Makita DVR350Z 18 Volt Lithium Ion Vibrating Poker
- Body Only The Makita DVR350 is a cordless concrete vibrator used to remove
...

Makita DX01 Dust Extraction Unit for BHR242

Features: Designed to collect dust effectively with automatic operation

...

Makita DX02 Dust Extraction Unit for BHR243

Features: Designed to collect dust effectively with automatic operation

...

Makita EA3201S35B Chainsaw 32cc 2-Stroke Petrol 35cm complete with universal wrench, bar & chain & chain protection cover. The Makta EA3201S35B is an entry class Chain Saw with catalytic converter & anti-vibration design & an environmentally friendly 2 stroke 32cc engine. Light & compact, this small modern chainsaw has it all. Noise & emissions are as low as possible & with a powerful 32cc engine it has the grunt to tackle big logs. Nimble & manoeuvrable for tight spaces. Light enough to operate for long periods without fatigue.

Features: Environmentally friendly 2-Stroke engine with Catalytic muffler to comply with all current exhaust emission regulations On/off choke combination switch with automatic half throttle lock Intelligent ignition coil controls stable idling increases output power at practical RPM range with engine overrun protection Accumulated electric energy charge system allows easier re-starting Rapid start pull force required to start the machine is drastically reduced with spring-assisted recoil starter Tool less tension adjustment of saw chain Adjustable oil pump Fleece air filter for higher resistance to dust ingress Touch & stop switch a light touch on the switch stops the engine, & the switch returns automatically to the start position, eliminating flooding of the carburettor Engine: 2
- stroke Cubic Capacity: 32cc Bar

Size: 35cm Horsepower: 1.0hp Fuel Tank Capacity: 0.3 litres Oil Tank Capacity: 0.2 litres Chain Type/ Pitch: 3/8" / 0.050" Net Weight: 6kg




...

Makita EA3500F40B 35cc Petrol Chainsaw 40cm The Makita EA3500F40B is a unique ergonomically designed high performance chain saw.



...

Makita EB5300TH 4 Stroke Petrol Backpack Blower 52.5cc The EB5300TH from Makita is a petrol backpack blower equipped with a new 52.5m L 4-stroke engine which complies with strict exhaust emission regulations. The MM4-Stroke engine achieves a higher power to weight ratio Approx. 20% to 30% by its high combustion efficiency & newly developed compact spark plug. Comes with different lengths of pipe & 2 end nozzles of different shapes for more controllability. The backpack has padded straps & is so well designed the machine feels almost weightless.

Features: Diaphragm carburetor Mechanical decompression valve Primer Pump Tube mounted throttle Comfortable backpack harness 4 damper springs mounted between the engine & the backpack frame that reduce vibration on the back of operator even during long hours. Telescopic pipe & nozzle Anti-Icing: You can open the anti-icing valve by simply turning a dial to supply warm air from the engine to prevent the carburettor from icing up under cold environments. Anti-static
- Users hand is protected from static electric shock by enough insulation distance between grip & nozzle. Carry handle for easy transport In compliance with exhaust emission regulations: EPA Phase 2, EU Stage 2 Powerful & environmentally friendly 4-stroke engine. Low noise & clean exhaust emission. Comes With: Oil bottle Box wrench Driver Flexible pipe Swivel pipe Hose clamp End nozzle Flat nozzle Long pipe Short pipe Accessory bag [https://www.youtube.com/watch?v= Loje Bmvb 4 Hs] Cubic Capacity: 52.5 cc Max air velocity: 82 m/sec Max air

Volume: 15 m




...

Makita EH6000W 2-Stroke Petrol 22.2cc Hedge Trimmer 60cm complete with blade cover The Makita EH6000W is a double-sided blade petrol hedge trimmer equipped with the 22.2cc 2-stroke engine. It has an extra light design with improvements in noise, vibration & handling for environment & human friendliness.

Features: Forward exhaust direction Environmentally friendly 2-stroke engine developed in compliance with: CARB tier 3, EPA phase 2, EU stage 2 safety regulations of the EC directives Stain-free shear blade surface of glittering silver obtained by non-electrolyzed nickel plating that features high anti-abrasion surface for long lasting coating 5-Position rotating rear handle can be locked at 0 degree & 45/90 degrees left & right for vertical or angled trimming Forward exhaust direction for operator's health & comfort Specially designed engine
- has a low centre of gravity that provides better balance to the machine Equipped with floating structure of engine section & handle section for anti-vibration
- four damper springs absorb vibration from engine to integrated front & rear handles Comes with: Blade cover Socket wrench Hex wrench Blade Length: 600mm Engine capacity: 22.2cc Horsepower: 1hp (DIN) Strokes per minute: 4390spm Capacity: 400ml Engine: 2-Stroke Blade type: Double Sided Cutting diameter: 21.5mm Power rating: 0.68k W No load speed: 10500rpm Fuel mix: 50: 1 Net weight: 5.0kg



...

Makita EK6100 12"/300mm Petrol Disc Cutter Model EK6100 is a Power cutter 305mm (12") equipped with 61cm³ 2-stroke engine with stratified scavenging system to comply with all known exhaust emission regulations. This model replaces the DPC6430.

Features: Lightweight; 1.2kg (2.6lbs) lighter than DPC6430 Enhanced air filtration; cyclone pre-separation system effectively removes dust particles away from intake air & reduces dust stuck on the filter Easy Start: Spring assisted starter & primer pump combined with optimized engine management significantly reduces compression resistance Fuel primer for easy starting Memory Power Ignition (MPI) with storage of ignition energy for easy restart Patented leak proof fuel tank ventilation avoids fuel leakage even when product is tilted Touch & Stop Switch
- for immediate shut-off High quality driving belt does not require tensioning once the proper tension is adjusted Developed in compliance with all known exhaust emission regulations Flow of exhaust gases is against dust direction for cleaner operating area Water supply with intake filter & fine adjustment for adequate dust protection Comes with: Tool kit 3 Year no cost service plan available, registration required on Makita website Cutting blade/wheel & Dust suppression kit is NOT included Please follow instructions carefully & do not operate machine until you have read the instructions fully & understand the fuel/oil mixture ratios


...

Makita EM2600L Brushcutter 2 Stroke Petrol 25.7cc This 1.2 Horse Power Brushcutter from Makita has a spring assisted recoil starter which dramatically reduces the effort of engine start up. The 2 Stroke machine has a catalytic exhaust system to keep emissions low & comply with regulations. For operator comfort there is an ergonomically designed loop handle with soft grip which also provides higher manoeuvrability.

Features: Environment-friendly 2-stroke engine with catalytic exhaust. Spring assisted start. Loop handle with rubberised soft grip Padded shoulder strap Cubic Capacity: 25.7 cc Engine: 2 stroke Bore Diameter: 25.4 mm Noise sound pressure: 98.5 d B (A) Noise sound power: 110 d B (A) Noise K factor: 2.5 d B (A) Spindle

Size: M8 x 1.25mm Left Engine: 2 stroke Horsepower: 1.2 hp Electronic ignition Power rating: 830 w Fuel Tank Capacity: 0.6 litres Vibration K factor: 1.5 m/sec



...

Makita EPH1000X 1" High Pressure Water Pump complete with hose, nozzle & filter

Features: MM4 4 stroke

...