Makita DLX6068PT 18V li-ion 6 Piece Cordless Kit (3 x 5.0 Ah Batteries) with Twin Charger The DLX6068 from Makita is the successor model to the DLX6017 but has the upgraded DTD152 impact driver & DML802 torch Contents: DHP453 Combi Drill DTD152 Impact Driver DHR202 SDS+ Rotary Hammer DJV180 Jigsaw DSS611 Circular Saw DML802 Flashlight 3 x BL1850B 5 Ah li-ion batteries DC18RD Battery Charger Large Heavy Duty Trolley   DHP453 Combi Drill

Features: Single sleeve keyless drill chuck for easy bit installation & removal Compact & lightweight design for easy handling High comfort grips
- non-slip even in wet conditions 2 Speed gearbox
- high / low speed change lever All metal gears
- for added life & durability Electronic brake control Forward/reverse Variable speed trigger DTD152 Impact Driver

Features: Electric brake Mechanical 2-speed control Variable speed control trigger Forward/reverse rotation Twin LED job light One touch bit installation Ergonomic soft grip handle Compact overall length of 137mm Lightweight design Battery protection circuit All metal gears DHR202 SDS+ Rotary Hammer

Features: 3-Mode Switch for rotation only, hammering with rotation, or hammering only 2x faster drilling with synchronized RPM & BPM for more efficient drilling Built-in torque limiter clutch disengages if bit jams when hitting rebar More compact design at only 330mm long & weighs only 3.2kg for less operator fatigue One touch sliding chuck
- for easy bit changes Ergonomic shape fits like a glove with even pressure & easy control
- rubberised handle has anti slip dimples LXT Lithium-Ion provides longer run time, 5x lower self-discharge (for use any time) & 16 firm holding contact terminals (for constant high power) Electric brake Forward/reverse rotation Job light with afterglow function
- illuminates job in poor lighting conditions Rotary hammer action Rotary only action Variable speed trigger DJV180 Jigsaw

Features: Ergonomically rubberised handle provides comfortable gripping & more control while minimising hand fatigue & pain The large 2 finger variable speed trigger makes this jigsaw easy to operate even with gloves on 3 orbital settings + straight cut Blower will clear the pencil line of dust Lightweight & compact Tool-less blade change
- push in lock system enables very fast blade changes LED light will illuminate your cut line Smooth & powerful cutting at the high stroke speed at 2, 600 spm Double insulated Soft start DSS611 Circular Saw

Features: Lightweight & compact Rigid aluminium base provides high quality & toughness Double safety trigger will prevent accidental starting, is easy to operate even with gloved hands & can be operated from both sides of the handle Bevel cuts up to 50 degrees Smooth & powerful cutting at the high rotational speed of 3, 700 rpm delivered from enhanced motor Rubberised soft grip which provides comfortable handling & more control but also minimises hand strain Safety cover with calibration line for adjusting depth Removable dust nozzle allows a vacuum to be connected Hex wrench is storable on board the saw DML802 Flashlight

Features: 3.2 Watt LED 160 lumens light power Ability to tilt in nine different positions which means no matter where you need the light to point the lamp wont let you down Can be powered by either 14.4v or 18v li-ion batteries from Makita


















...

Makita DLX6072PT 18V 6 Piece Cordless Kit (3 x 5.0 Ah Batteries) The Makita DLX6072PT 18V 6 Piece Cordless Kit Contains: DTD152 Impact Driver DHP458 Combi Drill DGA452 Angle Grinder DJR186 Reciprocating Saw DSS610 Circular Saw DML185 Torch DC18RD Twin Charger 831279-0 Wheeled bag 3 x BL1850B 5.0 Ah Batteries   DTD152 Impact Driver

Features: Electric brake Variable speed control by trigger Forward/reverse rotation Twin LED job light Ergonomic soft grip Compact & lightweight design Equipped with Battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current. High rotation speed DHP458 Combi Drill

Features: Enhanced dust & drip-proof performance for use in outdoor applications or harsh environments. Single sleeve keyless chuck allows for easy bit installation/removal by one h&. Twin LED Job light with pre-glow & afterglow functions DGA452 Angle Grinder

Features: 22 minute charge time with the air cooled Makstar Optimum Charging System Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430% greater run time Lithium-ion's 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni-MH battery 4 pole motor Anti-restart function with warning lamp Capable of using wheels or discs for mains grinders Easy grip body Electronic current limiter with warning lamp High comfort grips DJR186 Reciprocating Saw

Features: Tool-less blade change. Trigger switch with lock-off lever Electric brake Variable speed Ergonomically designed handle Newly designed crank mechanism for higher efficiency High power DSS610 Circular Saw

Features: Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430% greater run time Lithium-ion's 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni-MH battery Double safety trigger High comfort grips Large lock off lever LED job light that creates & easy to trace cutting line Removable dust nozzle Built in blow-off nozzle DML185 Torch

Features: A very lightweight & flexible torch, with very long run time Sub-brand: Li-ion Application: Illumination, kitchens, site, cordless Swivel head Comes With: DC18RD Twin Charger Wheeled Carry Bag 3 x BL1850B 5.0 Ah Batteries











...

Makita DML184 Cordless 14.4V / 18V LXT Li-ion Fluorescent Light & Torch (Body Only) The DML184 has twin Fluorescent tubes as well as a torch. Runs on Makita batteries from 14.4V to 18V. Battery & charger sold separately. Providing two different types of lighting the Makita DML184 has fluorescent tubes which can provide light in a static position of a torch at the end to be used as a flashlight on the move.

Features: Works with 14.4 or 18 Volt Makita lithium ion batteries 2-function
- either fluorescent or standard bulb Designed to provide bright area lighting with its 13 watt fluorescent light Extended run time with up to 15 hours incandescent lighting & 4 hours of fluorescent light per charge New Xenon bulb design for extra incandescent brightness Slim, compact design at only 14.5" inches in length Retractable skyhook lets you hang the fluorescent light for hands-free illumination of your work area Comes with: Hang strap Swivel hook Batteries not included Voltage: 14.4V / 18V 5.0 Ah or 1.3 Ah continuous product use (minutes): Fluorescent light: 200
- 3.0 Ah / Flash light: 900
- 3.0 Ah Overall length: 370mm Net weight 0.73kg




...

Makita DML186 18V LED Torch (Body Only) The Makita DML186 18V LED Torch has 6 high-efficiency LEDs for long continuous bright illumination. The LED bulbs provide high efficiency & long life. This torch is suitable for use with all makita lithium ion batteries.

Features: Bright LED illumination Push button on/off switch Adjustable hand strap with hook & loop fastener 6 High effeciency LEDs

...

Makita DML801 Cordless Rechargeable LED Torch (Body Only) Supplied without battery & charger. Cordless torch with 12 LED lights. Brightness in 2 steps doubles the operating time. The rotating & foldable lamp head can be folded in 7 positions. With a metal hook for hanging there is no situation this light will let you down.

Features: Takes 14.4V or 18V Battery (BL1415, BL1430, BL1815, BL1830) Rotating head to direct light exactly where needed Operating Time using 6 LED or 12 LED. Approx. 3 or 8 hours BL1415 Approx. 7 or 16 hours BL1430 Approx. 4 or 10 hours BL1815 Approx. 9 or 22 hours BL1830 Weight: 0.3kg

...

Makita DML805 Corded & 14.4V /18V Cordless LED Worklight 240V (Body Only) The Makita DML805 corded & cordless LED worklight is compatible with both 14.4V & 18V Makita Li-ion batteries. It also will happily run on mains electricity with the 240 Volt 3 pin plug. Comes as a body only so no battery or charger is supplied.

Features: Can be powered by both AC & DC (14.4v/18v Li-ion battery) Battery capacity warning lamp 360 degrees vertical light angle adjustment Twenty 0.5W white-light LEDs; deliver bright & even light Carrying handle for easy transport that also serves as a hanging hook Power supply cord 2.5m

...

Makita DMR102 Jobsite Radio works from mains power or from your power tool batteries, complete with AC power adaptor The Makita DMR102 has the ability to accept 7.2v, 9.6v, 10.8v, 12v, 14.4v & 18v li-ion batteries. It also has distinctive elastomer bumpers & silver coloured front control panel.

Features: Silver Front control panel & newly designed Elastomer bumpers Compatible with all Makita batteries except 24v & 36v Elastomer bumpers & metal pipes protect against rough handling Dual Power Sources Digital quartz display Auto-scan & clock set button Headphone Jack 2 x Aux port for ipods & CD players AC Adapter Jack Timer set button Sound volume & Manual tuning button Digital quartz display with backlight Power on-off & Off-timer button Front Control Panel FM/AM band selection & Mono-stereo change button Carry Handle with soft grip swivels 90

...

The Makita jobsite radio is ideal for any construction site or workshop. The DMR102W radio is powerful & robust, combining versatile power options with an eye-catching new design. Developed for on-site use, the Makita jobsite radio offers high-quality sound in a tough, durable package. The radio is perfect for indoor workshops & factories or for use on outdoor construction sites or building projects. Tough materials are ideally suited to outdoor use & the shower proof radio can tolerate up to 5 minutes of rain. Power is never a problem with a radio that can be plugged into the standard mains electric supply or used with your professional power tool batteries including the Makita Ni-Cd, Ni-MH as well as 7.2v, 9.6v, 10.8v, 12v, 14.4v & 18v li-ion batteries. The distinctive bumpers in tough elastomer complement the white casing & silver front panel & this robust radio creates a comfy workplace atmosphere. It can be easily tuned to digital stations using the auto scan feature or manual button, & the digital quartz display with built-in backlight means that you can see clearly from most angles. This versatile radio also has an on/off power button, an 'off' timer feature & a clock set button. Two ports for iPods, smartphones, & CD players let you play your favourite recorded or stored music. A well-designed soft grip carrying handle with 90-degree rotation makes the radio highly portable & offers a convenient way to hang the Makita from hooks or pipes.

Features: Silver Front control panel & newly designed Elastomer bumpers Compatible with all Makita batteries except 24v & 36v Elastomer bumpers & metal pipes protect against rough handling Dual Power Sources Digital quartz display Auto-scan & clock set button Headphone Jack 2 x Aux port for ipods & CD players AC Adapter Jack Timer set button Sound volume & Manual tuning button Digital quartz display with backlight Power on-off & Off-timer button Front Control Panel FM/AM band selection & Mono-stereo change button Carry Handle with soft grip swivels 90

...

Makita DMR104 Jobsite Radio complete with DAB, AC adaptor & aerial Makita Blue DMR104 is also available in WHITE The DMR104 DAB Jobsite Radio gives you the flexibility of listening to your favourite FM channels as well as digital channels when you're working on the job site. Rugged & showerproof & packing a punch in terms of loudness you are sure to turn heads when you turn this on. The radio will work from the mains with the supplied adaptor but you can also plug in your Makita power tool batteries to listen. This model accepts virtually any battery manufactured by Makita from 7.2 up to 18 volts. You can also plug in your ipod or MP3 player & listen to it using the aux plug socket.

Features: Rugged & robust DAB radio whose bumpers & metal pipes protect against rough handling Rich sound with a wide choice of channels & stereo speakers Powerful output, FM & digital (DAB) stations Showerproof (water resistant to IPX4), with a tough moulded ABS casing Anti shock loud speaker system Working from mains power & many Makita batteries Brightness of large LCD display can be adjusted Manual/preset/scan tuning Rotary tuning & volume control 5 preset stations for each band Micro USB (Universal Serial Bus) port for software upgrade Flexible FM antenna can be removed & stored inside battery cover Can be used as a stereo speaker by connecting to external audio source such as mobile phone, MP3 player or iPod with a commercially available cable Comes with: AC power adapter Carry handle Aerial Compatible with all 18V li-ion batteries including BL1830 3 Ah, BL1840 4 Ah & BL1850 5 Ah

...

Makita DMR104W Jobsite Radio complete with DAB, AC adaptor & aerial Makita White DMR104W is also available in BLUE The DMR104W DAB Jobsite Radio gives you the flexibility of listening to your favourite FM channels as well as digital channels when you're working on the job site. Rugged & showerproof & packing a punch in terms of loudness you are sure to turn heads when you turn this on. The radio will work from the mains with the supplied adaptor but you can also plug in your Makita power tool batteries to listen. This model accepts virtually any battery manufactured by Makita from 7.2 up to 18 volts. You can also plug in your ipod or MP3 player & listen to it using the aux plug socket.

Features: Rugged & robust DAB radio whose bumpers & metal pipes protect against rough handling Rich sound with a wide choice of channels & stereo speakers Powerful output, FM & digital (DAB) stations Showerproof (water resistant to IPX4), with a tough moulded ABS casing Anti shock loud speaker system Working from mains power & many Makita batteries Brightness of large LCD display can be adjusted Manual/preset/scan tuning Rotary tuning & volume control 5 preset stations for each band Micro USB (Universal Serial Bus) port for software upgrade Flexible FM antenna can be removed & stored inside battery cover Can be used as a stereo speaker by connecting to external audio source such as mobile phone, MP3 player or iPod with a commercially available cable Comes with: AC power adapter Carry handle Aerial Compatible with all 18V li-ion batteries including BL1830 3 Ah, BL1840 4 Ah & BL1850 5 Ah

...