handles Comes with: Blade cover Socket wrench Hex wrench Blade Length: 600mm Engine capacity: 22.2cc Horsepower: 1hp (DIN) Strokes per minute: 4390spm Capacity: 400ml Engine: 2-Stroke Blade type: Double Sided Cutting diameter: 21.5mm Power rating: 0.68k W No load speed: 10500rpm Fuel mix: 50: 1 Net weight: 5.0kg



...

Makita EK6100 12"/300mm Petrol Disc Cutter Model EK6100 is a Power cutter 305mm (12") equipped with 61cm³ 2-stroke engine with stratified scavenging system to comply with all known exhaust emission regulations. This model replaces the DPC6430.

Features: Lightweight; 1.2kg (2.6lbs) lighter than DPC6430 Enhanced air filtration; cyclone pre-separation system effectively removes dust particles away from intake air & reduces dust stuck on the filter Easy Start: Spring assisted starter & primer pump combined with optimized engine management significantly reduces compression resistance Fuel primer for easy starting Memory Power Ignition (MPI) with storage of ignition energy for easy restart Patented leak proof fuel tank ventilation avoids fuel leakage even when product is tilted Touch & Stop Switch
- for immediate shut-off High quality driving belt does not require tensioning once the proper tension is adjusted Developed in compliance with all known exhaust emission regulations Flow of exhaust gases is against dust direction for cleaner operating area Water supply with intake filter & fine adjustment for adequate dust protection Comes with: Tool kit 3 Year no cost service plan available, registration required on Makita website Cutting blade/wheel & Dust suppression kit is NOT included Please follow instructions carefully & do not operate machine until you have read the instructions fully & understand the fuel/oil mixture ratios


...

Makita EM2600L Brushcutter 2 Stroke Petrol 25.7cc This 1.2 Horse Power Brushcutter from Makita has a spring assisted recoil starter which dramatically reduces the effort of engine start up. The 2 Stroke machine has a catalytic exhaust system to keep emissions low & comply with regulations. For operator comfort there is an ergonomically designed loop handle with soft grip which also provides higher manoeuvrability.

Features: Environment-friendly 2-stroke engine with catalytic exhaust. Spring assisted start. Loop handle with rubberised soft grip Padded shoulder strap Cubic Capacity: 25.7 cc Engine: 2 stroke Bore Diameter: 25.4 mm Noise sound pressure: 98.5 d B (A) Noise sound power: 110 d B (A) Noise K factor: 2.5 d B (A) Spindle

Size: M8 x 1.25mm Left Engine: 2 stroke Horsepower: 1.2 hp Electronic ignition Power rating: 830 w Fuel Tank Capacity: 0.6 litres Vibration K factor: 1.5 m/sec



...

Makita EPH1000X 1" High Pressure Water Pump complete with hose, nozzle & filter

Features: MM4 4 stroke

...

Makita ER2600L 2 Stroke Linetrimmer 25.7cc The Makita ER2600L is a bent shaft petrol string trimmer equipped with 25.7m L 2-stroke engine. The linetrimmer is fitted with catalytic muffler to comply with the following exhaust emission regulations; EPA Phase 2, EU Stage 2. The enhanced nylon cutting head prevents its components falling down providing better repairability. More rounded edge of the eyelet hole protects the nylon cord from being accidentally cut.

Features: Compact protector for better view of cutting area, without losing performance for prevention of scattering of grass clippings Easy start system
- with primer High power output Clutch Primer Pump Diaphragm carburetor Bent shaft enhanced nylon cutting head  


...

Makita EW220R 2" 4-Stroke Centrifugal Water Pump complete with engine tool kit, 3 x hose bands, 2 x hose couplings & water filter The Makita EW220R is a self priming pump which requires no water for subsequent pumping operation once initial pumping is done, & the pumping capacity is large

Features: Efficient, cost effective operation Advanced engine for easy maintenance & trouble free operation Mini 4-Stroke engine Anti-vibration system Electronic ignition Lead free Comes with: Engine tool kit 3 x hose bands 2 x hose couplings Water filter Engine: 4-Stroke Fuel Tank Capacity: 2.8 litres Max. Delivery: 600 litres/min Max. head: 23m Max. Draw: 8m Weight: 22.5kg

...

Makita F-31153 Collated Dry Lining Screws Box of 1000 For BFR550 & 6843. 1000 Makita collated dry lining screws in strips of 50 supplied in a cardboard carton. For very fast & reliable auto-feed screwing with minimal jamming.

Features: Designed for usage with Makita BFR550, DFR550 or 6843 Carbon steel plasterboard screws

...

Makita Fast Battery Charger DC18RC-EU LXT Lithium Ion 18V charges Makita batteries from 14.4V to 18V The DC18RC-EU is a compact sized fast charger with the European 2-Pin plug which takes only 22 minutes to fully charge a 3.0 Ah Li-ion battery. The innovative computer controlled charging system provides optimum charge to each battery through the digital communication between charger & battery. The internal cooling fan keeps the battery temperature low for minimum charging time.

Features: The DC18RC has a cooling fan & Active 3 Controls This means that during the loading of the charging voltage, charging current, & temperature is held in the holes The cooling system blows cool air into the battery As a result, high temperatures occur in the battery, so that the battery life is extended, & the charging process is accelerated Compatible with the following battery models: BL1850 (196673-6) 5 Ah
- 45 Minutes BL1840 (196399-0) 4 Ah
- 36 Minutes BL1830 (194204-5) 3 Ah
- 22 Minutes BL1430 (194065-3) 3 Ah
- 22 Minutes BL1415 (194558-0) 1.3 Ah
- 15 Minutes  






...

Makita FS2300 Drywall Screwdriver complete with Phillips Insert Bit The Makita FS2300 is well balanced for easy handling & maneuverability.

Features: Lightweight aluminium gear housing for durability Silent synchronized pin clutch for quiet operation Quick release locator removal Forward/ Reverse rotation Variable speed trigger Lock on trigger facility Rubberized soft grip Double Insulated Bit Holder LED Job light Comes with: Durable belt clip Philips insert bit No Load Speed: 0-2500rpm Driving Shank: 1/4" Hex Capacity Drywall Screw: 6mm Capacity Self Drilling Screw: 6mm Torque: 15/25 Nm Input wattage: 570w Net Weight: 1.7kg  

...

Makita FS2500 Drywall TEK Screwdriver complete with Magnetic Socket Bit The Makita FS2500 is a screwdriver well balanced for easy handling & maneuverability, featuring the following main benefits; Best possible tool body for screwdriving. One-touch locator. More durable belt clip. LED job light.

Features: Lightweight aluminium gear housing for durability Silent synchronized pin clutch for quiet operation Quick release locator removal Forward/ Reverse rotation Variable speed trigger Lock on trigger facility Rubberized soft grip Strong metal belt clip Double insulated Bit holder Job light Comes with: Magnetic Socket Bit 5/16"

...