Makita DTW1001RTJ Impact Wrench 18V Brushless LXT Li-ion 3/4 Inch Square Drive with 2 x 5.0 Ah Batteries, Charger & Makpac Type 3 Connector Case The DTW1001 is a Cordless Impact Wrench with the power of AC models. With an extra high maximum tightening torque of 1050 Nm this machine certainly has plenty of grunt due to the high powered brushless motor & newly designed impact mechanism. It is equipped with twin LED joblights with pre-glow & afterglow function for working in dark areas & 3 Stage Impact Power Selection. This reduces fault tightening, you can suit the material of workpiece or screw at a push of a button.

Features: Electric brake Variable speed control trigger Reverse switch Twin LED job light with afterglow Electronic 3-stage impact power selection Extra-high max tightening torque Compact & lightweight design Brushless motor Best possible ergonomic handle Hammer case secured by 4 bolts Comes With: 2 x BL1850 5.0 Ah batteries DC18RC charger Makpac type 3 connector case [https://www.youtube.com/watch?v=z Et 9-_f SDT4] Battery Type: Li-ion Voltage: 18V Driving Shank: 3/4" (19mm) Square Impact Power Selection Hard / Med / Soft Impacts per min: 0
- 2, 200ipm / 2, 000ipm / 1, 800ipm No Load Speed: 0
- 1, 800rpm / 1, 000rpm / 900rpm Max Tightening Torque: 1050 Nm Nut Busting Torque: 1700 Nm Standard Bolt: M12-M30 High Strength Bolt: M10-M24 Sound Pressure: 98 d B (A) Sound Power: 109 d B (A) Sound K Factor: 3 d B (A) Vibration: 15.5 m/s 2 Vibration K Factor: 2 m/s Net Weight: 3.7kg



...

Makita DTW1001Z Impact Wrench 18V Brushless LXT Li-ion 3/4 Inch Square Drive (Body Only) The DTW1001 is a Cordless Impact Wrench with the power of AC models. With an extra high maximum tightening torque of 1050 Nm this machine certainly has plenty of grunt due to the high powered brushless motor & newly designed impact mechanism. It is equipped with twin LED joblights with pre-glow & afterglow function for working in dark areas & 3 Stage Impact Power Selection. This reduces fault tightening, you can suit the material of workpiece or screw at a push of a button. Sold without battery or charger.

Features: Electric brake Variable speed control trigger Reverse switch Twin LED job light with afterglow Electronic 3-stage impact power selection Extra-high max tightening torque Compact & lightweight design Brushless motor Best possible ergonomic handle Hammer case secured by 4 bolts Comes With: Belt clip [https://www.youtube.com/watch?v=z Et 9-_f SDT4] Battery Type: Li-ion Voltage: 18V Driving Shank: 3/4" (19mm) Square Impact Power Selection Hard / Med / Soft Impacts per min: 0
- 2, 200ipm / 2, 000ipm / 1, 800ipm No Load Speed: 0
- 1, 800rpm / 1, 000rpm / 900rpm Max Tightening Torque: 1050 Nm Nut Busting Torque: 1700 Nm Standard Bolt: M12-M30 High Strength Bolt: M10-M24 Sound Pressure: 98 d B (A) Sound Power: 109 d B (A) Sound K Factor: 3 d B (A) Vibration: 15.5 m/s 2 Vibration K Factor: 2 m/s Net Weight: 3.7kg



...

Makita DTW1002RTJ Impact Wrench 18V Brushless LXT Li-ion 1/2 Inch Square Drive with 2 x 5.0 Ah Batteries, Charger & Makpac Type 3 Connector Case The DTW1002 is a Cordless Impact Wrench with the power of AC models. With an extra high maximum tightening torque of 1000 Nm this machine certainly has plenty of grunt due to the high powered brushless motor & newly designed impact mechanism. It is equipped with twin LED joblights with pre-glow & afterglow function for working in dark areas & 3 Stage Impact Power Selection. This reduces fault tightening, you can suit the material of workpiece or screw at a push of a button.

Features: Electric brake Variable speed control trigger Reverse switch Twin LED job light with afterglow Electronic 3-stage impact power selection Extra-high max tightening torque Compact & lightweight design Brushless motor Best possible ergonomic handle Hammer case secured by 4 bolts Comes With: 2 x BL1850B 5.0 Ah batteries with state of charge LED's DC18RC charger Makpac type 3 connector case

...

Makita DTW1002Z Impact Wrench 18V Brushless LXT Li-ion 1/2 Inch Square Drive (Body Only) The DTW1002 is a Cordless Impact Wrench with the power of AC models. With an extra high maximum tightening torque of 1000 Nm this machine certainly has plenty of grunt due to the high powered brushless motor & newly designed impact mechanism. It is equipped with twin LED joblights with pre-glow & afterglow function for working in dark areas & 3 Stage Impact Power Selection. This reduces fault tightening, you can suit the material of workpiece or screw at a push of a button. Sold without battery or charger.

Features: Electric brake Variable speed control trigger Reverse switch Twin LED job light with afterglow Electronic 3-stage impact power selection Extra-high max tightening torque Compact & lightweight design Brushless motor Best possible ergonomic handle Hammer case secured by 4 bolts Comes With: Belt clip

...

Makita DTW190RMJ Impact Wrench 18V Cordless with 2 x 4.0 Ah Batteries, DC18RC Charger & Makpac Carry Case Model DTW190 is an entry level 18V cordless impact wrench with a 1/2 inch square drive & an optimal tightening torque of 190 N.m. Equipped with battery protection circuit which is designed to protect the battery from damages due to overdischarge, high temperature or overload current. It is fitted with an LED Joblight with pre-glow function, when you pull on the trigger switch the light comes on before the motor starts.

Features: Electric brake Variable speed control trigger Forward/reverse rotation Battery protection circuit Ergonomically designed handle with rubberised soft grip fits your hand perfectly to provide maximum control & comfort

...

Makita DTW251RFE 18 Volt LXT Lithium Ion Impact Wrench complete with 2 x 3ah Batteries, Charger & Kitbox The Makita DTW251 has high operational efficiency with high torque. Ideal for steel fabrication, steel erection or for automotive work. Able to deliver up to 3200 blows per minute this little machine will make your life much easier. The compact size & low weight of this impact wrench provides more control & manoeuverability. Low weight is due to the powerful 4 pole motor. There is an ergonomic rubberised grip with non-slip dimples so your hold is not compromised no matter the conditions. The LED light with after glow function provides vital lighting in poor conditions. The light can be switched on before tool starts by pressing on trigger slightly. Will run on BL1830 3 Ah, BL1840 4 Ah or BL1850 5 Ah Batteries & is supplied with 3 Ah batteries.

Features: Compac & lightweight
- weighs only 1.7kg Maximum fastening torque of 230 Nm (170ft.lbs) Conveniently located push button for forward & reverse Phosphorescent bumper
- high visiblity LED Job light with afterglow
- job done in poor lighty 1/2" square drive Comes With: 2 x 3 Ah batteries DC18RC battery charger Heavy duty kitbox [http://www.youtube.com/watch?v=z 2UHdspo Zs 8] PLEASE NOTE
- product in the videos is a slightly older version of this machine but with the same specifications Machine compatible with Makita BL1830, BL1840 & BL1850 batteries Drive: 1/2" square Max Torque: 230 Nm Blows per minute: 0-3, 200 No Load Speed: 0-2, 100 Compatible with 3 Ah, 4 Ah & 5 Ah Batteries Net Weight: 1.7kg 18 volts





...

Makita DTW251RMJ 18 Volt LXT Lithium Ion Impact Wrench complete with 2 x 4.0ah Batteries, Charger & Kitbox The Makita DTW251 has high operational efficiency with high torque. Ideal for steel fabrication, steel erection or for automotive work. Able to deliver up to 3200 blows per minute this little machine will make your life much easier. The compact size & low weight of this impact wrench provides more control & manoeuverability. Low weight is due to the powerful 4 pole motor. There is an ergonomic rubberised grip with non-slip dimples so your hold is not compromised no matter the conditions. The LED light with after glow function provides vital lighting in poor conditions. The light can be switched on before tool starts by pressing on trigger slightly. Will run on BL1830 3 Ah, BL1840 4 Ah or BL1850 5 Ah Batteries & is supplied with 4 Ah batteries.

Features: Compact & lightweight
- weighs only 1.7kg Maximum fastening torque of 230 Nm (170ft.lbs) Conveniently located push button for forward & reverse Phosphorescent bumper
- high visiblity LED Job light with afterglow
- job done in poor lighty 1/2" square drive Comes With: 2 x 4 Ah batteries DC18RC battery charger Heavy duty kitbox [http://www.youtube.com/watch?v=z 2UHdspo Zs 8] PLEASE NOTE
- product in the videos is a slightly older version of this machine but with the same specifications Machine compatible with Makita BL1830, BL1840 & BL1850 batteries Drive: 1/2" square Max Torque: 230 Nm Blows per minute: 0-3, 200 No Load Speed: 0-2, 100 Compatible with 3 Ah, 4 Ah & 5 Ah Batteries Net Weight: 1.7kg 18 volts





...

Makita DTW251Z 18 Volt LXT Lithium Ion Impact Wrench (Body Only) The Makita DTW251 has high operational efficiency with high torque. Ideal for steel fabrication, steel erection or for automotive work. Able to deliver up to 3200 blows per minute this little machine will make your life much easier. The compact size & low weight of this impact wrench provides more control & manoeuverability. Low weight is due to the powerful 4 pole motor. There is an ergonomic rubberised grip with non-slip dimples so your hold is not compromised no matter the conditions. The LED light with after glow function provides vital lighting in poor conditions. The light can be switched on before tool starts by pressing on trigger slightly. Will run on BL1830 3 Ah or BL1840 4 Ah Batteries (not included).

Features: Compacty & lightweigh
- weighs only 1.7kg Maximum fastening torque of 230 Nm (170ft.lbs) Conveniently located push button for forward & reverse Phosphorescent bumper
- high visiblity LED Job light with afterglow
- job done in poor lighty 1/2" square drive Comes With: Belt clip   No batteries, charger or kitbox included. PLEASE NOTE
- product in the videos is a slightly older version of this machine but with the same specifications Machine compatible with Makita BL1830 & BL1840 batteries





...

Makita DTW251Z 18 Volt LXT Lithium Ion Impact Wrench (Body Only) This e Xclusive Toolstop Deal consists of the Makita DTW251Z 18 Volt Impact Wrench & the Makita 831373-8 Black 10 Inch / 225mm Cube Tool Bag. The Makita DTW251 has high operational efficiency with high torque. Ideal for steel fabrication, steel erection or for automotive work. Able to deliver up to 3200 blows per minute this little machine will make your life much easier. The compact size & low weight of this impact wrench provides more control & manoeuverability. Low weight is due to the powerful 4 pole motor. There is an ergonomic rubberised grip with non-slip dimples so your hold is not compromised no matter the conditions. The LED light with after glow function provides vital lighting in poor conditions. The light can be switched on before tool starts by pressing on trigger slightly. Will run on BL1830 3 Ah, BL1840 4 Ah & BL1850 5 Ah Batteries (not included). The Makita 831373-8 is a padded heavy duty cube tool bag with 3 velcro style removable internal dividers. There is also a pocket & slots for drills, pens or small batteries in the lid. Measuring 10 inches or 225mm in all directions it has a surprising amount of storage space & will easily cope with storing a cordless drill, charger & various other tools.

Features: Compacty & lightweigh
- weighs only 1.7kg Maximum fastening torque of 230 Nm (170ft.lbs) Conveniently located push button for forward & reverse Phosphorescent bumper
- high visiblity LED Job light with afterglow
- job done in poor lighty 1/2" square drive Comes With: Belt clip No batteries, charger or kitbox included. [http://www.youtube.com/watch?v=z 2UHdspo Zs 8] PLEASE NOTE
- product in the videos is a slightly older version of this machine but with the same specifications Machine compatible with Makita BL1830, BL1840 & BL1850 batteries Drive: 1/2" square Max Torque: 230 Nm Blows per minute: 0-3, 200 No Load Speed: 0-2, 100 Compatible with 3 Ah & 4 Ah Batteries Net Weight: 1.7kg 18 volts





...

Makita DTW281RMJ 18V Cordless li-ion Impact Wrench with 2 x BL1840B 4.0 Ah Batteries, DC18RC Charger, Belt Clip & a Type 2 Makpac Carry Case. The Makita DTW281 1/2 Inch Drive Cordless Impact Wrench is an advanced version of the DTW251. It features BLDC motor (Brushless DC motor) for a more compact body & higher power. With a maximum tightening torque of 280 N.m. / 210 ft.lb from a machine with an overall length of only 147mm. Satisfied customers who bought this tool say: " Revolutionise the way you work. So easy & speeds up any task. Undo those stubborn bolts with ease
- no more cut fingers when your spanner flies off."
- " Quick & easy to use with no strain on your arm, great bit of kit."
- " It's just perfect all round."
- " Lots of power & nice & small."

Features: Electronic 3-stage impact power selection to reduce fault tightening Battery fuel gauge Variable speed control by trigger LED Job light with pre-glow & afterglow functions Forward/reverse rotation Electric brake Ergonomic soft grip Compact overall length Comes With: 2 x BL1840B 4.0 Ah Batteries DC18RC Charger Makpac Type 2 Carry Case Belt Clip [https://www.youtube.com/watch?v= Ex Ef Ktfxvc 8] Driving Shank 1/2" Square Blows per Minute (Hi)
- ipm 0
- 3500 ipm Blows per Minute (Med)
- ipm 0
- 2600 ipm Blows per Minute (Lo)
- ipm 0
- 1800 ipm Standard Bolt M10-M20 High Tensile Bolt M10-M16 Maximum Output 280 w No Load Speed (hard/med/soft)0-2800 / 2100 / 1600 rpm Max Fastening Torque 280 Nm Vibration: Fastening Bolt 11.5 m/sec











...