This Makita 18 Volt Cordless Lithium Ion Combi Drill/ Impact Driver Twinpack is exclusive to Toolstop. Consists of the DHP453 Combi Drill, DTD146 Impact Driver, DC18RC Charger, Carry Case, 2 x BL1830 3.0 Ah Batteries & Makita 98P90B Holdall with Shoulder Strap. DHP453 Combi Drill

Features: Single sleeve keyless drill chuck for easy bit installation & removal Compact & lightweight design for easy handling High comfort grips
- non-slip even in wet conditions 2 Speed gearbox
- high / low speed change lever All metal gears
- for added life & durability Electronic brake control Forward/reverse Variable speed trigger DTD146 Impact Driver

Features: Very compact with overall length of only 138mm Weights only 1.5kg Phosphorescent bumper Enhanced dust & drip-proof performance New compact charger Battery level indicator Compact & lightweight, 4-pole motor LED Job light with afterglow Forward/reverse rotation Variable speed trigger Electronic brake Comes With: DHP453 Combi Drill DTD146 Impact Driver DC18RC Charger 2 x BL1830 Batteries Carry Case Holdall DHP453 Combi Drill Spec: Max in Steel: 13mm Max. in Wood: 36mm Max in Masonry: 13 Torque Settings S/H Nm: 16+ drill Max Torque: 27/42 Nm Blows per minute: H:0-19, 5000ipm L:0-6, 000bpm No Load Speed: H:0-1, 300rpm L:0-400rpm Net Weight: 3kgs DTD146 Impact Driver Spec: Max torque: 160 Nm Standard Bolt: M5-M14 Charging Time: 22 min No load speed: 0
- 2300rpm Impacts per minute: 3200 ipm

Dimensions: 138mm (L) x 79mm (W) x 236mm (H) Net weight: 1.3kg









...

Makita Combi Drill DHP458RMJ 18V Cordless li-ion Compact 2-speed (2 x 4.0 Ah Batteries) This Cordless Hammer Drill Driver from Makita is the Robust All Rounder, small & neat too. With an overall length of 225mm the extremely compact tool size allows for access to screws in tight spaces. The DHP458 is equipped with XPT (e Xtreme Protection Technology) essential in harsh outdoor enviroments as it gives added protection against dust & dripping water. For comfort during use the rubberised handle has been contoured & widened according to the U shape formed between the users thumb & index finger. High power & productivity are achieved with a new DC motor (FD31-30) which can be powered by 3 Ah BL1830 or 4 Ah BL1840 Batteries. People who bought this say, " It's very strong & lightweight, with no faults" " Great performance with plenty of power."

Features: Compact design, only 225mm overall length 2 speed all metal gearbox
- extra high transmission durability High operational efficiency with high torque Enhanced dust & drip-proof performance for use in outdoor applications or harsh environments Single sleeve keyless chuck allows for easy bit installation / removal by one hand Twin LED Job light with pre-glow & afterglow functions The power remaining in the battery can be indicated in 3 stages simply by pushing a button; 3 lights on: more than 50% of full battery capacity. 2 lights on: 20% to 50% of full battery capacity. 1 light on: less than 20% of full battery capacity Comes with: 2 x 4 Ah Li-ion Batteries DC18RC Battery charger Kitbox Handle Depth Gauge Machine compatible with Makita BL1830 & BL1840 batteries Electric Brake: Yes No Load Speed: 0-2000/400 rpm Max Torque S/H: 58 / 91 Nm Battery Type: Lithium-ion Torque Settings: 21 + drill Charging Time: 22 min Variable Speed Control Trigger: Yes Max. in masonry: 16 mm Max. in steel: 13 mm Max. in wood: 65 mm Fastening machine screw: 6mm Blows per Minute: 0-30000/6000 bpm Voltage: 18V Net weight: 7.5kg


...

Makita Combi Drill, Grinder, Jigsaw + Torch Kit (3 x 4.0 Ah Batteries) This e Xclusive Toolstop 18V Deal consists of the Makita DHP453Z LXT Li-Ion Combi Drill, Makita DGA452Z Cordless Li-ion Angle Grinder, Makita DJV180Z Cordless Li-ion Jigsaw, Makita BML185 18V LXT Lithium Ion Torch, 2 x Makita BL1840B (1967265-4) 4.0 Ah Lithium-Ion Batteries with a Makita Fast Battery Charger DC18RC Li-ion 14.4V
- 18V & Carry Case. DHP453 Combi Drill

Features: 2 Mechanical metal gears Electronic brake control Forward/reverse Variable speed trigger Double end Ph Bit DGA452 Angle Grinder

Features: Makita built produces 50% faster grinding with an impressive 10, 000 RPM More compact design at only 12-1/2" long & weighs only 5.6 lbs. for less operator fatigue Ergonomic shape fits like a glove with even pressure & easy control Built-in electronic control circuit with L.E.D. warning lights for overload protection Slide switch with lock-on Powerful angle grinder now free from the restriction of cables & power sockets Capable of using wheels or discs for mains grinders DJV180 Jigsaw Ergonomically rubberised handle provides comfortable gripping & more control while minimising hand fatigue & pain The large 2 finger variable speed trigger makes this jigsaw easy to operate even with gloves on 3 orbital settings + straight cut Blower will clear the pencil line of dust Tool-less blade change
- push in lock system enables very fast blade changes LED light will illuminate your cut line BML185 Torch

Features: Ergonomic Rubberised grip 4 position pivoting head Very lightweight & flexible BL1840B Battery

Features: Charge level indicator Foam cell technology Slide on battery
- firm holding with multi contacts & shock absorbing pack, will not puncture & remains cool even in heavy use Unbeatable 36 minute charge time DC18RC Charger

Features: The DC18RC has a cooling fan & Active 3 Controls This means that during the loading of the charging voltage, charging current, & temperature is held in the holes The cooling system blows cool air into the battery As a result, high temperatures occur in the battery, so that the battery life is extended, & the charging process is accelerated DHP453 Max in Steel: 13mm Max. in Wood: 36mm Max in Masonry: 13 Torque Settings S/H Nm: 16+ drill Max Torque: 27/42 Nm Blows per minute: H:0-19, 5000ipm L:0-6, 000bpm No Load Speed: H:0-1, 300rpm L:0-400rpm Net Weight: 1.9kgs DGA452 Grinding Wheel: 4-1/2" / 115mm Cut-Off Wheel: 4-1/2" Wire Cup Brush: 3-1/2" / 115mm Sanding Disc: 4-1/2" / 115mm No Load RPM: 10, 000 Watt Hours: 54.0 Battery: 18VDC (3.0 Ah) Spindle Thread: 5/8"
- 11 UNC Overall Length: 12-1/2" Net Weight: 5.6 Lbs. / 1.9kg DJV180 Max in steel: 10 mm Max in wood: 135 mm Strokes per Minute: 0-2600 spm Stroke Length: 26 mm Noise sound pressure: 78 d B (A) Noise K factor: 3 d B (A) Vibration K factor: 1.5 m/sec













...

Makita CP100DZ 10.8V Cordless Multi-Cutter CXT (Body Only) The Makita 10.8V CXT Li-ion Cordless Multi-Cutter is for home & professional use. Suitable for cutting a range of materials including: cardboard, carpet, vinyl & lino flooring, artificial grass, roofing felt, fibre-glass rendering mesh, damp-proof course, weed control membrane, tarpaulin, pallet strapping, wire mesh & more. Comes in a cardboard carton without battery or charger.

Features: Compact size for excellent manoeuvrability Ergonomic soft grip Lock-off button for safe operation Auto self-sharpening function: maintains sharp performance by automatically sharpening blade every time the blade rotates [https://www.youtube.com/watch?v=iw V1x Qk-Tl U] Battery Type: Lithium-ion Body only machine: Yes Voltage: 10.8 v Cutting Capacity: 6 mm Noise sound pressure: 70 d B (A) Noise K factor: 3 d B (A) No Load Speed: 300 rpm Vibration K factor: 1.5 m/sec

...

Makita CXT 10.8V Battery & Charger Set in Makpac Case (2 x 4.0 Ah Batteries) This e Xclusive Toolstop deal consists of 2 x BL1040B 4.0 Ah Batteries, a DC10WC Charger & a Type 1 Makpac Connector Case with Inlay. The Batteries feature a higher capacity than cluster type batteries as well as individual cell monitoring & a battery protection circuit. The new multi-contact slide design ensures that stable contact is always made even under extreme levels of vibration. It is also very easy to keep an eye on the battery fuel gauge thanks to the 4 stage LED system. The DC10WC will charge 10.8v CXT slide batteries in the following times: BL1015
- 50mins, BL1020B
- 70mins & BL1040B
- 130 mins. BL1040B

Features: Higher capacity than cluster type battery Individual cell monitoring Battery protection circuit Low temperature performance down to -20°C Battery fuel gauge (4-stage LEDs) Multi-contact slide type terminal ensures stable contact even under extreme vibration DC10WC

Features: Charging status indicator Compact & lightweight design Multi-contact slide type terminal Wall mountable for charging Comes With: 2 x BL1040B 4.0 Ah Batteries DC10WC 10.8v CXT Charger Makpac Type 1 Connector Case with Inlay






...

Makita D-00147 SDS Plus Drill Bit Standard 8.0 x 210 x 150mm 2 cutter SDS plus drill bit suitable for masonry & concrete. The solid carbide tip with centering point & optimised flutes offers fast drilling speeds in a low cost option. TCT tip manufactured to DIN 8039 available from 4mm
- 30mm diameter.

Features: Precision ground SDS Plus for Hammers Good drilling speed at low cost Application Concrete, Masonry, Fixings 2 Cutter TCT tip to DIN8039 Diameter (D): 8.0 mm Overall Length: 210 mm Shank: SDS-PLUS Working Length: 150 mm Pack Quantity: 1 Weight: 0.3kg


...

Makita D-00181 SDS Plus Drill Bit Standard 10.0 x 210 x 150mm 2 cutter SDS plus drill bit suitable for masonry & concrete. The solid carbide tip with centering point & optimised flutes offers fast drilling speeds in a low cost option. TCT tip manufactured to DIN 8039 available from 4mm
- 30mm diameter.

Features: Precision ground SDS Plus for Hammers Good drilling speed at low cost Application Concrete, Masonry, Fixings 2 Cutter TCT tip to DIN8039 Diameter (D): 10.0 mm Overall Length: 210 mm Shank: SDS-PLUS Working Length: 150 mm Pack Quantity: 1 Weight: 0.4kg


...

Makita D-03327 Circular Saw Blade for Wood 165 x 20 x 10 Teeth The Makita D-03327 is a Standard Blade for a Portable Saw. It has a Diameter of 165mm with a tooth count of 10, suited to fast cutting wiith a rough finish.

Features: Application: Wood, carpentry, joinery Good cutting speed at low cost

...

Makita D-03333 Circular Saw Blade 165 x 20 x 24 Teeth The D-03333 Circular Saw Blade is best suited to cutting wood & will fit the following Portable Circular Saws; The BSS611, BS610, BHS630 & the 5604. Made of cemented carbide is used for the longitudinal & transverse cuts. It does not require frequent sharpening. It is used when working with extruded tiles, laminated wood, plywood, furniture boards, soft & hard wood. The outer diameter
- 165 mm, internal
- 20 mm, width of cut
- 1, 3 mm, 24 teeth.

Features: Application: Wood, carpentry, joinery Good cutting speed at low cost




...

Makita D-03349 Circular Saw Blade for Wood 165 x 20 x 40 Teeth The Makita D-03349 is a Standard Blade for a Portable Saw. It has a Diameter of 165mm with a tooth count of 40, suited to slower cutting wiith a finer finish.

Features: Application: Wood, carpentry, joinery Good cutting speed at low cost

...