Makita CG100DZA 10.8V CXT Cordless Caulking Gun with 300ml Holder (Body Only) The CG100DZA is a high work efficiency cordless Caulking Gun powered by 10.8V Li-ion batteries (not supplied). The motor has 5 speed settings which can achieve a maximum pushing force of 5000 N. This model is sold without batteries or charger in a cardboard box.

Features: Variable speed trigger Anti-drip function Overload warning lamp Ergonomic soft grip Trigger lock LED job light 360

...

Makita CLX201AJ 2 Piece Cordless Kit 10.8V CXT Li-ion consisting of the DF331D Drill Driver, TD110D Impact Driver, 2 x 2.0 Ah Batteries, Charger & a Type 1 Makpac Connector Case Models DF331D & TD110D are both new 10.8V platform models. Succeeding the DF330 & TD090D they now come with slide on Compact e Xtreme Technology Batteries. The Makita DF331D Screwdriver gives a high operation efficiency delivered from high rotational speed & enhanced screw strip management. This fantastic wee drill-driver is small enough yet powerful enough for most tasks not requiring a hammer drill. The TD110D Impact Driver is so compact & easy to use. The rubberised handle has been designed for best grip & maximum thrust to the bit. Both models feature a single LED joblight with pre-glow & after-glow functions handy for working in dark conditions. DF331D

Features: Slide type Li-ion battery Electric brake Mechanical 2 speed transmission 18 torque settings Variable speed control trigger Keyless Chuck Equipped with Battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current Forward & reverse trigger LED job light Ergonomic soft grip Belt clip TD110D

Features: Slide type Li-ion battery Electric brake Variable speed control trigger Equipped with Battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current Forward & reverse trigger LED job light Ergonomic soft grip CXT Battery

Features: Higher battery capacity Individual cell monitoring Battery protection circuit Low temperature performance up to -20°C Battery fuel gauge (4-stage LED's) Multi-contact slide type terminal ensures stable contact even under extreme vibration Comes With: DC10WC charger 2 x BL1020B 2.0 Ah batteries Type 1 Makpac Carry Case 2 x double ended screwdriver bit





...

Makita CLX202AJ 2 Piece Cordless Kit 10.8V CXT Li-ion consisting of the HP331D Combi Drill, TD110D Impact Driver, 2 x 2.0 Ah Batteries, Charger & a Type 1 Makpac Connector Case Models HP331D & TD110D are both new 10.8V platform models. Succeeding the HP330D & TD090D they now come with slide on Compact e Xtreme Technology Batteries. The Makita HP331D was developed by adding hammer mechanism to drill driver model DF330D. So this is a reliable machine which has evolved over the years as is the TD110D Impact Driver which is so compact & easy to use. The rubberised handle has been designed for best grip & maximum thrust to the bit. Both models feature a single LED joblight with pre-glow & after-glow functions handy for working in dark conditions. HP331D

Features: Slide type Li-ion battery Electric brake Mechanical 2 speed transmission 18 torque settings Variable speed control trigger Keyless Chuck Equipped with Battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current Forward & reverse trigger LED job light Ergonomic soft grip TD110D

Features: Slide type Li-ion battery Electric brake Variable speed control trigger Equipped with Battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current Forward & reverse trigger LED job light Ergonomic soft grip CXT Battery

Features: Higher battery capacity Individual cell monitoring Battery protection circuit Low temperature performance up to -20°C Battery fuel gauge (4-stage LED's) Multi-contact slide type terminal ensures stable contact even under extreme vibration Comes With: DC10WC charger 2 x BL1020B 2.0 Ah batteries Type 1 Makpac Carry Case 2 double ended screwdriver bits





...

Makita CLX203AJX1 2 Piece Cordless Kit 10.8V CXT Li-ion consisting of the HP331D Combi Drill, TM30D Oscillating Multi-Tool with exhaust port, 2 x 2.0 Ah Batteries, 13 Accessories for TM30, Charger & a Type 1 Makpac Connector Case HP331D

Features: Slide type Li-ion battery Electric brake Mechanical 2 speed transmission 18 torque settings Variable speed control trigger Keyless Chuck Equipped with Battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current Forward & reverse trigger LED job light Ergonomic soft grip TM30D

Features: Variable speed control dial Soft start Anti-restart function LED job light Accessories can be installed at 12 x 30° increments, across 360° Ergonomically best possible barrel grip, with a perfect circumference size & shape whcih fits the hand for extra comfortable handling On-tool storage for hex wrench Can be connected to a dust extractor with the correct attachment CXT Battery

Features: Higher battery capacity Individual cell monitoring Battery protection circuit Low temperature performance up to -20°C Battery fuel gauge (4-stage LED's) Multi-contact slide type terminal ensures stable contact even under extreme vibration Comes With: DC10WC charger 2 x BL1020B 2.0 Ah batteries Type 2 Makpac Carry Case 13 Piece Accessory Set for multi-tool consisting of: Delta Backing Pad 90 x 90mm 10 x assorted delta sanding pads in 60, 80, 120, 180 & 240 Grit Makita TMA007 blade for wood Makita TMA009 for wood & metal





...

Makita CLX205AJ 2 Piece Cordless Kit 10.8V CXT Li-Ion (2 x 2.0 Ah Batteries) The CLX205AJ 2 Piece Cordless Kit from Makita comprises of the HP322D Combi Drill & the TD111D Impact Driver. The HP322D is able to deal with demanding use & equipped for screwdriving, drilling with or without hammer action in high or low speeds. The TD111D is at home in tight spaces. It may be small but delivers 135 Nm of torque from a powerful brushless motor. HP322D

Features: Very compact size 10mm keyless chuck Low power consumption thanks to Brushless motor LED light illuminates the work site Ideal for working in confined spaces Optimum grip design Battery protection system. Automatically turns off the power supply to the battery charge level is low All metal gear construction ensures a long service life 3 functions: screwing, drilling & drilling of stone (concrete) Belt clip TD111D

Features: New impact mode (A-mode): helps to eliminate "screw cam-out" & "cross threading" by driving at low speed until the start of tightening Variable speed Electric brake Forward/reverse rotation LED job light Compact design with overall length of 135mm Brushless motor Ergonomic soft grip Two selectable Impact Modes (Hard / Soft) Belt clip



...

Makita 2-Piece 18V Cordless Kit
- Combi Drill & Angle Grinder, Charger + Toolbag (2 x 4.0 Ah Batteries) This e Xclusive Toolstop
...

This Makita 18 Volt Cordless Lithium Ion Combi / Angle Drill Twinpack is exclusive to Toolstop. Consists of the DHP453 Combi Drill, DDA351 Angle Drill, DC18RC Charger, Carry Case, 2 x BL1830 3.0 Ah Batteries & Makita 98P90B Holdall with Shoulder Strap. DHP453 Combi Drill

Features: Single sleeve keyless drill chuck for easy bit installation & removal Compact & lightweight design for easy handling High comfort grips
- non-slip even in wet conditions 2 Speed gearbox
- high / low speed change lever All metal gears
- for added life & durability Electronic brake control Forward/reverse Variable speed trigger DDA351 Angle Drill

Features: New compact design with metal gear housing 4 pole LXT motor for enhanced performance LED light for job illumination Large lever switch for variable speed control Rubber anti-slip handle Forward/reverse rotation Electric brake Comes With: DHP453 Combi Drill DDA351 Angle Drill DC18RC Charger 2 x BL1830 Batteries Carry Case Holdall       DHP453 Combi Drill Spec: Max in Steel: 13mm Max. in Wood: 36mm Max in Masonry: 13 Torque Settings S/H Nm: 16+ drill Max Torque: 27/42 Nm Blows per minute: H:0-19, 5000ipm L:0-6, 000bpm No Load Speed: H:0-1, 300rpm L:0-400rpm Net Weight: 3kgs DDA351 Angle Drill Spec: Max in Steel: 10mm Max in Wood: 25mm Head height: 93mm No Load Speed: 0-1800rpm Max Torque: 13.7 Nm Net Weight: 1.8kgs 18 volts






...

This Makita 18 Volt Cordless Lithium Ion Combi Drill / Angle Grinder Twinpack is exclusive to Toolstop. Consists of the DHP453 Combi Drill, DGA452 Angle Grinder, DC18RC Charger, Carry Case, 2 x BL1830 3.0 Ah Batteries & Makita 98P90B Holdall with Shoulder Strap. DHP453 Combi Drill

Features: Single sleeve keyless drill chuck for easy bit installation & removal Compact & lightweight design for easy handling High comfort grips
- non-slip even in wet conditions 2 Speed gearbox
- high / low speed change lever All metal gears
- for added life & durability Electronic brake control Forward/reverse Variable speed trigger DGA452 Angle Grinder

Features: Powerful angle grinder now free from the restriction of cables & power sockets Capable of using wheels or discs for mains grinders Easy-to-grip, small circumference motor housing Anti-restart function Electronic current limiter Comes With: DHP453 Combi Drill DGA452 Angle Grinder DC18RC Charger 2 x BL1830 Batteries Carry Case Holdall       DHP453 Combi Drill Spec: Max in Steel: 13mm Max. in Wood: 36mm Max in Masonry: 13 Torque Settings S/H Nm: 16+ drill Max Torque: 27/42 Nm Blows per minute: H:0-19, 5000ipm L:0-6, 000bpm No Load Speed: H:0-1, 300rpm L:0-400rpm Net Weight: 3kgs DGA452 Angle Grinder Spec: Wheel

Size: 115mm Diameter No Load Speed: 10, 000rpm Net Weight: 1.9kg Battery: 3.0 Ah Li-ion 18 volts    








...

This Makita 18 Volt Cordless Lithium Ion Combi / Collated Screwdriver Twinpack is exclusive to Toolstop. Consists of the DHP453 Combi Drill, DFR550 Collated Screwdriver, DC18RC Charger, Carry Case, 2 x BL1830 3.0 Ah Batteries & Makita 98P90B Holdall with Shoulder Strap. DHP453 Combi Drill

Features: Single sleeve keyless drill chuck for easy bit installation & removal Compact & lightweight design for easy handling High comfort grips
- non-slip even in wet conditions 2 Speed gearbox
- high / low speed change lever All metal gears
- for added life & durability Electronic brake control Forward/reverse Variable speed trigger DFR550 Collated Screwdriver

Features: Forward/reverse rotation
- operable with one hand Adjustable Stopper Base with 7 different setting for different screw lengths
- 4 x 25
- 55m Rubber Cap securely fixed to Stopper Base for accurate positioning & slip prevention Anti tilt device
- prevents the screw from swaying Dust proof construction
- for smooth sliding action Silent clutch
- less noise at the end of driving process Screw Guide
- designed to keep screw strips from tangling & is foldable for tool storage & transportation Comes With: DHP453 Combi Drill DFR550 Collated Screwdriver DC18RC Charger 2 x BL1830 Batteries Carry Case Holdall       DHP453 Combi Drill Spec: Max in Steel: 13mm Max. in Wood: 36mm Max in Masonry: 13 Torque Settings S/H Nm: 16+ drill Max Torque: 27/42 Nm Blows per minute: H:0-19, 5000ipm L:0-6, 000bpm No Load Speed: H:0-1, 300rpm L:0-400rpm Net Weight: 3kgs DFR550 Collated Screwdriver Spec: Voltage: 18 v Drywall screw: 55 mm Max dry wall screw: 4mm x 55mm Screw Size Range: 25 to 55 mm Overall Length: 424mm Noise sound pressure: 78 d B (A) Noise K factor: 3 d B (A) No Load Speed: 4000 rpm Vibration K factor: 1.5 m/sec













...

This Makita 18 Volt Cordless Lithium Ion Combi Drill/ Impact Driver Twinpack is exclusive to Toolstop. Consists of the DHP453 Combi Drill, DTD146 Impact Driver, DC18RC Charger, Carry Case, 2 x BL1830 3.0 Ah Batteries & Makita 98P90B Holdall with Shoulder Strap. DHP453 Combi Drill

Features: Single sleeve keyless drill chuck for easy bit installation & removal Compact & lightweight design for easy handling High comfort grips
- non-slip even in wet conditions 2 Speed gearbox
- high / low speed change lever All metal gears
- for added life & durability Electronic brake control Forward/reverse Variable speed trigger DTD146 Impact Driver

Features: Very compact with overall length of only 138mm Weights only 1.5kg Phosphorescent bumper Enhanced dust & drip-proof performance New compact charger Battery level indicator Compact & lightweight, 4-pole motor LED Job light with afterglow Forward/reverse rotation Variable speed trigger Electronic brake Comes With: DHP453 Combi Drill DTD146 Impact Driver DC18RC Charger 2 x BL1830 Batteries Carry Case Holdall DHP453 Combi Drill Spec: Max in Steel: 13mm Max. in Wood: 36mm Max in Masonry: 13 Torque Settings S/H Nm: 16+ drill Max Torque: 27/42 Nm Blows per minute: H:0-19, 5000ipm L:0-6, 000bpm No Load Speed: H:0-1, 300rpm L:0-400rpm Net Weight: 3kgs DTD146 Impact Driver Spec: Max torque: 160 Nm Standard Bolt: M5-M14 Charging Time: 22 min No load speed: 0
- 2300rpm Impacts per minute: 3200 ipm

Dimensions: 138mm (L) x 79mm (W) x 236mm (H) Net weight: 1.3kg









...