Makita 18 Volt Cordless Lithium Ion Combi Drill, SDS+ Rotary Hammer & Reciprocating Saw Package
- exclusive to Toolstop Contents:
...

Makita DHP459RF3W WHITE 18v Cordless li-ion 13mm Brushless 2-speed Combi Drill complete with 3 x 3 Ah Batteries, charger & carry case The Makita DHP459 Cordless Hammer Driver Drill has been developed specially for light to medium duty drilling & fastening applications. It has a very short body which makes it absolutely ideal for working in tight situations. It is powered by a Brushless DC Motor which is maintenance free, no more replacing brushes. This also has the added benefit of enabling lower amperage & heat production which increases power & reduces battery wear. Very useful in hard industrial applications requiring long continuous product use. Basically more work amount on a single full battery charge. Included are 3 x BL1830 3 Ah batteries & the DC18RC Charger which will deliver a full charge in approx 22 minutes. You'll never run out of power with this kit.

Features: Compact design with an overall length of only 192mm Single sleeve keyless chuck allows for easy bit installation/removal by one hand Rubberised anti-slip ergonomic handle for comfort LED Job light with pre-glow function
- illuminate the job in poor lighting conditions BLDC motor specially designed to provide more work amount on a single full battery charge Comes with: 3 x 3 Ah li-ion batteries Battery charger Kitbox [http://www.youtube.com/watch?v=pdbk NFNAO8g] [http://www.youtube.com/watch?v=t W Af X Om Io YY] [http://www.youtube.com/watch?v=1y 6iu Lfb 5VA] PLEASE NOTE
- video shows older model (in blue) combi drill with same

Specification Machine compatible with Makita BL1830 & BL1840 batteries Electric Brake: Yes No Load Speed: 0-1500/400 rpm Max Torque: S/H 25 / 45 Nm Battery Type: Lithium-ion Torque Settings: 16 + drill Charging Time: 22 min Variable Speed Control Trigger: Yes Max. in masonry: 13 mm Max. in steel: 13 mm Max. in wood: 38 mm Blows per Minute: 0-22500/6000 bpm Voltage: 18 v Net weight: 1.7kg





...

Makita DHP459RMJ 18v Cordless li-ion 13mm Brushless 2-speed Combi Drill (2 x 4 Ah Batteries) The Makita DHP459 Cordless Hammer Driver Drill has been developed especially for light to medium duty drilling & fastening applications. It has a very short body which makes it absolutely ideal for working in tight situations. It is powered by a Brushless DC Motor which is maintenance free, no more replacing brushes. This also has the added benefit of enabling lower amperage & heat production which increases power & reduces battery wear. Very useful in hard industrial applications requiring long continuous product use. Basically more work amount on a single full battery charge. Included are 2 x BL1840 4 Ah batteries & the DC18RC Charger which will deliver a full charge in approx 30 minutes. You'll never run out of power with this kit.

Features: Compact design with an overall length of only 192mm Single sleeve keyless chuck allows for easy bit installation/removal by one hand Rubberised anti-slip ergonomic handle for comfort LED Job light with pre-glow function
- illuminate the job in poor lighting conditions BLDC motor specially designed to provide more work amount on a single full battery charge Comes with: 2 x 4 Ah li-ion batteries Battery charger Makpac carry case [http://www.youtube.com/watch?v=pdbk NFNAO8g] [http://www.youtube.com/watch?v=t W Af X Om Io YY] [http://www.youtube.com/watch?v=1y 6iu Lfb 5VA] PLEASE NOTE
- video shows older model combi drill with same

Specification Machine compatible with Makita BL1830, BL1840 & BL1850 batteries Electric Brake: Yes No Load Speed: 0-1500/400 rpm Max Torque: S/H 25 / 45 Nm Battery Type: Lithium-ion Torque Settings: 16 + drill Charging Time: 22 min Variable Speed Control Trigger: Yes Max. in masonry: 13 mm Max. in steel: 13 mm Max. in wood: 38 mm Blows per Minute: 0-22500/6000 bpm Voltage: 18 v Overall length: 192mm Net weight: 1.7kg





...

Makita 18 Volt Cordless Lithium Ion Drilling & Screwdriving Package
- exclusive to Toolstop Contents: DHP459 2-speed brushless
...

Makita DHP480RF1J Combi Drill 18V Cordless li-ion Brushless complete with 1 x 3.0 Ah battery, DC18RC Charger & Makpac Type 2 Connector Case The Makita DHP480 is equipped with XPT (e Xtreme Protection Technology) essential in harsh outdoor enviroments as it gives added protection against dust & dripping water. It is powered by a Brushless DC Motor which is maintenance free, no more replacing brushes. This also has the added benefit of enabling lower amperage & heat production which increases power & reduces battery wear. Very useful in hard industrial applications requiring long continuous product use. For comfort during use the rubberised handle has been contoured & widened according to the U shape formed between the users thumb & index finger. At 199mm in length Makita have created a potent maneoverable Combi Drill. People who bought this said, " Power to weight ratio is awesome", " Light & compact, plenty of grunt & a good choice of settings that will suit all tasks asked of it. Easy on the wrist, tough on concrete", "it's doing what I bought it to do"

Features: 1.4 times the work amount of BHP456 on a single battery charge because of no friction loss caused by brushes XPT (e Xtreme Protection Technology)
- Enhanced dust & drip-proof design to ensure reliable operation even under bad weather Rubberized soft grip provides comfortable & sure grip Variable speed control by trigger LED job light
- with preglow function Compact overall length of 199mm All metal gear construction
- extra high transmission durability Single sleeve keyless chuck allows for easy bit installation / removal by one hand Battery fuel gauge: The power remaining in the battery can be indicated in 3 stages simply by pushing a button 3 lights on: more than 50% of full battery capacity 2 lights on: 20% to 50% of full battery capacity 1 light on: less than 20% of full battery capacity Comes with: DC18RC Battery charger 1 x 3.0 Ah BL1830 18V li-ion battery Type 2 Makpac connector case [http://www.youtube.com/watch?v=VNNx Plj 350Q] Battery Type: Li-ion Torque Settings: 16 + drill Vibration K factor: 1.5 m/sec




...

Makita DHP480RTJ 18V Cordless Li-ion Combi Drill (2 x 5 Ah Batteries) in Makpac Case The Makita DHP480 is a fantastic Combi Drill capable of drilling 76mm holes in wood & with 115 Nm of torque. With 2 Speeds & 16 Torque settings this versatile drill comes with a DC18RC Charger, 2 x 5.0 Ah Batteries & a Makpac Connector Case Type 3.

Features: Compact overall length of 185mm 1.4 times the work amount of BDF456 on a single battery charge because of no friction loss caused by brushes XPT (e Xtreme Protection Technology)
- Enhanced dust & drip-proof design to ensure reliable operation even under bad weather Rubberized soft grip provides comfortable & sure grip Variable speed control by trigger LED job light Single sleeve keyless chuck allows for easy bit installation/removal by one hand Battery fuel gauge Comes With: 2 x 5 Ah li-ion batteries (BL1850) DC18RC battery charger Makpac carry case Torque Settings 16 + drill Vibration K factor 1.5 m/sec


...

Makita DHP480Z 18V Cordless li-ion Brushless Combi Drill
- body only The Makita DHP480 is equipped with XPT (e Xtreme Protection
...

Makita DHP481 Combi Drill With DC18RC Charger & Mak Pac Case (2 x 5.0 Ah Batteries) This kit contains the Makita DHP481 Combi Drill which is equipped with XPT (e Xtreme Protection Technology) & brushless motor which enhances the runtime of the drill. This drill is strong, more compact & has a long runtime. Also with this kit is the DC18RC 18V Fast Charger & 2 x 5.0 Ah Bl 1850B Batteries. DHP481

Features: Single sleeve keyless chuck allows for easy bit installation & removal with 1 hand Torque setting ring
- wider torque range of 1-10 Nm in clutch mode allows for versatile applications Mechanical 2 speed gearing Variable speed trigger All metal gear construction for extra high transmission durability Twin LED job light with afterglow Long rigid side handle helps stabilise the bit for steady drilling or screwdriving In order to provide maximum thrust to the bit, the top back of the handle is ergonomically contoured & widened to perfectly fit the U-shape formed between user's thumb & index finger Battery fuel gauge
- The power remainin in the battery is indicated with the push of a button
- 3 lights on: more than 50% of full battery capacity, 2 lights on: 20% to 50% of full battery capacity, 1 light on: less than 20% of full battery capacity Ribbed soft grip enables all finger tips to hold the handle securely against the strong rotational force of counter torque even in single handed operation DC18RC

Features: The DC18RC has a cooling fan & Active 3 Controls This means that during the loading of the charging voltage, charging current, & temperature is held in the holes The cooling system blows cool air into the battery As a result, high temperatures occur in the battery, so that the battery life is extended, & the charging process is accelerated BL1850B

Features: Charge level indicator Foam cell technology Slide on battery
- firm holding with multi contacts & shock absorbing pack, will not puncture & remains cool even in heavy use Unbeatable 45 minute charge time Same weight & size as 3 Ah or 4 Ah battery Works with your current Li-ion Chargers Longer run time & battery life Comes With: Battery charger 2x 5.0 Ah 18V li-ion batteries Makpac Type 2 carry case Long rigid side handle









...

Makita DHP481RMJ 18V Cordless li-ion Brushless Combi Drill complete with 2 x 4 Ah batteries, charger & Connector Kitbox The Makita DHP481RMJ is equipped with XPT (e Xtreme Protection Technology & brushless motor which enhances the runtime of the drill.

Features: Forward/reverse rotation Single sleeve keyless chuck allows for easy bit installation/removal by one h&. Electric brake Twin LED job light with afterglow 2 mechanical gears Battery fuel gauge
- 3 lights on = more than 50% battery capacity, 2 lights on = 20 to 50% capacity, 1 light on = less than 20% full battery capacity Variable speed control by trigger Best possible ergonomic handle for drill-driver applications Compact overall length of 205mm XPT
- Extreme Protection Technology BLDC motor specially designed to provide, above all, more work amount on a single full battery charge Comes with: Battery charger 2x 4.0 Ah 18V li-ion batteries Makpac Type 2 carry case [https://www.youtube.com/watch?v= Rj P-ZPh 3268] Chuck Capacity: 1.5
- 13 mm Blows per Minute (Hi)
- ipm: 0
- 31, 500 ipm Blows per Minute (Lo)
- ipm: 0
- 8, 250 ipm No Load Speed (Hi): 0
- 2100 rpm No Load Speed (Lo): 0
- 550 rpm Voltage: 18 v Max. in wood: 76 mm Max. in masonry: 16 mm Max. in steel: 13 mm Torque Settings: 21 + drill Max. fastening torque (soft joint): 60 Nm Max. fastening torque (hard joint): 115 Nm Lock torque: 125 Nm Maximum output: 640w Battery Type: Lithium-ion Vibration K factor: 1.5 m/sec










...

Makita DHP481RTJ 18V Cordless li-ion Brushless Combi Drill complete with 2 x 5 Ah batteries, charger & Connector Kitbox The Makita DHP481RTJ is equipped with XPT (e Xtreme Protection Technology) & brushless motor which enhances the runtime of the drill. This drill is stronger, more compact & has a longer runtime than the previous model.

Features: Single sleeve keyless chuck allows for easy bit installation & removal with 1 hand Torque setting ring
- wider torque range of 1-10 Nm in clutch mode allows for versatile applications Mechanical 2 speed gearing Variable speed trigger All metal gear construction for extra high transmission durability Twin LED job light with afterglow Long rigid side handle helps stabilise the bit for steady drilling or screwdriving In order to provide maximum thrust to the bit, the top back of the handle is ergonomically contoured & widened to perfectly fit the U-shape formed between user's thumb & index finger Battery fuel gauge
- The power remainin in the battery is indicated with the push of a button
- 3 lights on: more than 50% of full battery capacity, 2 lights on: 20% to 50% of full battery capacity, 1 light on: less than 20% of full battery capacity Ribbed soft grip enables all finger tips to hold the handle securely against the strong rotational force of counter torque even in single handed operation Comes with: Battery charger 2x 5.0 Ah 18V li-ion batteries Makpac Type 2 carry case Long rigid side handle [https://www.youtube.com/watch?v= Rj P-ZPh 3268] Chuck Capacity: 1.5
- 13 mm Blows per Minute (Hi)
- ipm: 0
- 31, 500 ipm Blows per Minute (Lo)
- ipm: 0
- 8, 250 ipm No Load Speed (Hi): 0
- 2100 rpm No Load Speed (Lo): 0
- 550 rpm Voltage: 18 v Max. in wood: 76 mm Max. in masonry: 16 mm Max. in steel: 13 mm Torque Settings: 21 + drill Max. fastening torque (soft joint): 60 Nm Max. fastening torque (hard joint): 115 Nm Lock torque: 125 Nm Maximum output: 640w Battery Type: Lithium-ion Vibration K factor: 1.5 m/sec











...